WWP-LEOS-OAM-MIB :: wwpLeosOamAdminState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsWWP-LEOS-OAM-MIBwwpLeosOamAdminState

wwpLeosOamAdminState

Module: WWP-LEOS-OAM-MIB

OID (symbolic): WWP-LEOS-OAM-MIB::wwpLeosOamAdminState

OID (numeric): 1.3.6.1.4.1.6141.2.60.400.1.2.1.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is used to provision the default administrative OAM mode for this interface. This object represents the desired state of OAM for this interface.

The wwpLeosOamAdminState always starts in the disabled(1) state until an explicit management action or configuration information retained by the system causes a transition to the enabled(2) state.

Note that the value of this object is ignored when the interface is not operating in full-duplex mode. OAM is not supported on half-duplex links.

What is wwpLeosOamAdminState?

This enables(2) or disables(1) IEEE 802.3ah Ethernet OAM on this interface, starting disabled by default until explicitly turned on. Note that this setting is ignored on half-duplex links since OAM only works over full-duplex Ethernet.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.400.1.2.1.1.1
snmpwalk -v2c -c public <target> WWP-LEOS-OAM-MIB::wwpLeosOamAdminState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.400.1.2.1.1.1.1
snmpget -v2c -c public <target> WWP-LEOS-OAM-MIB::wwpLeosOamAdminState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.400.1.2.1.1.1.1 i <value>

Start monitoring Ciena/World Wide Packets Metro Ethernet switch, Ethernet access/first-mile demarcation device (802.3ah OAM peer-discovery/remote-fault status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-OAM-MIB::wwpLeosOamAdminState OID value, configure state conditions and alerts, and monitor any Ciena/World Wide Packets Metro Ethernet switch, Ethernet access/first-mile demarcation device (802.3ah OAM peer-discovery/remote-fault status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
1.3.6.1.4.1.6141.2.60wwpModulesLeosWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.60.400wwpLeosOamMibModuleWWP-LEOS-OAM-MIB
1.3.6.1.4.1.6141.2.60.400.1wwpLeosOamMIBWWP-LEOS-OAM-MIB
1.3.6.1.4.1.6141.2.60.400.1.2wwpLeosOamObjsWWP-LEOS-OAM-MIB
1.3.6.1.4.1.6141.2.60.400.1.2.1wwpLeosOamTableWWP-LEOS-OAM-MIB
1.3.6.1.4.1.6141.2.60.400.1.2.1.1wwpLeosOamEntryWWP-LEOS-OAM-MIB
1.3.6.1.4.1.6141.2.60.400.1.2.1.1.1wwpLeosOamAdminStateWWP-LEOS-OAM-MIB