All MIBs › WWP-LEOS-OAM-MIB › wwpLeosOamCriticalEventEnable
wwpLeosOamCriticalEventEnable
Module: WWP-LEOS-OAM-MIB
OID (symbolic): WWP-LEOS-OAM-MIB::wwpLeosOamCriticalEventEnable
OID (numeric): 1.3.6.1.4.1.6141.2.60.400.1.2.6.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates whether the local device should attempt to indicate a critical event has occurred via the OAMPDU flags field to its peer OAM entity. If the system does not support dying gasp capability, setting this object has no effect, and reading the object should always result in 'disabled(2)'.
By default, this object should have the value enabled(1) for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the OamFunctionsSupported attribute), this value is ignored.
What is wwpLeosOamCriticalEventEnable?
This enables(1) or disables(2) whether this device signals a critical-event indication to its OAM peer via the OAMPDU flags field; if the hardware doesn't support this capability, reads always return disabled(2). Like dying gasp, it defaults to enabled(1) so critical local faults are proactively communicated to the peer rather than requiring separate polling.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.400.1.2.6.1.12 snmpwalk -v2c -c public <target> WWP-LEOS-OAM-MIB::wwpLeosOamCriticalEventEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.400.1.2.6.1.12.1 snmpget -v2c -c public <target> WWP-LEOS-OAM-MIB::wwpLeosOamCriticalEventEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.400.1.2.6.1.12.1 i <value>
Start monitoring Ciena/World Wide Packets Metro Ethernet switch, Ethernet access/first-mile demarcation device (802.3ah OAM peer-discovery/remote-fault status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-OAM-MIB::wwpLeosOamCriticalEventEnable OID value, configure state conditions and alerts, and monitor any Ciena/World Wide Packets Metro Ethernet switch, Ethernet access/first-mile demarcation device (802.3ah OAM peer-discovery/remote-fault status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| 1.3.6.1.4.1.6141.2.60 | wwpModulesLeos | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.60.400 | wwpLeosOamMibModule | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1 | wwpLeosOamMIB | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1.2 | wwpLeosOamObjs | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1.2.6 | wwpLeosOamEventConfigTable | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1.2.6.1 | wwpLeosOamEventConfigEntry | WWP-LEOS-OAM-MIB |
| 1.3.6.1.4.1.6141.2.60.400.1.2.6.1.12 | wwpLeosOamCriticalEventEnable | WWP-LEOS-OAM-MIB |