-- -- WS-SW-IF-MIB.my -- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 -- Thursday, November 12, 2009 at 13:48:25 -- WS-SW-IF-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Integer32, Unsigned32, Counter64, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI TruthValue, DisplayString, PhysAddress, RowStatus FROM SNMPv2-TC wsSwIf FROM WS-SW-SMI; -- 1.3.6.1.4.1.388.14.2.4.1 wsIfModule MODULE-IDENTITY LAST-UPDATED "200906021824Z" -- June 02, 2009 at 18:24 GMT ORGANIZATION "Symbol Technologies" CONTACT-INFO "Symbol Technologies, Inc. Customer Service Postal: One Symbol Plaza Holtsville, NY 11742-1300 USA Tel: +1. 631.738.6213 E-mail: support@symbol.com Web: http://www.symbol.com/support" DESCRIPTION "WS IF Module" REVISION "200911111459Z" -- November 11, 2009 at 14:59 GMT DESCRIPTION "Added wsIfUpDownTimes." REVISION "200906021824Z" -- June 02, 2009 at 18:24 GMT DESCRIPTION "02a27 Updated the description of wsIfWirelessWanPassword." REVISION "200905211245Z" -- May 21, 2009 at 12:45 GMT DESCRIPTION "02a26 Added objects wsIfWirelessWanDhcpPrimaryDnsServer and wsIfWirelessWanDhcpSecondaryDnsServer." REVISION "200904231202Z" -- April 23, 2009 at 12:02 GMT DESCRIPTION "02a25 Added the object wsIfLayer2Count." REVISION "200904101457Z" -- April 10, 2009 at 14:57 GMT DESCRIPTION "02a24 Added wsIfHWType ppp for Wireless WAN feature" REVISION "200904021307Z" -- April 02, 2009 at 13:07 GMT DESCRIPTION "02a23 Corrected the size of wsIfWirelessWanApName, wsIfWirelessWanUsername, and wsIfWirelessWanPassword." REVISION "200903311511Z" -- March 31, 2009 at 15:11 GMT DESCRIPTION "02a22 Added OID wsIfWirelessWan and subobjects." REVISION "200811211441Z" -- November 21, 2008 at 14:41 GMT DESCRIPTION "02a21 Added wsIfThroughput." REVISION "200811101426Z" -- November 10, 2008 at 14:26 GMT DESCRIPTION "02a20 Added wsIfTotalMBytes." REVISION "200810231400Z" -- October 23, 2008 at 14:00 GMT DESCRIPTION "02a19 Added bandwidth utilization and 64-bit counters in wsIfTable." REVISION "200706281522Z" -- June 28, 2007 at 15:22 GMT DESCRIPTION "02a18" REVISION "200701041810Z" -- January 04, 2007 at 18:10 GMT DESCRIPTION "02a17" REVISION "200612121754Z" -- December 12, 2006 at 17:54 GMT DESCRIPTION "02a16" REVISION "200611061106Z" -- November 06, 2006 at 11:06 GMT DESCRIPTION "02a15" REVISION "200611031358Z" -- November 03, 2006 at 13:58 GMT DESCRIPTION "02a14" REVISION "200611011005Z" -- November 01, 2006 at 10:05 GMT DESCRIPTION "02a13" REVISION "200610311213Z" -- October 31, 2006 at 12:13 GMT DESCRIPTION "02a12" REVISION "200610311118Z" -- October 31, 2006 at 11:18 GMT DESCRIPTION "02a11" REVISION "200610301708Z" -- October 30, 2006 at 17:08 GMT DESCRIPTION "02a10" REVISION "200610301103Z" -- October 30, 2006 at 11:03 GMT DESCRIPTION "02a09" REVISION "200610271237Z" -- October 27, 2006 at 12:37 GMT DESCRIPTION "02a08" REVISION "200610261018Z" -- October 26, 2006 at 10:18 GMT DESCRIPTION "02a07" REVISION "200610251558Z" -- October 25, 2006 at 15:58 GMT DESCRIPTION "02a06" REVISION "200610251101Z" -- October 25, 2006 at 11:01 GMT DESCRIPTION "02a05" REVISION "200610201759Z" -- October 20, 2006 at 17:59 GMT DESCRIPTION "02a04" REVISION "200605241656Z" -- May 24, 2006 at 16:56 GMT DESCRIPTION "02a03" REVISION "200604271521Z" -- April 27, 2006 at 15:21 GMT DESCRIPTION "02a02" REVISION "200604171412Z" -- April 17, 2006 at 14:12 GMT DESCRIPTION "02a01" REVISION "200603211309Z" -- March 21, 2006 at 13:09 GMT DESCRIPTION "01a12" REVISION "200603021122Z" -- March 02, 2006 at 11:22 GMT DESCRIPTION "01a11" REVISION "200508031128Z" -- August 03, 2005 at 11:28 GMT DESCRIPTION "01a10" REVISION "200506141810Z" -- June 14, 2005 at 18:10 GMT DESCRIPTION "01a09" REVISION "200506141707Z" -- June 14, 2005 at 17:07 GMT DESCRIPTION "01a08" REVISION "200506141635Z" -- June 14, 2005 at 16:35 GMT DESCRIPTION "01a07" REVISION "200506021110Z" -- June 02, 2005 at 11:10 GMT DESCRIPTION "01a06" REVISION "200506011025Z" -- June 01, 2005 at 10:25 GMT DESCRIPTION "01a05" REVISION "200505311716Z" -- May 31, 2005 at 17:16 GMT DESCRIPTION "01a04,rename the mib" REVISION "200505241734Z" -- May 24, 2005 at 17:34 GMT DESCRIPTION "01a03" REVISION "200505241336Z" -- May 24, 2005 at 13:36 GMT DESCRIPTION "01a02" REVISION "200505121342Z" -- May 12, 2005 at 13:42 GMT DESCRIPTION "01a01" ::= { wsSwIf 1 } -- -- -- Node definitions -- -- 1.3.6.1.4.1.388.14.2.4.1.1 wsIfTable OBJECT-TYPE SYNTAX SEQUENCE OF WsIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ws IF table" ::= { wsIfModule 1 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1 wsIfEntry OBJECT-TYPE SYNTAX WsIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ws IF table entry" INDEX { wsIfHWType, wsIfNumber } ::= { wsIfTable 1 } WsIfEntry ::= SEQUENCE { wsIfHWType INTEGER, wsIfNumber INTEGER, wsIfMTU Integer32, wsIfSpeed INTEGER, wsIfAdminSpeed INTEGER, wsIfDuplex INTEGER, wsIfAdminDuplex INTEGER, wsIfDHCPEnable TruthValue, wsIfIndex Integer32, wsIfType INTEGER, wsIfName DisplayString, wsIfRowStatus RowStatus, wsIfDescr DisplayString, wsIfMaxSpeed INTEGER, wsIfMgmtAllowed TruthValue, wsIfMedType INTEGER, wsIfMedTypeSupported INTEGER, wsIfVlanMappingAllowed TruthValue, wsIfStaticLinkAggMembershipAllowed TruthValue, wsIfStaticLinkAgg INTEGER, wsIfSpeedUtilization Integer32, wsIfInOctets Counter64, wsIfInPkts Counter64, wsIfOutOctets Counter64, wsIfOutPkts Counter64, wsIfTotalMBytes Counter64, wsIfThroughput Unsigned32, wsIfUpDownTimes Unsigned32 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.1 wsIfHWType OBJECT-TYPE SYNTAX INTEGER { eth(1), loopBack(2), vlan(3), gre(4), mlt(5), ppp(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "ws IF hardware type" ::= { wsIfEntry 1 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.2 wsIfNumber OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "ws IF number" ::= { wsIfEntry 2 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.3 wsIfMTU OBJECT-TYPE SYNTAX Integer32 (64..2000) MAX-ACCESS read-create STATUS current DESCRIPTION "ws IF MTU, read/write" ::= { wsIfEntry 3 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.4 wsIfSpeed OBJECT-TYPE SYNTAX INTEGER { unknown(0), tenMbps(1), hundredMbps(2), thousandMbps(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "ws IF speed" ::= { wsIfEntry 4 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.5 wsIfAdminSpeed OBJECT-TYPE SYNTAX INTEGER { tenMbps(1), hundredMbps(2), thousandMbps(3), auto(4), tenGbps(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "ws IF speed, read/write, not applicable in vlan" DEFVAL { auto } ::= { wsIfEntry 5 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.6 wsIfDuplex OBJECT-TYPE SYNTAX INTEGER { unknown(0), halfDuplex(1), fullDuplex(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ws IF duplex" ::= { wsIfEntry 6 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.7 wsIfAdminDuplex OBJECT-TYPE SYNTAX INTEGER { halfDuplex(1), fullDuplex(2), auto(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "ws IF duplex, read/write, not applicable in vlan" ::= { wsIfEntry 7 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.8 wsIfDHCPEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "ws IF DHCP enable, read/write" ::= { wsIfEntry 8 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.9 wsIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "if Index number" ::= { wsIfEntry 