XAVI-XG6846-MIB

All MIBs › XAVI-XG6846-MIB

Category: Miscellaneous and Vendor Registration

Description: Manages Xavi XG6846 VDSL2 gateway device configuration, line statistics, and interface status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is XAVI-XG6846-MIB?

XAVI-XG6846-MIB is a Xavi Technologies vendor MIB for the XG6846 VDSL2 gateway/router, covering its LAN switch, CATV pass-through, and QoS functions alongside DSL line management. It exposes configuration data for LAN ports (name, speed, flow-control/pause), the CATV switch feature, and per-port QoS mapping tables. Its monitoring role focuses on interface/software configuration status: administrators check lanportspeed and lanportpause to confirm negotiated LAN port settings and catvEnable to confirm whether the CATV pass-through function is active, useful for diagnosing LAN connectivity or triple-play service issues. It appears to be a largely self-contained device MIB without strong dependency on standard IETF MIBs beyond general interface conventions. It is deployed on Xavi XG6846 VDSL2 gateways used by ISPs/CPE deployments providing broadband and CATV/triple-play services to subscribers. Engineers can download the XAVI-XG6846-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in XAVI-XG6846-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Xavi XG6846 VDSL2 gateway/CPE router

Monitoring Examples

An admin would walk lanportTable to check lanportName, lanportspeed, and lanportpause for each LAN port, catching a port stuck at an unexpectedly low speed or with pause frames disabled when they shouldn't be. catvEnable would be checked to confirm the CATV switch function is turned on for triple-play deployments where it's expected. qosTable/qosEntry with qmapping would be reviewed to verify traffic is being mapped to the correct QoS class after a configuration change.

What Can Be Monitored

LAN port speed and flow-control (pause) status
CATV switch function enable state
per-port QoS class mapping
port table configuration status

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32
enterprises
mib-2
snmpModules

