All MIBs › ZHNLAYER2BRIDGING › filterInterface
filterInterface
Module: ZHNLAYER2BRIDGING
OID (symbolic): ZHNLAYER2BRIDGING::filterInterface
OID (numeric): 1.3.6.1.4.1.5504.2.5.42.1.9.1.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The interface or interfaces associated with this Filter table entry. The bridge corresponding to this Filter table entry is defined to admit packets on ingress to the bridge from the specified interfaces that meet all of the criteria specified in the Filter table entry. The following values are defined.
- To associate this Filter with a single interface listed in the AvailableInterface table, the Filter Interface value is set to the value of corresponding AvailableInterfaceKey.
- AllInterfaces indicates that this Filter is associated with all LAN and WAN interfaces listed in the AvailableInterface table (all entries of InterfaceType LANInterface or WANInterface).
- LANInterfaces indicates that this Filter is associated with all LAN interfaces listed in the AvailableInterface table (all entries of InterfaceType LANInterface).
- WANInterfaces indicates that this Filter is associated with all WAN interfaces listed in the AvailableInterface table (all entries of InterfaceType WANInterface).
- An empty string indicates the Filter table entry is not associated with any interface (and has no effect).
What is filterInterface?
Specifies which interface(s) this filter admits traffic from into its associated bridge — a single AvailableInterfaceKey, or the special values AllInterfaces, LANInterfaces, or WANInterfaces — with an empty string meaning the filter has no effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.2.5.42.1.9.1.5 snmpwalk -v2c -c public <target> ZHNLAYER2BRIDGING::filterInterface
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.2.5.42.1.9.1.5.1 snmpget -v2c -c public <target> ZHNLAYER2BRIDGING::filterInterface.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5504.2.5.42.1.9.1.5.1 s <value>
Start monitoring Zhone Technologies VoIP CPE devices (bridge-table capacity/port-membership/VLAN-filter config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHNLAYER2BRIDGING::filterInterface OID value, configure state conditions and alerts, and monitor any Zhone Technologies VoIP CPE devices (bridge-table capacity/port-membership/VLAN-filter config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | Zhone | BITSTORM-HP-160-MIB |
| 1.3.6.1.4.1.5504.2 | zhoneProduct | Zhone |
| 1.3.6.1.4.1.5504.2.5 | zhoneWtn | Zhone |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.2.5.42 | zhnLayer2Bridging | ZHNLAYER2BRIDGING |
| 1.3.6.1.4.1.5504.2.5.42.1 | layer2BridgingObjects | ZHNLAYER2BRIDGING |
| 1.3.6.1.4.1.5504.2.5.42.1.9 | filterBridgeTable | ZHNLAYER2BRIDGING |
| 1.3.6.1.4.1.5504.2.5.42.1.9.1 | filterBridgeEntry | ZHNLAYER2BRIDGING |
| 1.3.6.1.4.1.5504.2.5.42.1.9.1.5 | filterInterface | ZHNLAYER2BRIDGING |