All MIBs › WWP-LEOS-OAM-MIB › wwpLeosOamLoopbackControlTx
wwpLeosOamLoopbackControlTx
Module: WWP-LEOS-OAM-MIB
OID (symbolic): WWP-LEOS-OAM-MIB::wwpLeosOamLoopbackControlTx
OID (numeric): 1.3.6.1.4.1.6141.2.60.400.1.2.4.1.5
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: A count of the number of Loopback Control OAMPDUs transmitted on this interface.
An Loopback Control OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Loopback Control code.
Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
What is wwpLeosOamLoopbackControlTx?
This read-only counter tracks the number of Loopback Control OAMPDUs transmitted on this port, i.e. the commands sent to start or stop putting the peer into loopback. Admins can check this to confirm a wwpLeosOamLoopbackCommand write actually generated an outbound control PDU.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.400.1.2.4.1.5 snmpwalk -v2c -c public <target> WWP-LEOS-OAM-MIB::wwpLeosOamLoopbackControlTx
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.400.1.2.4.1.5.1 snmpget -v2c -c public <target> WWP-LEOS-OAM-MIB::wwpLeosOamLoopbackControlTx.1
Start monitoring Ciena/World Wide Packets Metro Ethernet switch, Ethernet access/first-mile demarcation device (802.3ah OAM peer-discovery/remote-fault status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-OAM-MIB::wwpLeosOamLoopbackControlTx OID value, configure state conditions and alerts, and monitor any Ciena/World Wide Packets Metro Ethernet switch, Ethernet access/first-mile demarcation device (802.3ah OAM peer-discovery/remote-fault status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| 1.3.6.1.4.1.6141.2.60 | wwpModulesLeos | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.60.400 | wwpLeosOamMibModule | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1 | wwpLeosOamMIB | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1.2 | wwpLeosOamObjs | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1.2.4 | wwpLeosOamStatsTable | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1.2.4.1 | wwpLeosOamStatsEntry | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1.2.4.1.5 | wwpLeosOamLoopbackControlTx | WWP-LEOS-OAM-MIB |