XEDIA-DS1-MIB :: xdsx1CfgCrcMode

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › XEDIA-DS1-MIB › xdsx1CfgCrcMode

xdsx1CfgCrcMode

Module: XEDIA-DS1-MIB

OID (symbolic): XEDIA-DS1-MIB::xdsx1CfgCrcMode

OID (numeric): 1.3.6.1.4.1.838.3.18.2.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The configured CRC mode of the interface.

What is xdsx1CfgCrcMode?

Sets the CRC mode used on this DS1 interface - crc16(1, the default), crc32(2), or crcnone(3) to disable CRC checking.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.838.3.18.2.1.1.3
snmpwalk -v2c -c public <target> XEDIA-DS1-MIB::xdsx1CfgCrcMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.838.3.18.2.1.1.3.1
snmpget -v2c -c public <target> XEDIA-DS1-MIB::xdsx1CfgCrcMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.838.3.18.2.1.1.3.1 i <value>

Start monitoring Xedia Corporation routers/access devices with DS1 (T1/E1) interfaces (bit-level alarm/loopback-test status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XEDIA-DS1-MIB::xdsx1CfgCrcMode OID value, configure state conditions and alerts, and monitor any Xedia Corporation routers/access devices with DS1 (T1/E1) interfaces (bit-level alarm/loopback-test status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.838xediaXEDIA-REG
1.3.6.1.4.1.838.3xediaMibsXEDIA-REG
Numeric OIDNameModule
1.3.6.1.4.1.838.3.18xediaDs1MIBXEDIA-DS1-MIB
1.3.6.1.4.1.838.3.18.2xDs1TablesXEDIA-DS1-MIB
1.3.6.1.4.1.838.3.18.2.1xDsx1ConfigTableXEDIA-DS1-MIB
1.3.6.1.4.1.838.3.18.2.1.1xDsx1ConfigEntryXEDIA-DS1-MIB
1.3.6.1.4.1.838.3.18.2.1.1.3xdsx1CfgCrcModeXEDIA-DS1-MIB