All MIBs › XYLAN-ATM-CE-MIB › atmxCesSvcConfigRestart
atmxCesSvcConfigRestart
Module: XYLAN-ATM-CE-MIB
OID (symbolic): XYLAN-ATM-CE-MIB::atmxCesSvcConfigRestart
OID (numeric): 1.3.6.1.4.1.800.2.4.10.1.4.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When the value is set to 'restart' the active SVC is released if necessary and a new setup procedure is begun. As a result of this action, the atmxCesSvcConfigOperStatus object transitions to 'establishmentInProgress' (if not already in this state) and the atmxCesRetryFailures object is cleared.
When the value is set to 'noop' no operation is performed. When read, the value 'noop' is returned.
What is atmxCesSvcConfigRestart?
Setting this to restart releases the active SVC if necessary and begins a fresh setup attempt, moving atmxCesSvcConfigOperStatus to establishmentInProgress and clearing atmxCesSvcRetryFailures; setting it to noop does nothing, and reads back as noop otherwise. Use restart to manually kick a stuck SVC back into reconnecting after you've fixed whatever was blocking it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.800.2.4.10.1.4.1.1.11 snmpwalk -v2c -c public <target> XYLAN-ATM-CE-MIB::atmxCesSvcConfigRestart
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.800.2.4.10.1.4.1.1.11.1 snmpget -v2c -c public <target> XYLAN-ATM-CE-MIB::atmxCesSvcConfigRestart.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.800.2.4.10.1.4.1.1.11.1 i <value>
Start monitoring Xylan OmniSwitch ATM switch (ATM circuit-emulation-service cell-loss/clock-slip status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLAN-ATM-CE-MIB::atmxCesSvcConfigRestart OID value, configure state conditions and alerts, and monitor any Xylan OmniSwitch ATM switch (ATM circuit-emulation-service cell-loss/clock-slip status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.800 | xylan | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2 | xylanArch | XYLAN-BASE-MIB |
| 1.3.6.1.4.1.800.2.4 | xylanAtmArch | XYLAN-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.800.2.4.10 | atmxCesGroup | XYLAN-ATM-CE-MIB |
| 1.3.6.1.4.1.800.2.4.10.1 | atmxCesMIBObjects | XYLAN-ATM-CE-MIB |
| 1.3.6.1.4.1.800.2.4.10.1.4 | atmxCesSvcConfigGroup | XYLAN-ATM-CE-MIB |
| 1.3.6.1.4.1.800.2.4.10.1.4.1 | atmxCesSvcConfigTable | XYLAN-ATM-CE-MIB |
| 1.3.6.1.4.1.800.2.4.10.1.4.1.1 | atmxCesSvcConfigEntry | XYLAN-ATM-CE-MIB |
| 1.3.6.1.4.1.800.2.4.10.1.4.1.1.11 | atmxCesSvcConfigRestart | XYLAN-ATM-CE-MIB |