| OID symbolic | OID numeric | Type | Access | Description |
|---|
| wfHwModuleTable | 1.3.6.1.4.1.18.3.1.4.1 | | not-accessible | Hardware Module Table
Filled in by the Module Driver. Read by SNMP to
build the driver load records |
| wfHwModuleEntry | 1.3.6.1.4.1.18.3.1.4.1.1 | | not-accessible | Hardware specific information about a slot. |
| INT wfHwModuleSlot | 1.3.6.1.4.1.18.3.1.4.1.1.1 | INTEGER | read-only | A unique value for each slot.
Its value ranges between 1 and 4. |
| INT wfHwModuleModule | 1.3.6.1.4.1.18.3.1.4.1.1.2 | INTEGER | read-only | This value ranges between 1 and 4 |
| INT wfHwModuleModIdOpt | 1.3.6.1.4.1.18.3.1.4.1.1.3 | INTEGER | read-only | Module IDs for the net modules modules |
| OCT wfHwModuleModRev | 1.3.6.1.4.1.18.3.1.4.1.1.4 | OCTET STRING | read-only | The revision level of the module. High byte is in upper 2 bytes. |
| OCT wfHwModuleModSerialNumber | 1.3.6.1.4.1.18.3.1.4.1.1.5 | OCTET STRING | read-only | The serial number of the module. |
| STR wfHwModuleArtworkRev | 1.3.6.1.4.1.18.3.1.4.1.1.6 | DisplayString | read-only | The Artwork Revision number of the module |
| INT wfHwModuleMemorySize1 | 1.3.6.1.4.1.18.3.1.4.1.1.7 | INTEGER | read-only | Size (in bytes) of memory #1. |
| INT wfHwModuleMemorySize2 | 1.3.6.1.4.1.18.3.1.4.1.1.8 | INTEGER | read-only | Size (in bytes) of memory #2. |
| INT wfHwModuleDaughterBdIdOpt | 1.3.6.1.4.1.18.3.1.4.1.1.9 | INTEGER | read-only | Daughterboard IDs that may be attached to net modules |
| INT wfHwModuleLEDStatus1 | 1.3.6.1.4.1.18.3.1.4.1.1.10 | INTEGER | read-only | Bit mask representing the status of the LEDs on the module.
Each LED is represented by 2 bits. LED #1 status is
indicated by the 2 least significant bits. LED #16 status
is indicated by the 2 most significant bits. How this bit
mask is interpreted depends on the module ID. For example,
some modules use this value to report what color the LED
is currently set to ('00' off, '01' yellow, '10' green).
This value can be used by a NMS that needs to know this
information for whatever reason. Some modules may not
support this value in which case it should be set to zero. |
| INT wfHwModuleLEDState1 | 1.3.6.1.4.1.18.3.1.4.1.1.11 | INTEGER | read-only | Bit mask representing the state of the LEDs on the module.
Each LED is represented by 2 bits. LED #1 state is
indicated by the 2 least significant bits. LED #16 state
is indicated by the 2 most significant bits. How this bit
mask is interpreted depends on the module ID. For example,
some modules use this value to indicate a LED is flashing
(value of '01') or a solid color (value of '00').
This value can be used by a NMS that needs to know this
information for whatever reason. Some modules may not
support this value in which case it should be set to zero. |
| INT wfHwModuleLEDStatus2 | 1.3.6.1.4.1.18.3.1.4.1.1.12 | INTEGER | read-only | Bit mask representing the status of the LEDs on the module.
Each LED is represented by 2 bits. LED #17 status is
indicated by the 2 least significant bits. LED #32 status
is indicated by the 2 most significant bits. How this bit
mask is interpreted depends on the module ID. For example,
some modules use this value to report what color the LED
is currently set to ('00' off, '01' yellow, '10' green).
This value can be used by a NMS that needs to know this
information for whatever reason. Some modules may not
support this value in which case it should be set to zero. |
| INT wfHwModuleLEDState2 | 1.3.6.1.4.1.18.3.1.4.1.1.13 | INTEGER | read-only | Bit mask representing the state of the LEDs on the module.
Each LED is represented by 2 bits. LED #17 state is
indicated by the 2 least significant bits. LED #32 state
is indicated by the 2 most significant bits. How this bit
mask is interpreted depends on the module ID. For example,
some modules use this value to indicate a LED is flashing
(value of '01') or a solid color (value of '00').
