WRI-DEVICE-MIB

All MIBs › WRI-DEVICE-MIB

Category: FiberHome Networks

Description: Defines FiberHome Networks device-level inventory and hardware status objects for network element management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WRI-DEVICE-MIB?

WRI-DEVICE-MIB is a FiberHome Networks module defining device-level inventory and hardware status objects for network element management, complementing the vendor's CPU-specific MIB with broader chassis/hardware information. It exposes hardware inventory data (such as installed modules/boards) and their operational or fault status. This is fundamentally a hardware health MIB: it is used to confirm that expected hardware modules are present and functioning, surfacing hardware faults at the device/module level. No specific dependency on other MIBs is apparent from the available metadata, though it would typically be used alongside WRI-CPU-MIB and other FiberHome performance MIBs. It is deployed on FiberHome transport/access network elements for hardware inventory tracking and fault detection. Engineers can download the WRI-DEVICE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WRI-DEVICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

FiberHome Networks transport/access device

Monitoring Examples

No sample object or table names or module description text were available for this module, so specific identifiers cannot be cited; an administrator would typically poll hardware inventory and status objects to detect a missing or faulted module/board in the chassis. Without a verified object list, further technical detail would be speculative rather than grounded in the MIB.

What Can Be Monitored

hardware/module inventory
module operational status
hardware fault indicators

Imported Objects

From SNMPv2-SMI

Counter32
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

PhysAddress
TEXTUAL-CONVENTION

From WRI-SMI

wriProducts	OBJECT-IDENTITY
wriProtocol	OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF loggingTrap	1.3.6.1.4.1.3807.1.8012.2.1.54.1			Logging trap.
loggingTrapObjects	1.3.6.1.4.1.3807.1.8012.2.1.54
mspp	1.3.6.1.4.1.3807.1.8012
msppChassis	1.3.6.1.4.1.3807.1.8012.1
OCT msppCliVersion	1.3.6.1.4.1.3807.1.8012.2.1.59	OCTET STRING	read-only	Description.
INT msppCmuState	1.3.6.1.4.1.3807.1.8012.2.1.51	INTEGER	read-only	Cmu State.whether cmu is insert
msppDev	1.3.6.1.4.1.3807.1.8012.2
INT msppDevBootCfg	1.3.6.1.4.1.3807.1.8012.2.1.45	INTEGER	read-write	Boot configuration.
INT msppDevBootOs	1.3.6.1.4.1.3807.1.8012.2.1.44	INTEGER	read-write	Boot os imgage.
C32 msppDevCardBits	1.3.6.1.4.1.3807.1.8012.2.1.5	Counter32	read-only	Node card bitmap.
INT msppDevCardNum	1.3.6.1.4.1.3807.1.8012.2.1.6	INTEGER	read-only	Node index.
INT msppDevCfgAction	1.3.6.1.4.1.3807.1.8012.2.1.13	INTEGER	read-write
STR msppDevCfgFile	1.3.6.1.4.1.3807.1.8012.2.1.12	DisplayString	read-write
STR msppDevCode	1.3.6.1.4.1.3807.1.8012.2.1.50	DisplayString	read-only	Device code.
STR msppDevDescr	1.3.6.1.4.1.3807.1.8012.2.1.2	DisplayString	read-write	Node desription.
C32 msppDevErrorBits	1.3.6.1.4.1.3807.1.8012.2.1.17	Counter32	read-only	counter value.
INT msppDevFileAction	1.3.6.1.4.1.3807.1.8012.2.1.56	INTEGER	read-write
STR msppDevFileName	1.3.6.1.4.1.3807.1.8012.2.1.55	DisplayString	read-write
U32 msppDevFlushAllArp	1.3.6.1.4.1.3807.1.8012.2.1.43	Unsigned32	read-write	Flush all the arp.
U32 msppDevFlushDynamicArp	1.3.6.1.4.1.3807.1.8012.2.1.41	Unsigned32	read-write	Flush all dynamic arp.
INT msppDevFlushMac	1.3.6.1.4.1.3807.1.8012.2.1.10	INTEGER	read-write	counter value.
U32 msppDevFlushStaticArp	1.3.6.1.4.1.3807.1.8012.2.1.42	Unsigned32	read-write	Flush all static arp.
INT msppDevFtpd	1.3.6.1.4.1.3807.1.8012.2.1.27	INTEGER	read-write	NULL
msppDevGeneral	1.3.6.1.4.1.3807.1.8012.2.1
STR msppDevHwVersion	1.3.6.1.4.1.3807.1.8012.2.1.3	DisplayString	read-only	Node desription.
TIK msppDevLastChange	1.3.6.1.4.1.3807.1.8012.2.1.7	TimeTicks	read-only	in seconds.
INT msppDevLcd	1.3.6.1.4.1.3807.1.8012.2.1.25	INTEGER	read-write	NULL
INT msppDevLicenseEnable	1.3.6.1.4.1.3807.1.8012.2.1.37	INTEGER	read-write	enable or disable license key function. If you want to enable license key function, please designate 'msppDevLicenseKey' first