From SNMPv2-TC

DisplayString
TestAndIncr
TimeStamp

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR action	1.3.6.1.4.1.12919.9.4	DisplayString	read-write	Get or Put file action,g for get file and p for put file.
INT adminStatus	1.3.6.1.4.1.12919.9.5	INTEGER	read-write	administrative status.
STR bias	1.3.6.1.4.1.12919.6.7	DisplayString	read-only	DDM Bias.
U32 broadcastsReceived	1.3.6.1.4.1.12919.5.1.1.4	Unsigned32	read-only	broadcasts Received.
U32 broadcastsTransmitted	1.3.6.1.4.1.12919.5.1.1.9	Unsigned32	read-only	broadcasts Transmitted.
catv	1.3.6.1.4.1.12919.1
INT catvEnable	1.3.6.1.4.1.12919.1.1	INTEGER	read-write	catv switch function.
ddminfo	1.3.6.1.4.1.12919.6
deviceinfo	1.3.6.1.4.1.12919.12
STR domainame	1.3.6.1.4.1.12919.7.3	DisplayString	read-write	the dns domain name.
INT dscpEnable	1.3.6.1.4.1.12919.4.1.1.5	INTEGER	read-write	DSCP enable.
U32 fcsErrorReceived	1.3.6.1.4.1.12919.5.1.1.6	Unsigned32	read-only	fcsError Received.
U32 fcsErrorTransmitted	1.3.6.1.4.1.12919.5.1.1.11	Unsigned32	read-only	fcsError Transmitted.
STR fileName	1.3.6.1.4.1.12919.9.2	DisplayString	read-write	The file name.
STR fileType	1.3.6.1.4.1.12919.9.3	DisplayString	read-write	i for image and c for configuration data
groupEntry	1.3.6.1.4.1.12919.4.2.1		read-write	vlan group list entry.
U32 groupid	1.3.6.1.4.1.12919.4.2.1.2	Unsigned32	read-write	vlan group id.
U32 groupIndex	1.3.6.1.4.1.12919.4.2.1.1	Unsigned32	read-only	vlan group index.
STR hostname	1.3.6.1.4.1.12919.7.2	DisplayString	read-write	the dns host name.
internetPort	1.3.6.1.4.1.12919.7
jumb	1.3.6.1.4.1.12919.11
INT jumblan1	1.3.6.1.4.1.12919.11.1	INTEGER	read-write	lan jumb mode 1522/2048/10240.
INT jumblan2	1.3.6.1.4.1.12919.11.2	INTEGER	read-write	lan jumb mode 1522/2048/10240.
INT jumblan3	1.3.6.1.4.1.12919.11.3	INTEGER	read-write	lan jumb mode 1522/2048/10240.
INT jumblan4	1.3.6.1.4.1.12919.11.4	INTEGER	read-write	lan jumb mode 1522/2048/10240.
INT jumbwan	1.3.6.1.4.1.12919.11.5	INTEGER	read-write	lan jumb mode 1522/2048/10240.
INT lan1	1.3.6.1.4.1.12919.4.2.1.3	INTEGER	read-write	vlan group id.
INT lan2	1.3.6.1.4.1.12919.4.2.1.4	INTEGER	read-write	vlan group id.
INT lan3	1.3.6.1.4.1.12919.4.2.1.5	INTEGER	read-write	vlan group id.
INT lan4	1.3.6.1.4.1.12919.4.2.1.6	INTEGER	read-write	vlan group id.
U32 lanportIndex	1.3.6.1.4.1.12919.2.1.1.1	Unsigned32	read-only	lan port entry index.
STR lanportName	1.3.6.1.4.1.12919.2.1.1.2	DisplayString	read-only	lan port name.
INT lanportpause	1.3.6.1.4.1.12919.2.1.1.4	INTEGER	read-write	port 802.1P enable/disable value.
INT lanportspeed	1.3.6.1.4.1.12919.2.1.1.3	INTEGER	read-write	port speed value.
lanportTable	1.3.6.1.4.1.12919.2.1		read-write	LAN port table.
modeEntry	1.3.6.1.4.1.12919.2.1.1		read-write	set port mode entry.
U32 multicastsReceived	1.3.6.1.4.1.12919.5.1.1.5	Unsigned32	read-only	multicasts Received.
U32 multicastsTransmitted	1.3.6.1.4.1.12919.5.1.1.10	Unsigned32	read-only	multicasts Transmitted.
INT operStatus	1.3.6.1.4.1.12919.9.6	INTEGER	read-only	vendor specific info.
U32 pauseReceived	1.3.6.1.4.1.12919.5.1.1.7	Unsigned32	read-only	pause Received.
U32 pauseTransmitted	1.3.6.1.4.1.12919.5.1.1.12	Unsigned32	read-only	pause Transmitted.
INT port1	1.3.6.1.4.1.12919.10.1	INTEGER	read-write	lan port enable/disable.
INT port2	1.3.6.1.4.1.12919.10.2	INTEGER	read-write	lan port enable/disable.
INT port3	1.3.6.1.4.1.12919.10.3	INTEGER	read-write	lan port enable/disable.
INT port4	1.3.6.1.4.1.12919.10.4	INTEGER	read-write	lan port enable/disable.
portEntry	1.3.6.1.4.1.12919.4.1.1		read-write	port list entry.
U32 portIndex	1.3.6.1.4.1.12919.4.1.1.1	Unsigned32	read-only	port num index.
portmode	1.3.6.1.4.1.12919.2