This value can be used by a NMS that needs to know this
information for whatever reason. Some modules may not
support this value in which case it should be set to zero. |
| INT wfHwModuleLEDStatus3 | 1.3.6.1.4.1.18.3.1.4.1.1.14 | INTEGER | read-only | Bit mask representing the status of the LEDs on the module.
Each LED is represented by 2 bits. LED #33 status is
indicated by the 2 least significant bits. LED #48 status
is indicated by the 2 most significant bits. How this bit
mask is interpreted depends on the module ID. For example,
some modules use this value to report what color the LED
is currently set to ('00' off, '01' yellow, '10' green).
This value can be used by a NMS that needs to know this
information for whatever reason. Some modules may not
support this value in which case it should be set to zero. |
| INT wfHwModuleLEDState3 | 1.3.6.1.4.1.18.3.1.4.1.1.15 | INTEGER | read-only | Bit mask representing the state of the LEDs on the module.
Each LED is represented by 2 bits. LED #33 state is
indicated by the 2 least significant bits. LED #48 state
is indicated by the 2 most significant bits. How this bit
mask is interpreted depends on the module ID. For example,
some modules use this value to indicate a LED is flashing
(value of '01') or a solid color (value of '00').
This value can be used by a NMS that needs to know this
information for whatever reason. Some modules may not
support this value in which case it should be set to zero. |
| wfModuleTable | 1.3.6.1.4.1.18.3.1.4.2 | | not-accessible | This table is used by the module driver for Barracuda |
| wfModuleEntry | 1.3.6.1.4.1.18.3.1.4.2.1 | | not-accessible | Hardware specific information about a slot. |
| INT wfModuleDelete | 1.3.6.1.4.1.18.3.1.4.2.1.1 | INTEGER | read-write | create/delete parameter |
| INT wfModuleSlot | 1.3.6.1.4.1.18.3.1.4.2.1.2 | INTEGER | read-only | A unique value for each slot.
Its value ranges between 1 and 14.
There are products in this family that contain 1, 5, and 14 slots. |
| INT wfModuleTimerFrequency | 1.3.6.1.4.1.18.3.1.4.2.1.3 | INTEGER | read-write | This value determines the frequency for the buffer balance
algorithm to run |
| INT wfModuleBufferBalance | 1.3.6.1.4.1.18.3.1.4.2.1.4 | INTEGER | read-write | Enable/Disable buffer balancing algorithm selectively |
| INT wfModuleFddiWeight | 1.3.6.1.4.1.18.3.1.4.2.1.5 | INTEGER | read-write | This value determines the weight of the fddi line
for the buffer balancing algorithm |
| INT wfModuleTokenRingWeight | 1.3.6.1.4.1.18.3.1.4.2.1.6 | INTEGER | read-write | This value determines the weight of the token-ring
for the buffer balancing algorithm |
| INT wfModuleCsmacdWeight | 1.3.6.1.4.1.18.3.1.4.2.1.7 | INTEGER | read-write | This value determines the weight of the csmacd line
for the buffer balancing algorithm |
| INT wfModuleSyncWeight | 1.3.6.1.4.1.18.3.1.4.2.1.8 | INTEGER | read-write | This value determines the weight of the sync line
for the buffer balancing algorithm |
| INT wfModuleFreeBufferCredits | 1.3.6.1.4.1.18.3.1.4.2.1.9 | INTEGER | read-only | This attribute indicates the number of buffers
available to line drivers but not used by them |
| INT wfModuleTotalBufferCredits | 1.3.6.1.4.1.18.3.1.4.2.1.10 | INTEGER | read-only | This attribute indicates the total number of buffers
available to line drivers |
| INT wfModuleRestart | 1.3.6.1.4.1.18.3.1.4.2.1.11 | INTEGER | read-write | This attribute should be touched after the queue
lengths are configured in the line-records |
| INT wfModuleCsmacd100Weight | 1.3.6.1.4.1.18.3.1.4.2.1.12 | INTEGER | read-write | This value determines the weight of the csmacd 100MB line
for the buffer balancing algorithm |
| INT wfModuleBisyncWeight | 1.3.6.1.4.1.18.3.1.4.2.1.13 | INTEGER | read-write | This value determines the weight of the bisync line
for the buffer balancing algorithm |
| INT wfModuleHssiWeight | 1.3.6.1.4.1.18.3.1.4.2.1.14 | INTEGER | read-write | This value determines the weight of the hssi line
for the buffer balancing algorithm |
