WspServer-MIB

All MIBs › WspServer-MIB

Category: Streaming and Media

Description: Monitors WAP gateway server session counts, bearer connections, and protocol processing statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WspServer-MIB?

This is a WAP (Wireless Application Protocol) Session Protocol server MIB, likely from a WAP gateway vendor, defining objects for monitoring a WSP server that mediates between mobile clients and web content over legacy WAP-based mobile networks. It exposes performance and connection-oriented data: session counts, bearer connection counts (the underlying transport carrying WAP traffic, e.g., SMS/GPRS/CSD), and protocol processing statistics for the WSP layer. Its monitoring value centers on software-service health: session count trends indicate gateway load, bearer connection statistics reveal whether the underlying mobile bearer network is delivering connections reliably, and protocol processing statistics can surface WSP-layer errors or processing bottlenecks similar to a service/process health indicator on the gateway server. No explicit dependency on other MIBs is indicated, though it would typically sit alongside general host/system MIBs on the same gateway server. It is typically deployed on WAP gateway servers within a mobile operator's network, used by operations staff to track WAP session load and bearer performance, particularly relevant to older 2G/3G-era mobile data deployments. Engineers can download the WspServer-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WspServer-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

WAP gateway server

Monitoring Examples

No specific object or table names are available for this module in the source excerpt, so a concrete polling scenario cannot be grounded in real identifiers. Based on its stated purpose, an administrator would typically poll session-count and bearer-connection objects (analogous to a wspActiveSessions or wspBearerConnectionsTable) to track WAP gateway load and confirm bearer connections are being established successfully. A sustained drop in active sessions alongside stable bearer connections could indicate a WSP protocol processing fault on the gateway rather than an underlying network issue.

What Can Be Monitored

active WSP session count
bearer connection count
protocol processing statistics

Imported Objects

From InternetServer-MIB

internetServer

OBJECT-IDENTITY

From RFC1155-SMI

Counter
OBJECT-TYPE
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
wspServer	1.3.6.1.4.1.311.1.7.12
wspStatistics	1.3.6.1.4.1.311.1.7.12.1
INT activeSessions	1.3.6.1.4.1.311.1.7.12.1.1	INTEGER	read-only	The number of active Firewall service sessions.
INT activeTCPConnections	1.3.6.1.4.1.311.1.7.12.1.2	INTEGER	read-only	The total number of active TCP connections currently passing data. Connections pending or not yet established are counted elsewhere.
INT activeUDPConnections	1.3.6.1.4.1.311.1.7.12.1.3	INTEGER	read-only	The total number of active UDP connections.
INT connectingTCPConnections	1.3.6.1.4.1.311.1.7.12.1.4	INTEGER	read-only	The total number of TCP connections pending. This is the total number of connections that are waiting for a connect call to finish.
INT backConnectingTCPConnections	1.3.6.1.4.1.311.1.7.12.1.5	INTEGER	read-only	The total number of TCP connections awaiting an inbound connect call to finish. These are connections from the Firewall service to a Firewall client after the Firewall service accepted a connection from the Internet on a listening socket.
INT acceptingTCPConnections	1.3.6.1.4.1.311.1.7.12.1.6	INTEGER	read-only	The number of connection objects waiting for a TCP connection from the Firewall client after a successful remote connection.
INT listeningTCPConnections	1.3.6.1.4.1.311.1.7.12.1.7	INTEGER	read-only	The number of connection objects waiting for TCP connections from remote Internet computers (after a successful listen).
CTR allocFailureLogs	1.3.6.1.4.1.311.1.7.12.1.8	Counter	read-only	Number of memory allocation errors.
CTR pumpTotalRead	1.3.6.1.4.1.311.1.7.12.1.9	Counter	read-only	Number of bytes read by the data-pump per second.
CTR pumpTotalWrite	1.3.6.1.4.1.311.1.7.12.1.10	Counter	read-only	Number of bytes written by data-pump per second.
CTR pendingGetXByY	1.3.6.1.4.1.311.1.7.12.1.11	Counter	read-only	Number of gethostbyname and gethostbyaddr API calls pending resolution. These are calls used to resolve host DNS domain names and IP addresses for Firewall service connections.
CTR successGetXByY	1.3.6.1.4.1.311.1.7.12.1.12	Counter	read-only	Number of gethostbyname and gethostbyaddr API calls successfully returned. These are calls used to resolve host DNS domain names and IP addresses for Firewall service connections.
CTR failedGetXByY	1.3.6.1.4.1.311.1.7.12.1.13	Counter	read-only	Number of gethostbyname and gethostbyaddr API calls that have failed. These are calls used to resolve host DNS domain names and IP addresses for Firewall service connections.
CTR ctrlWorkerThreads	1.3.6.1.4.1.311.1.7.12.1.14	Counter	read-only	The number of Firewall service worker threads that are currently alive.
INT ctrlAvailableWorkerThreads	1.3.6.1.4.1.311.1.7.12.1.15	INTEGER	read-only	The number of Firewall service worker threads that are available (waiting in completion port queue).
INT mappings	1.3.6.1.4.1.311.1.7.12.1.16	INTEGER	read-only	The number of mappings available for UDP connections.
INT pNATMappings	1.3.6.1.4.1.311.1.7.12.1.17	INTEGER	read-only	The number of mappings created by SecureNAT.
INT kernelDataPumps	1.3.6.1.4.1.311.1.7.12.1.18	INTEGER	read-only	The number of kernel mode data pumps created by the Firewall service.
CTR kernelTotalTCPBytes	1.3.6.1.4.1.311.1.7.12.1.19	Counter	read-only	Number of TCP bytes transferred by the kernel mode data-pump per second.
CTR kernelTotalUDPBytes	1.3.6.1.4.1.311.1.7.12.1.20	Counter	read-only	Number of UDP bytes transferred by the kernel mode data-pump per second.
CTR dnsCacheEntries	1.3.6.1.4.1.311.1.7.12.1.21	Counter	read-only	The current number of DNS domain name entries cached by the Firewall service.
CTR dnsCacheHits	1.3.6.1.4.1.311.1.7.12.1.22	Counter	read-only	The total number of times a DNS domain name was found within the DNS Cache.
CTR dnsCacheFlushes	1.3.6.1.4.1.311.1.7.12.1.23	Counter	read-only	The total number of times that the DNS domain name cache has been flushed or cleared by the Web Proxy Server.
CTR dnsCacheRetrievals	1.3.6.1.4.1.311.1.7.12.1.24	Counter	read-only	The total number of DNS domain names that have been retrieved by the Firewall service.
INT dnsCacheRatio	1.3.6.1.4.1.311.1.7.12.1.25	INTEGER	read-only	The percentage of DNS domain names serviced by the DNS cache, out of a total of all DNS entries that have been retrieved by the Firewall service.

RFC description

Monitors Windows ISA Server Firewall proxy statistics including active sessions and TCP/UDP connection counts.

Start monitoring WAP gateway server (WSP session-count/bearer-connection status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WspServer-MIB

What Is WspServer-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description