WWP-LEOS-OAM-MIB :: wwpLeosOamUnsupportedCodesTx

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsWWP-LEOS-OAM-MIBwwpLeosOamUnsupportedCodesTx

wwpLeosOamUnsupportedCodesTx

Module: WWP-LEOS-OAM-MIB

OID (symbolic): WWP-LEOS-OAM-MIB::wwpLeosOamUnsupportedCodesTx

OID (numeric): 1.3.6.1.4.1.6141.2.60.400.1.2.4.1.13

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code.

An unsupported op-code OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the op-code for a function that is not supported by the device.

Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.

What is wwpLeosOamUnsupportedCodesTx?

This read-only counter tracks OAMPDUs transmitted on this port carrying an op-code that isn't supported by this device. A nonzero count here likely indicates a software issue generating malformed or unrecognized OAMPDUs, and is worth reporting to support.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.400.1.2.4.1.13
snmpwalk -v2c -c public <target> WWP-LEOS-OAM-MIB::wwpLeosOamUnsupportedCodesTx

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.400.1.2.4.1.13.1
snmpget -v2c -c public <target> WWP-LEOS-OAM-MIB::wwpLeosOamUnsupportedCodesTx.1

Start monitoring Ciena/World Wide Packets Metro Ethernet switch, Ethernet access/first-mile demarcation device (802.3ah OAM peer-discovery/remote-fault status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-OAM-MIB::wwpLeosOamUnsupportedCodesTx OID value, configure state conditions and alerts, and monitor any Ciena/World Wide Packets Metro Ethernet switch, Ethernet access/first-mile demarcation device (802.3ah OAM peer-discovery/remote-fault status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
1.3.6.1.4.1.6141.2.60wwpModulesLeosWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.60.400wwpLeosOamMibModuleWWP-LEOS-OAM-MIB
1.3.6.1.4.1.6141.2.60.400.1wwpLeosOamMIBWWP-LEOS-OAM-MIB
1.3.6.1.4.1.6141.2.60.400.1.2wwpLeosOamObjsWWP-LEOS-OAM-MIB
1.3.6.1.4.1.6141.2.60.400.1.2.4wwpLeosOamStatsTableWWP-LEOS-OAM-MIB
1.3.6.1.4.1.6141.2.60.400.1.2.4.1wwpLeosOamStatsEntryWWP-LEOS-OAM-MIB
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.13wwpLeosOamUnsupportedCodesTxWWP-LEOS-OAM-MIB