WWP-LEOS-LLDP-MIB :: wwpLeosLldpTxDelay

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › WWP-LEOS-LLDP-MIB › wwpLeosLldpTxDelay

wwpLeosLldpTxDelay

Module: WWP-LEOS-LLDP-MIB

OID (symbolic): WWP-LEOS-LLDP-MIB::wwpLeosLldpTxDelay

OID (numeric): 1.3.6.1.4.1.6141.2.60.26.1.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The wwpLeosLldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB. The recommended value for the wwpLeosLldpTxDelay is set by the following formula:

1 <= wwpLeosLldpTxDelay <= (0.25 * wwpLeosLldpMessageTxInterval)

The default value for wwpLeosLldpTxDelay object is 8 seconds.

If the agent is capable of storing non-volatile configuration, then the value of this object must be restored after a re-initialization of the management system.

What is wwpLeosLldpTxDelay?

Sets the minimum delay, in seconds (1-8192, default 8), between LLDP frame transmissions triggered by local system changes, recommended to stay at or below a quarter of wwpLeosLldpMessageTxInterval; this object is deprecated in favor of a newer equivalent.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.26.1.1.4
snmpwalk -v2c -c public <target> WWP-LEOS-LLDP-MIB::wwpLeosLldpTxDelay

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.26.1.1.4.1
snmpget -v2c -c public <target> WWP-LEOS-LLDP-MIB::wwpLeosLldpTxDelay.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.26.1.1.4.1 i <value>

Start monitoring Ciena LEOS / World Wide Packets Metro Ethernet switch (LLDP per-port enable/remote-neighbor status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-LLDP-MIB::wwpLeosLldpTxDelay OID value, configure state conditions and alerts, and monitor any Ciena LEOS / World Wide Packets Metro Ethernet switch (LLDP per-port enable/remote-neighbor status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
1.3.6.1.4.1.6141.2.60wwpModulesLeosWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.60.26wwpLeosLldpMIBWWP-LEOS-LLDP-MIB
1.3.6.1.4.1.6141.2.60.26.1wwpLeosLldpMIBObjectsWWP-LEOS-LLDP-MIB
1.3.6.1.4.1.6141.2.60.26.1.1wwpLeosLldpConfigurationWWP-LEOS-LLDP-MIB
1.3.6.1.4.1.6141.2.60.26.1.1.4wwpLeosLldpTxDelayWWP-LEOS-LLDP-MIB