9 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.10 wsIfType OBJECT-TYPE SYNTAX INTEGER { layer2(1), layer3(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ws if type, specify it is layer 2 or layer 3 interface" ::= { wsIfEntry 10 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.11 wsIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ws if name, a display string" ::= { wsIfEntry 11 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.12 wsIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "row status, only createAndGo, destroy, active are supported, and only create a vlan is supported" ::= { wsIfEntry 12 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.13 wsIfDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Description." ::= { wsIfEntry 13 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.14 wsIfMaxSpeed OBJECT-TYPE SYNTAX INTEGER { unknown(0), tenMBps(1), hundredMBps(2), thousandMBps(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { wsIfEntry 14 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.15 wsIfMgmtAllowed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "indicates if this interface is available for mgmt port" ::= { wsIfEntry 15 } -- may become read-write in future platforms -- 1.3.6.1.4.1.388.14.2.4.1.1.1.16 wsIfMedType OBJECT-TYPE SYNTAX INTEGER { fiber(1), copper(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "the current port medium type " ::= { wsIfEntry 16 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.17 wsIfMedTypeSupported OBJECT-TYPE SYNTAX INTEGER { fiber(1), copper(2), both(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "the possilbe option for the current port med type supported" ::= { wsIfEntry 17 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.18 wsIfVlanMappingAllowed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "indicate if vlan mapping is allowed on this port" ::= { wsIfEntry 18 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.19 wsIfStaticLinkAggMembershipAllowed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This field indicates if this port can become a member of a static link aggregate." ::= { wsIfEntry 19 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.20 wsIfStaticLinkAgg OBJECT-TYPE SYNTAX INTEGER (0..4) MAX-ACCESS read-create STATUS current DESCRIPTION "If non-zero, indicates the static link aggregate this port is a member of." ::= { wsIfEntry 20 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.21 wsIfSpeedUtilization OBJECT-TYPE SYNTAX Integer32 (0..10000) UNITS "0.01%" MAX-ACCESS read-only STATUS current DESCRIPTION "The best estimate of the interface's current bandwidth utilization, in hundredths of a percent." ::= { wsIfEntry 21 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.22 wsIfInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters." ::= { wsIfEntry 22 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.23 wsIfInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets delivered to a higher-layer protocol." ::= { wsIfEntry 23 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.24 wsIfOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters." ::= { wsIfEntry 24 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.25 wsIfOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted including those that were discarded or not sent." ::= { wsIfEntry 25 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.26 wsIfTotalMBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total megabytes received and transmitted on the interface." ::= { wsIfEntry 26 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.27 wsIfThroughput OBJECT-TYPE SYNTAX Unsigned32 UNITS "Kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "The throughput of the interface." ::= { wsIfEntry 27 } -- 1.3.6.1.4.1.388.14.2.4.1.1.1.28 wsIfUpDownTimes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Updown counter." ::= { wsIfEntry 28 } -- 1.3.6.1.4.1.388.14.2.4.1.2 wsIfMgmtIfname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "mgmt interface name of this platform" ::= { wsIfModule 2 } -- 1.3.6.1.4.1.388.14.2.4.1.3 wsIfRonIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Ron interface name of this platform." ::= { wsIfModule 3 } -- 1.3.6.1.4.1.388.14.2.4.1.4 wsIfWlanIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "only applied in whistler" ::= { wsIfModule 4 } -- 1.3.6.1.4.1.388.14.2.4.1.5 wsIfMgmtOptions OBJECT-TYPE SYNTAX INTEGER { vlanOnly(1), phyOnly(2), both(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describe what choice are available in the current platform. For whistler/monarch, it is vlanOnly(1).For quicksilver, it is both(3)" ::= { wsIfModule 5 } -- 1.3.6.1.4.1.388.14.2.4.1.6 wsIfMgmtOptionState OBJECT-TYPE SYNTAX INTEGER { vlanOnly(1), phyOnly(2), both(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Describe what choice are in effect in the current platform. For whistler/monarch/quicksilver, this attribute is read-only, setting it will get a GEN_ERR response. For whislter/monarch, the value is vlanOnly(1). For quicksilver, the value is both(3) " ::= { wsIfModule 6 } -- 1.3.6.1.4.1.388.14.2.4.1.7 wsIfMedDefault OBJECT-TYPE SYNTAX INTEGER { fiber(1), copper(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The default medium for the port. Only writable in quick silver. In whislter/monarch, write it will return a GEN_ERR." ::= { wsIfModule 7 } -- 1.3.6.1.4.1.388.14.2.4.1.8 wsIfMedDefaultSupported OBJECT-TYPE SYNTAX INTEGER { fiber(1), copper(2), both(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "the possible option for default med type supported" ::= { wsIfModule 8 } -- 1.3.6.1.4.1.388.14.2.4.1.9 wsIfMaxStaticLinkAgg OBJECT-TYPE SYNTAX INTEGER (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of static link aggregates supported." ::= { wsIfModule 9 } -- 1.3.6.1.4.1.388.14.2.4.1.10 wsIfManagementSecure OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is set to true, the management traffic is allowed only through the management port on the switch. When this object is set to false, the management traffic is allowed through any port on the switch. " ::= { wsIfModule 10 } -- 1.3.6.1.4.1.388.14.2.4.1.11 wsIfSwitchMacAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the interface representative of this wireless switch." ::= { wsIfModule 11 } -- Wireless WAN interface configuration and status. -- Some wireless switch models do not support Wireless WAN interface. -- 1.3.6.1.4.1.388.14.2.4.1.12 wsIfWirelessWan OBJECT IDENTIFIER ::= { wsIfModule 12 } -- 1.3.6.1.4.1.388.14.2.4.1.12.1 wsIfWirelessWanApName OBJECT-TYPE SYNTAX DisplayString (SIZE (0 | 1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Access Point name provided by the Wireless WAN service provider. A value of zero-length string for this object indicates that the Access Point name is not configured." ::= { wsIfWirelessWan 1 } -- 1.3.6.1.4.1.388.14.2.4.1.12.2 wsIfWirelessWanUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (0 | 1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Username provided by the Wireless WAN service provider. A value of zero-length string for this object indicates that the username is not configured." ::= { wsIfWirelessWan 2 } -- 1.3.6.1.4.1.388.14.2.4.1.12.3 wsIfWirelessWanPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0 | 1..