All MIBs › ZHNLAYER2BRIDGING › interfaceReference
interfaceReference
Module: ZHNLAYER2BRIDGING
OID (symbolic): ZHNLAYER2BRIDGING::interfaceReference
OID (numeric): 1.3.6.1.4.1.5504.2.5.42.1.11.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This table should contain a single entry for each available LAN and WAN interface. For a WAN interface, this parameter is the full hierarchical parameter name of a particular WANConnectionDevice. A WANConnectionDevice is considered available (included in this table) only if it supports layer-2 bridged traffic. That is, this table MUST include only WANConnectionDevices that contain either a WANEthernetLinkConfig object, or that contain a WANDSLLinkConfig object for which the LinkType is EoA (Ethernet over ATM). For example: InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2
For a LAN interface, this parameter is the full hierarchical parameter name of a particular LAN InterfaceConfig object, or a WLANConfiguration object. This table SHOULD include one entry for each such object. For example: InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.2
For a WAN-side connection to the Gateway's IP router, this parameter is the full hierarchical parameter name of a particular WANConnection service. This table SHOULD include an entry for each layer-3 WAN connection. For example: InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2.WANPPPConnection.1
For a LAN-side connection to the Gateway's IP router, this parameter is the full hierarchical parameter name of a particular LANDevice. This table SHOULD include an entry for each LANDevice, each of which is associated with a LAN-side layer-3 connection to the Gateway's IP router. For example: InternetGatewayDevice.LANDevice.2
What is interfaceReference?
The full hierarchical TR-98 parameter name of the underlying LAN or WAN interface object this Available Interface entry represents, letting an admin trace an availableInterfaceKey back to the concrete interface or WAN connection it stands for.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.2.5.42.1.11.1.3 snmpwalk -v2c -c public <target> ZHNLAYER2BRIDGING::interfaceReference
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.2.5.42.1.11.1.3.1 snmpget -v2c -c public <target> ZHNLAYER2BRIDGING::interfaceReference.1
Start monitoring Zhone Technologies VoIP CPE devices (bridge-table capacity/port-membership/VLAN-filter config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHNLAYER2BRIDGING::interfaceReference OID value, configure state conditions and alerts, and monitor any Zhone Technologies VoIP CPE devices (bridge-table capacity/port-membership/VLAN-filter config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | Zhone | BITSTORM-HP-160-MIB |
| 1.3.6.1.4.1.5504.2 | zhoneProduct | Zhone |
| 1.3.6.1.4.1.5504.2.5 | zhoneWtn | Zhone |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.2.5.42 | zhnLayer2Bridging | ZHNLAYER2BRIDGING |
| 1.3.6.1.4.1.5504.2.5.42.1 | layer2BridgingObjects | ZHNLAYER2BRIDGING |
| 1.3.6.1.4.1.5504.2.5.42.1.11 | availableInterfaceTable | ZHNLAYER2BRIDGING |
| 1.3.6.1.4.1.5504.2.5.42.1.11.1 | availableInterfaceEntry | ZHNLAYER2BRIDGING |
| 1.3.6.1.4.1.5504.2.5.42.1.11.1.3 | interfaceReference | ZHNLAYER2BRIDGING |