All MIBs › WWP-LEOS-LLDP-MIB › wwpLeosLldpPortConfigTLVsTxEnable
wwpLeosLldpPortConfigTLVsTxEnable
Module: WWP-LEOS-LLDP-MIB
OID (symbolic): WWP-LEOS-LLDP-MIB::wwpLeosLldpPortConfigTLVsTxEnable
OID (numeric): 1.3.6.1.4.1.6141.2.60.26.1.1.5.1.3
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: The wwpLeosLldpTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to a TLV type associated with a specific optional TLV. Some of the bits, such as 0 through 3, are not included in the bitmap since they represent mandatory TLVs that all LLDP agents should transmit.
It should be noted that the organizationally defined TLVs are excluded from the wwpLeosLldpTLVsTxEnable bitmap.
LLDP Organization Specific Information Extension MIBs should have similar configuration object to control transmission of their organizationally defined TLVs.
The bit 'portDesc(4)' indicates that LLDP agent should transmit 'Port Description TLV'.
The bit 'sysName(5)' indicates that LLDP agent should transmit 'System Name TLV'.
The bit 'sysDesc(6)' indicates that LLDP agent should transmit 'System Description TLV'.
The bit 'sysCap(7)' indicates that LLDP agent should transmit 'System Capabilities TLV'.
There is no bit reserved for the management address TLV type since transmission of management address TLVs are controlled by another object, wwpLeosLldpConfigManAddrTable.
If the agent is capable of storing non-volatile configuration, then the value of this object must be restored after a re-initialization of the management system.
What is wwpLeosLldpPortConfigTLVsTxEnable?
A bitmask (default includes all four bits) selecting which optional LLDP TLVs -- portDesc, sysName, sysDesc, sysCap -- this port advertises; mandatory TLVs and the separately-controlled management-address TLV aren't part of this bitmap, and the object itself is deprecated in favor of a newer equivalent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.26.1.1.5.1.3 snmpwalk -v2c -c public <target> WWP-LEOS-LLDP-MIB::wwpLeosLldpPortConfigTLVsTxEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.26.1.1.5.1.3.1 snmpget -v2c -c public <target> WWP-LEOS-LLDP-MIB::wwpLeosLldpPortConfigTLVsTxEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.26.1.1.5.1.3.1 s <value>
Start monitoring Ciena LEOS / World Wide Packets Metro Ethernet switch (LLDP per-port enable/remote-neighbor status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-LLDP-MIB::wwpLeosLldpPortConfigTLVsTxEnable OID value, configure state conditions and alerts, and monitor any Ciena LEOS / World Wide Packets Metro Ethernet switch (LLDP per-port enable/remote-neighbor status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| 1.3.6.1.4.1.6141.2.60 | wwpModulesLeos | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.60.26 | wwpLeosLldpMIB | WWP-LEOS-LLDP-MIB |
| 1.3.6.1.4.1.6141.2.60.26.1 | wwpLeosLldpMIBObjects | WWP-LEOS-LLDP-MIB |
| 1.3.6.1.4.1.6141.2.60.26.1.1 | wwpLeosLldpConfiguration | WWP-LEOS-LLDP-MIB |
| 1.3.6.1.4.1.6141.2.60.26.1.1.5 | wwpLeosLldpPortConfigTable | WWP-LEOS-LLDP-MIB |
| 1.3.6.1.4.1.6141.2.60.26.1.1.5.1 | wwpLeosLldpPortConfigEntry | WWP-LEOS-LLDP-MIB |
| 1.3.6.1.4.1.6141.2.60.26.1.1.5.1.3 | wwpLeosLldpPortConfigTLVsTxEnable | WWP-LEOS-LLDP-MIB |