All MIBs › XUPS-MIB › xupsEnvRemoteHumidity
xupsEnvRemoteHumidity
Module: XUPS-MIB
OID (symbolic): XUPS-MIB::xupsEnvRemoteHumidity
OID (numeric): 1.3.6.1.4.1.534.1.6.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The reading of a remote humidity sensor connected to the UPS or SNMP agent.
What is xupsEnvRemoteHumidity?
Reports the relative humidity from a remote sensor connected to the UPS or SNMP card, letting an admin monitor humidity at a second location.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.534.1.6.6 snmpwalk -v2c -c public <target> XUPS-MIB::xupsEnvRemoteHumidity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.534.1.6.6.1 snmpget -v2c -c public <target> XUPS-MIB::xupsEnvRemoteHumidity.1
Start monitoring UPS unit, e.g. Powerware/Eaton-branded (battery/input-power-quality/firmware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XUPS-MIB::xupsEnvRemoteHumidity OID value, configure state conditions and alerts, and monitor any UPS unit, e.g. Powerware/Eaton-branded (battery/input-power-quality/firmware status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.534 | eaton | EATON-OIDS |
| 1.3.6.1.4.1.534.1 | xupsMIB | EATON-OIDS |
| 1.3.6.1.4.1.534.1.6 | xupsEnvironment | EATON-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.534.1.6.6 | xupsEnvRemoteHumidity | XUPS-MIB |