XEDIA-DS1-MIB :: xdsx1CfgTestCode

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › XEDIA-DS1-MIB › xdsx1CfgTestCode

xdsx1CfgTestCode

Module: XEDIA-DS1-MIB

OID (symbolic): XEDIA-DS1-MIB::xdsx1CfgTestCode

OID (numeric): 1.3.6.1.4.1.838.3.18.2.1.1.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean:

xdsx1SendNone - sending looped or normal data

xdsx1PRBS2E11 - E11, f - framed-mode z - zero-limit mode fz - framed-mode and zero-limit mode

xdsx1PRBS2E15 - E15, f - framed-mode z - zero-limit mode fz - framed-mode and zero-limit mode

xdsx1PRBS2E20 - E20, f - framed-mode z - zero-limit mode fz - framed-mode and zero-limit mode

xdsx1PRBS2E23 - E23, f - framed-mode z - zero-limit mode fz - framed-mode and zero-limit mode

What is xdsx1CfgTestCode?

Sets the type of test pattern (e.g. various PRBS sequences, framed or zero-limit variants) being transmitted across this DS1 interface for line testing; defaults to sendNone (normal or looped data, no test pattern).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.838.3.18.2.1.1.14
snmpwalk -v2c -c public <target> XEDIA-DS1-MIB::xdsx1CfgTestCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.838.3.18.2.1.1.14.1
snmpget -v2c -c public <target> XEDIA-DS1-MIB::xdsx1CfgTestCode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.838.3.18.2.1.1.14.1 i <value>

Start monitoring Xedia Corporation routers/access devices with DS1 (T1/E1) interfaces (bit-level alarm/loopback-test status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XEDIA-DS1-MIB::xdsx1CfgTestCode OID value, configure state conditions and alerts, and monitor any Xedia Corporation routers/access devices with DS1 (T1/E1) interfaces (bit-level alarm/loopback-test status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.838xediaXEDIA-REG
1.3.6.1.4.1.838.3xediaMibsXEDIA-REG
Numeric OIDNameModule
1.3.6.1.4.1.838.3.18xediaDs1MIBXEDIA-DS1-MIB
1.3.6.1.4.1.838.3.18.2xDs1TablesXEDIA-DS1-MIB
1.3.6.1.4.1.838.3.18.2.1xDsx1ConfigTableXEDIA-DS1-MIB
1.3.6.1.4.1.838.3.18.2.1.1xDsx1ConfigEntryXEDIA-DS1-MIB
1.3.6.1.4.1.838.3.18.2.1.1.14xdsx1CfgTestCodeXEDIA-DS1-MIB