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password provided by the Wireless WAN service provider. This object is logically write-only. Reading this object will return *s when password is configured and a zero-length string when password is not configured. Writing zero-length string in this object indicates that the password is not configured." ::= { wsIfWirelessWan 3 } -- 1.3.6.1.4.1.388.14.2.4.1.12.4 wsIfWirelessWanAuthType OBJECT-TYPE SYNTAX INTEGER { none(1), pap(2), chap(3), msChap(4), msChapV2(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication type used by the switch. none : Not configured pap : PAP chap : CHAP msChap : MS-CHAP msChapV2 : MS-CHAPv2" ::= { wsIfWirelessWan 4 } -- 1.3.6.1.4.1.388.14.2.4.1.12.5 wsIfWirelessWanEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Wireless WAN interface. The Wireless WAN configuration objects must have acceptable values to enable the interface." ::= { wsIfWirelessWan 5 } -- 1.3.6.1.4.1.388.14.2.4.1.12.6 wsIfWirelessWanSignalStrength OBJECT-TYPE SYNTAX Integer32 (-200..-1 | 0) MAX-ACCESS read-only STATUS current DESCRIPTION "The Wireless WAN signal strength. 0 : signal strength unavailable -200..-1 : signal strength in dBm" ::= { wsIfWirelessWan 6 } -- 1.3.6.1.4.1.388.14.2.4.1.12.7 wsIfWirelessWanSignalCoverage OBJECT-TYPE SYNTAX INTEGER { excellent(1), good(2), moderate(3), weak(4), noCoverage(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Wireless WAN signal coverage. excellent : Excellent coverage good : Good coverage moderate : Moderate coverage weak : Weak coverage noCoverage : No coverage" ::= { wsIfWirelessWan 7 } -- 1.3.6.1.4.1.388.14.2.4.1.12.8 wsIfWirelessWanDhcpPrimaryDnsServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The primary Wireless WAN DNS server obtained via DHCP." ::= { wsIfWirelessWan 8 } -- 1.3.6.1.4.1.388.14.2.4.1.12.9 wsIfWirelessWanDhcpSecondaryDnsServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The secondary Wireless WAN DNS server obtained via DHCP." ::= { wsIfWirelessWan 9 } -- 1.3.6.1.4.1.388.14.2.4.1.13 wsIfLayer2Count OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of layer-2 network interfaces (regardless of their current state) present on this system." ::= { wsIfModule 13 } -- 1.3.6.1.4.1.388.14.2.4.1.100 wsIfConformance OBJECT IDENTIFIER ::= { wsIfModule 100 } -- 1.3.6.1.4.1.388.14.2.4.1.100.1 wsIfCompliances OBJECT IDENTIFIER ::= { wsIfConformance 1 } -- 1.3.6.1.4.1.388.14.2.4.1.100.1.1 wsIfCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { wsIfGroup } ::= { wsIfCompliances 1 } -- 1.3.6.1.4.1.388.14.2.4.1.100.2 wsIfGroups OBJECT IDENTIFIER ::= { wsIfConformance 2 } -- 1.3.6.1.4.1.388.14.2.4.1.100.2.1 wsIfGroup OBJECT-GROUP OBJECTS { wsIfNumber, wsIfMTU, wsIfSpeed, wsIfAdminSpeed, wsIfDuplex, wsIfAdminDuplex, wsIfDHCPEnable, wsIfRowStatus, wsIfIndex, wsIfName, wsIfMgmtIfname, wsIfRonIfName, wsIfWlanIfName, wsIfDescr, wsIfMaxSpeed, wsIfMgmtAllowed, wsIfVlanMappingAllowed, wsIfMedDefaultSupported, wsIfMedTypeSupported, wsIfType, wsIfHWType, wsIfMedType, wsIfMaxStaticLinkAgg, wsIfStaticLinkAgg, wsIfStaticLinkAggMembershipAllowed, wsIfSwitchMacAddress, wsIfSpeedUtilization, wsIfMedDefault, wsIfMgmtOptions, wsIfMgmtOptionState, wsIfTotalMBytes, wsIfThroughput, wsIfWirelessWanSignalCoverage, wsIfWirelessWanSignalStrength, wsIfWirelessWanEnable, wsIfWirelessWanAuthType, wsIfWirelessWanPassword, wsIfWirelessWanUsername, wsIfWirelessWanApName, wsIfLayer2Count, wsIfWirelessWanDhcpPrimaryDnsServer, wsIfWirelessWanDhcpSecondaryDnsServer, wsIfUpDownTimes, wsIfManagementSecure, wsIfInOctets, wsIfInPkts, wsIfOutOctets, wsIfOutPkts } STATUS current DESCRIPTION "Description." ::= { wsIfGroups 1 } END -- -- WS-SW-IF-MIB.my --