STR portName	1.3.6.1.4.1.12919.5.1.1.2	DisplayString	read-only	port name.
portPower	1.3.6.1.4.1.12919.10
portStatEntry	1.3.6.1.4.1.12919.5.1.1		read-write	port statistics list entry.
portStatistic	1.3.6.1.4.1.12919.5
portTable	1.3.6.1.4.1.12919.4.1		read-write	all port setting table.
STR primaryDns	1.3.6.1.4.1.12919.7.5	DisplayString	read-write	the primary dns.
U32 priority	1.3.6.1.4.1.12919.4.1.1.3	Unsigned32	read-write	port default priority value.
U32 qmapping	1.3.6.1.4.1.12919.3.1.1.2	Unsigned32	read-write	mapping queue value.
INT qmode	1.3.6.1.4.1.12919.4.1.1.4	INTEGER	read-write	port 802.1Q mode value.
qos	1.3.6.1.4.1.12919.3
qosEntry	1.3.6.1.4.1.12919.3.1.1		read-write	qos list entry.
U32 qosIndex	1.3.6.1.4.1.12919.3.1.1.1	Unsigned32	read-only	qos list entry index.
qosTable	1.3.6.1.4.1.12919.3.1		read-write	qos table.
reboot	1.3.6.1.4.1.12919.8
INT rebootEnable	1.3.6.1.4.1.12919.8.1	INTEGER	read-write	catv switch function.
STR rxPower	1.3.6.1.4.1.12919.6.9	DisplayString	read-only	DDM Rx Power.
STR secondaryDns	1.3.6.1.4.1.12919.7.6	DisplayString	read-write	the secodary dns.
STR serialnum	1.3.6.1.4.1.12919.12.1	DisplayString	read-only	display device serial number.
STR speed	1.3.6.1.4.1.12919.5.1.1.13	DisplayString	read-only	port speed duplex mode status.
INT staticDns	1.3.6.1.4.1.12919.7.4	INTEGER	read-write	static dns enable.
STR staticIpAddr	1.3.6.1.4.1.12919.7.9	DisplayString	read-write	The static ip address .
STR staticIpDomainName	1.3.6.1.4.1.12919.7.8	DisplayString	read-write	the static ip dns domain name.
STR staticIpGateway	1.3.6.1.4.1.12919.7.11	DisplayString	read-write	The static gateway .
STR staticIpHostName	1.3.6.1.4.1.12919.7.7	DisplayString	read-write	the static Ip dns host name.
STR staticIpPrimaryDns	1.3.6.1.4.1.12919.7.12	DisplayString	read-write	the primary dns.
STR staticIpSecondaryDns	1.3.6.1.4.1.12919.7.13	DisplayString	read-write	the secodary dns.
STR staticIpSubMask	1.3.6.1.4.1.12919.7.10	DisplayString	read-write	The static subnet mask .
U32 statIndex	1.3.6.1.4.1.12919.5.1.1.1	Unsigned32	read-only	ports entry index.
statisticTable	1.3.6.1.4.1.12919.5.1		read-write	port statistics table.
STR temperature	1.3.6.1.4.1.12919.6.5	DisplayString	read-only	DDM Temperature.
tftp	1.3.6.1.4.1.12919.9
IP tftpSevIp	1.3.6.1.4.1.12919.9.1	IpAddress	read-write	The tftp server ip.
STR txPower	1.3.6.1.4.1.12919.6.8	DisplayString	read-only	DDM TX Power.
U32 unicastsReceived	1.3.6.1.4.1.12919.5.1.1.3	Unsigned32	read-only	unicasts Received.
U32 unicastsTransmitted	1.3.6.1.4.1.12919.5.1.1.8	Unsigned32	read-only	unicasts Transmitted.
STR vendorName	1.3.6.1.4.1.12919.6.1	DisplayString	read-only	DDM Vendor Name.
STR vendorOui	1.3.6.1.4.1.12919.6.2	DisplayString	read-only	DDM Vendor OUI.
STR vendorPn	1.3.6.1.4.1.12919.6.3	DisplayString	read-only	DDM Vendor PN.
STR vendorRev	1.3.6.1.4.1.12919.6.4	DisplayString	read-only	DDM Vendor REV.
vlan	1.3.6.1.4.1.12919.4
vlangroupTable	1.3.6.1.4.1.12919.4.2		read-write	VLAN group setting table.
U32 vlanid	1.3.6.1.4.1.12919.4.1.1.2	Unsigned32	read-write	port vlan id value.
STR voltage	1.3.6.1.4.1.12919.6.6	DisplayString	read-only	DDM Voltage.
INT wan	1.3.6.1.4.1.12919.4.2.1.7	INTEGER	read-write	vlan group id.
INT wanType	1.3.6.1.4.1.12919.7.1	INTEGER	read-write	wan protocol type.
xg6846	1.3.6.1.4.1.12919

RFC description

Management MIB for XAVI XG6846 DSL CPE providing CATV, port, QoS, VLAN, and device configuration monitoring.

Start monitoring Xavi XG6846 VDSL2 gateway/CPE router (LAN-port speed/CATV-pass-through config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download XAVI-XG6846-MIB

What Is XAVI-XG6846-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description