STR msppDevLicenseKey	1.3.6.1.4.1.3807.1.8012.2.1.38	DisplayString	read-write	licnese key.
STR msppDevLoggingInfo	1.3.6.1.4.1.3807.1.8012.2.1.53	DisplayString	read-only	Logging info
PHY msppDevMac	1.3.6.1.4.1.3807.1.8012.2.1.1	PhysAddress	read-only	mac address.
INT msppDevMirrorMode	1.3.6.1.4.1.3807.1.8012.2.1.24	INTEGER	read-write	NULL
INT msppDevMirrorToPort	1.3.6.1.4.1.3807.1.8012.2.1.23	INTEGER	read-write	NULL
INT msppDevMirrorToRspanVid	1.3.6.1.4.1.3807.1.8012.2.1.29	INTEGER	read-write	NULL
INT msppDevMirrorToTpid	1.3.6.1.4.1.3807.1.8012.2.1.30	INTEGER	read-write	NULL
U32 msppDevMtu	1.3.6.1.4.1.3807.1.8012.2.1.40	Unsigned32	read-write	The size of the largest datagram which can be sent/received on the equipment.
INT msppDevOsAction	1.3.6.1.4.1.3807.1.8012.2.1.15	INTEGER	read-write
STR msppDevOsFile	1.3.6.1.4.1.3807.1.8012.2.1.14	DisplayString	read-write
INT msppDevReboot	1.3.6.1.4.1.3807.1.8012.2.1.11	INTEGER	read-write	reboot
STR msppDevSerialNum	1.3.6.1.4.1.3807.1.8012.2.1.39	DisplayString	read-only	serial num.
STR msppDevSwVersion	1.3.6.1.4.1.3807.1.8012.2.1.4	DisplayString	read-only	Node desription.
INT msppDevTDMVlan	1.3.6.1.4.1.3807.1.8012.2.1.26	INTEGER	read-write	NULL
INT msppDevTelnetd	1.3.6.1.4.1.3807.1.8012.2.1.28	INTEGER	read-write	NULL
INT msppDevTemperature	1.3.6.1.4.1.3807.1.8012.2.1.20	INTEGER	read-write	current Temperature lowhest threshold.
INT msppDevTemperatureHThreshold	1.3.6.1.4.1.3807.1.8012.2.1.19	INTEGER	read-write	current Temperature lowhest threshold.
INT msppDevTemperatureLThreshold	1.3.6.1.4.1.3807.1.8012.2.1.18	INTEGER	read-write	current Temperature lowhest threshold.
INT msppDevTemperatureTrapEnable	1.3.6.1.4.1.3807.1.8012.2.1.21	INTEGER	read-write	current Temperature highhest threshold.
STR msppDevTime	1.3.6.1.4.1.3807.1.8012.2.1.9	DisplayString	read-write	set and get string format: 'yyyy/mm/dd hh:mm:ss'.
U32 msppDevTpid	1.3.6.1.4.1.3807.1.8012.2.1.52	Unsigned32	read-write	Protocol ID.0x8100 for 802.1q in 802.1q,0x9100 for none 802.1q in 802.1q
TIK msppDevUpTime	1.3.6.1.4.1.3807.1.8012.2.1.8	TimeTicks	read-only	in seconds.
INT msppDevVer	1.3.6.1.4.1.3807.1.8012.2.1.16	INTEGER	read-only	counter value.
INT msppDevWRED	1.3.6.1.4.1.3807.1.8012.2.1.22	INTEGER	read-write	weighted random early discard.enable or disable
INT msppFileExecMode	1.3.6.1.4.1.3807.1.8012.2.1.32	INTEGER	read-write	exec config file by master config file or backup config file. default:master.
OCT msppHttpVersion	1.3.6.1.4.1.3807.1.8012.2.1.61	OCTET STRING	read-only	Description.
STR msppInbandIp	1.3.6.1.4.1.3807.1.8012.2.1.34	DisplayString	read-write	inband ip address.
INT msppIpv4AddrNum	1.3.6.1.4.1.3807.1.8012.2.1.49	INTEGER	read-only	The number of ipv4 address.
INT msppl2AuxHashMode	1.3.6.1.4.1.3807.1.8012.2.1.48	INTEGER	read-write	L2 aux-hash mode configuration.
INT msppl2HashMode	1.3.6.1.4.1.3807.1.8012.2.1.46	INTEGER	read-write	L2 hash mode configuration.
INT msppl3HashMode	1.3.6.1.4.1.3807.1.8012.2.1.47	INTEGER	read-write	L3 hash mode configuration.
STR msppOutbandIp	1.3.6.1.4.1.3807.1.8012.2.1.35	DisplayString	read-write	outband ip address.
INT msppRebootFileMode	1.3.6.1.4.1.3807.1.8012.2.1.31	INTEGER	read-write	reboot config file by master config file or backup config file. default:master.
INT msppShareVlanEn	1.3.6.1.4.1.3807.1.8012.2.1.57	INTEGER	read-write
OCT msppSnmpVersion	1.3.6.1.4.1.3807.1.8012.2.1.60	OCTET STRING	read-only	Description.
INT msppUpgradeBkOs	1.3.6.1.4.1.3807.1.8012.2.1.33	INTEGER	read-write	upgrade master os or backup os. default:master.
INT msppUpgradeStatus	1.3.6.1.4.1.3807.1.8012.2.1.58	INTEGER	read-only
INT resetEraseCfg	1.3.6.1.4.1.3807.1.8012.2.1.36	INTEGER	read-write	erase config file when press reset button long. enable: erase.

RFC description

Manages network device types and textual conventions for bridge and VLAN configuration.

Start monitoring FiberHome Networks transport/access device (hardware-module inventory/fault status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WRI-DEVICE-MIB

What Is WRI-DEVICE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

RFC description