All MIBs › XF-RADIOLINK-PTP-RADIO-MIB › xfRAUAlarmStatus
xfRAUAlarmStatus
Module: XF-RADIOLINK-PTP-RADIO-MIB
OID (symbolic): XF-RADIOLINK-PTP-RADIO-MIB::xfRAUAlarmStatus
OID (numeric): 1.3.6.1.4.1.193.81.3.4.3.1.1.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: This object shows the alarm status of the radio unit. atpcCability - The terminal is configured for ATPC, but the radio does not support ATPC. This alarm is activated only if ATPC is turned on (any direction). sdcHwErrorMain - Received RF input signal level for Main path (of SDC TRX) has dropped below the threshold for the receiver. sdcHwErrorDiv - Received RF input signal level for Diversity path (of SDC TRX) has dropped below the threshold for the receiver. sdcDadeCalMismatch - A TRX is connected and its Serial Number doesn't match with the serial number stored into MO xfTRXSdcSerialNumber. insufficientResourceRauXpic - Connected RAU is missing capabilities for XPIC. companionRauMismatch - Connected RAU does not match with the companion one, either in 1+1 RLP or XPIC.
What is xfRAUAlarmStatus?
A read-only BITS field reporting radio-unit-level alarms such as atpcCapability (ATPC turned on but the radio doesn't support it), sdcHwErrorMain/Div (SDC receive path signal dropped below threshold), sdcDadeCalMismatch (connected TRX serial number doesn't match the stored calibration), insufficientResourceRauXpic (radio lacks XPIC capability), and companionRauMismatch (paired RAU in 1+1/XPIC doesn't match). An admin checks this bitmap first when a radio link is degraded, since it points to the specific hardware/configuration mismatch causing the problem.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.81.3.4.3.1.1.1.1 snmpwalk -v2c -c public <target> XF-RADIOLINK-PTP-RADIO-MIB::xfRAUAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.81.3.4.3.1.1.1.1.1 snmpget -v2c -c public <target> XF-RADIOLINK-PTP-RADIO-MIB::xfRAUAlarmStatus.1
Start monitoring Ericsson XF/MINI-LINK point-to-point microwave radio unit (TX-power/RX-signal-level status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XF-RADIOLINK-PTP-RADIO-MIB::xfRAUAlarmStatus OID value, configure state conditions and alerts, and monitor any Ericsson XF/MINI-LINK point-to-point microwave radio unit (TX-power/RX-signal-level status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.81 | miniLinkXF | XF-TOP-MIB |
| 1.3.6.1.4.1.193.81.3 | xfMediaSpecific | XF-TOP-MIB |
| 1.3.6.1.4.1.193.81.3.4 | xfRadioLink | XF-TOP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.81.3.4.3 | xfRadioLinkPtpRadioMIB | XF-RADIOLINK-PTP-RADIO-MIB |
| 1.3.6.1.4.1.193.81.3.4.3.1 | xfRadioLinkPtpRadioObjects | XF-RADIOLINK-PTP-RADIO-MIB |
| 1.3.6.1.4.1.193.81.3.4.3.1.1 | xfRAUTable | XF-RADIOLINK-PTP-RADIO-MIB |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1 | xfRAUEntry | XF-RADIOLINK-PTP-RADIO-MIB |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.1 | xfRAUAlarmStatus | XF-RADIOLINK-PTP-RADIO-MIB |