WWP-LEOS-LLDP-MIB :: wwpLeosLldpPortConfigAdminStatus

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › WWP-LEOS-LLDP-MIB › wwpLeosLldpPortConfigAdminStatus

wwpLeosLldpPortConfigAdminStatus

Module: WWP-LEOS-LLDP-MIB

OID (symbolic): WWP-LEOS-LLDP-MIB::wwpLeosLldpPortConfigAdminStatus

OID (numeric): 1.3.6.1.4.1.6141.2.60.26.1.1.5.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The administratively desired status of the local LLDP agent.

If the associated wwpLeosLldpPortConfigAdminStatus object has a value of 'txOnly(1)', then this port will transmit LLDP frames only and it will not store any information about the remote systems connected.

If the associated wwpLeosLldpPortConfigAdminStatus object has a value of 'rxOnly(2)', then this port will receive LLDP frames only.

If the associated wwpLeosLldpPortConfigAdminStatus object has a value of 'txAndRx(3)', then this port will transmit and receive LLDP frames.

If the associated wwpLeosLldpPortConfigAdminStatus object has a value of 'disabled(4)', then this port will not transmit or receive LLDP frames.

What is wwpLeosLldpPortConfigAdminStatus?

Controls how LLDP behaves on this port: txOnly(1) only advertises, rxOnly(2) only listens, txAndRx(3) (the default) does both, and disabled(4) turns LLDP off entirely on the port; this object is deprecated in favor of a newer equivalent.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.26.1.1.5.1.2
snmpwalk -v2c -c public <target> WWP-LEOS-LLDP-MIB::wwpLeosLldpPortConfigAdminStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.26.1.1.5.1.2.1
snmpget -v2c -c public <target> WWP-LEOS-LLDP-MIB::wwpLeosLldpPortConfigAdminStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.26.1.1.5.1.2.1 i <value>

Start monitoring Ciena LEOS / World Wide Packets Metro Ethernet switch (LLDP per-port enable/remote-neighbor status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-LLDP-MIB::wwpLeosLldpPortConfigAdminStatus OID value, configure state conditions and alerts, and monitor any Ciena LEOS / World Wide Packets Metro Ethernet switch (LLDP per-port enable/remote-neighbor status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
1.3.6.1.4.1.6141.2.60wwpModulesLeosWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.60.26wwpLeosLldpMIBWWP-LEOS-LLDP-MIB
1.3.6.1.4.1.6141.2.60.26.1wwpLeosLldpMIBObjectsWWP-LEOS-LLDP-MIB
1.3.6.1.4.1.6141.2.60.26.1.1wwpLeosLldpConfigurationWWP-LEOS-LLDP-MIB
1.3.6.1.4.1.6141.2.60.26.1.1.5wwpLeosLldpPortConfigTableWWP-LEOS-LLDP-MIB
1.3.6.1.4.1.6141.2.60.26.1.1.5.1wwpLeosLldpPortConfigEntryWWP-LEOS-LLDP-MIB
1.3.6.1.4.1.6141.2.60.26.1.1.5.1.2wwpLeosLldpPortConfigAdminStatusWWP-LEOS-LLDP-MIB