All MIBs › WWP-LEOS-OAM-MIB › wwpLeosOamPeerFunctionsSupported
wwpLeosOamPeerFunctionsSupported
Module: WWP-LEOS-OAM-MIB
OID (symbolic): WWP-LEOS-OAM-MIB::wwpLeosOamPeerFunctionsSupported
OID (numeric): 1.3.6.1.4.1.6141.2.60.400.1.2.2.1.8
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: The OAM functions supported on this Ethernet like interface. OAM consists of separate functionality sets above the basic discovery process. This value indicates the capabilities of the peer OAM entity with respect to these functions. This value is initialized so all bits are clear, and is invalid if the wwpLeosOamPeerStatus is inactive.
The capbilities of the OAM peer can be determined from the configuration field of the Local Information TLV of the most recently received Information OAMPDU with a Local Information TLV.
An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) a OAM code that equals the code reserved for Information OAMPDUs.
What is wwpLeosOamPeerFunctionsSupported?
This read-only bitmap reports which optional OAM function sets (unidirectional, loopback, event, variable) the peer entity supports, learned from its Local Information TLV and initialized with all bits clear until a peer is discovered. An admin checks this before attempting to put the peer into remote loopback, to confirm the peer actually supports that capability.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.400.1.2.2.1.8 snmpwalk -v2c -c public <target> WWP-LEOS-OAM-MIB::wwpLeosOamPeerFunctionsSupported
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.400.1.2.2.1.8.1 snmpget -v2c -c public <target> WWP-LEOS-OAM-MIB::wwpLeosOamPeerFunctionsSupported.1
Start monitoring Ciena/World Wide Packets Metro Ethernet switch, Ethernet access/first-mile demarcation device (802.3ah OAM peer-discovery/remote-fault status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-OAM-MIB::wwpLeosOamPeerFunctionsSupported OID value, configure state conditions and alerts, and monitor any Ciena/World Wide Packets Metro Ethernet switch, Ethernet access/first-mile demarcation device (802.3ah OAM peer-discovery/remote-fault status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| 1.3.6.1.4.1.6141.2.60 | wwpModulesLeos | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.60.400 | wwpLeosOamMibModule | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1 | wwpLeosOamMIB | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1.2 | wwpLeosOamObjs | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1.2.2 | wwpLeosOamPeerTable | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1.2.2.1 | wwpLeosOamPeerEntry | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1.2.2.1.8 | wwpLeosOamPeerFunctionsSupported | WWP-LEOS-OAM-MIB |