WWW-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WWW-MIB

Organization: IETF Application MIB Working Group

Last Updated: 1999-02-25

Category: Web and Application Servers

Description: Manages World Wide Web services (HTTP and FTP servers/proxies), providing service information, protocol statistics, and document access counters.

IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring WWW-MIB with a free 30-day trial of IPNetwork Monitor.

What Is WWW-MIB?

WWW-MIB is a vendor-neutral, IETF standards-based MIB module used to monitor 'Document Transfer Protocol' services such as HTTP and FTP servers and proxies. It exposes a service table describing each configured web/FTP service instance -- its protocol, name, type, description, and administrative contact -- along with operational status and summary statistics objects. It is used to monitor the software-service status of a device running such services: whether the service is up (wwwServiceOperStatus), when it was started (wwwServiceStartTime), and when its configuration last changed (wwwServiceLastChange), essentially tracking service availability rather than hardware sensors. It has no significant dependency on other MIBs beyond standard SNMPv2-SMI/SNMPv2-CONF conventions, though it is conceptually related to other IETF application-layer service MIBs. It is typically deployed on any general-purpose server or network appliance running HTTP or FTP services that an operator wants visible to a standards-based SNMP management system. Engineers implementing or auditing this functionality typically reference the WWW-MIB RFC/standard documentation for the authoritative specification.

IPNetwork Monitor allows you to monitor SNMP objects defined in WWW-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • vendor-neutral, standards-based MIB, not tied to a specific manufacturer
  • any server or network appliance running HTTP/FTP services

Monitoring Examples

An administrator would poll wwwServiceTable/wwwServiceEntry, keyed by wwwServiceIndex, to see each configured HTTP or FTP service's wwwServiceProtocol, wwwServiceName, and wwwServiceOperStatus. If wwwServiceOperStatus for a given entry unexpectedly shows 'down' while wwwServiceLastChange shows a recent timestamp, that indicates the web/FTP service just failed or was reconfigured, prompting investigation. The wwwSummaryTable would additionally be checked for aggregate protocol statistics across all configured services on the device.

What Can Be Monitored

  • web/FTP service operational status
  • service start time
  • service configuration last-change time
  • service protocol/type/name
  • aggregate service summary statistics
Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32
mib-2

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION
TimeInterval

From SYSAPPL-MIB

Utf8String

How to Use in IPNetwork Monitor

Example using wwwSummaryInRequests OID:

Select a device implementing WWW-MIB as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type wwwSummaryInRequests into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of requests successfully received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Monitors WWW services and document transfer protocol (DTP) statistics including HTTP and FTP operations.

Start monitoring vendor-neutral, standards-based MIB, any server or network appliance running HTTP/FTP services (service oper-status/start-time status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WWW-MIB