WS-SW-IF-MIB :: wsIfDuplex

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WS-SW-IF-MIB › wsIfDuplex

wsIfDuplex

Module: WS-SW-IF-MIB

OID (symbolic): WS-SW-IF-MIB::wsIfDuplex

OID (numeric): 1.3.6.1.4.1.388.14.2.4.1.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: ws IF duplex

What is wsIfDuplex?

The interface's current negotiated duplex mode - unknown, half, or full - which an admin checks alongside wsIfSpeed when diagnosing a port showing excessive collisions or poor throughput, a classic symptom of a duplex mismatch.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.388.14.2.4.1.1.1.6
snmpwalk -v2c -c public <target> WS-SW-IF-MIB::wsIfDuplex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.388.14.2.4.1.1.1.6.1
snmpget -v2c -c public <target> WS-SW-IF-MIB::wsIfDuplex.1

Start monitoring Symbol Technologies wireless switch controllers (per-interface speed/duplex/utilization and traffic-counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WS-SW-IF-MIB::wsIfDuplex OID value, configure state conditions and alerts, and monitor any Symbol Technologies wireless switch controllers (per-interface speed/duplex/utilization and traffic-counter status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.388symbolSYMBOL-DSSS-ENTERPRISE-PRIVATE-MIB
1.3.6.1.4.1.388.14wsWS-SMI
1.3.6.1.4.1.388.14.2wsSwWS-SMI
1.3.6.1.4.1.388.14.2.4wsSwIfWS-SW-SMI
Numeric OIDNameModule
1.3.6.1.4.1.388.14.2.4.1wsIfModuleWS-SW-IF-MIB
1.3.6.1.4.1.388.14.2.4.1.1wsIfTableWS-SW-IF-MIB
1.3.6.1.4.1.388.14.2.4.1.1.1wsIfEntryWS-SW-IF-MIB
1.3.6.1.4.1.388.14.2.4.1.1.1.6wsIfDuplexWS-SW-IF-MIB