WRI-DEVICE-MIB :: resetEraseCfg

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsWRI-DEVICE-MIBresetEraseCfg

resetEraseCfg

Module: WRI-DEVICE-MIB

OID (symbolic): WRI-DEVICE-MIB::resetEraseCfg

OID (numeric): 1.3.6.1.4.1.3807.1.8012.2.1.36

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: erase config file when press reset button long. enable: erase.

What is resetEraseCfg?

This OID controls whether holding the physical reset button on the device erases its configuration file. Operators disable this to prevent accidental configuration wipes from a long button press, for example in an unsecured location.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3807.1.8012.2.1.36
snmpwalk -v2c -c public <target> WRI-DEVICE-MIB::resetEraseCfg

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3807.1.8012.2.1.36.1
snmpget -v2c -c public <target> WRI-DEVICE-MIB::resetEraseCfg.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3807.1.8012.2.1.36.1 i <value>

Start monitoring FiberHome Networks transport/access device (hardware-module inventory/fault status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WRI-DEVICE-MIB::resetEraseCfg OID value, configure state conditions and alerts, and monitor any FiberHome Networks transport/access device (hardware-module inventory/fault status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3807wriWRI-SMI
1.3.6.1.4.1.3807.1wriProductsWRI-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3807.1.8012msppWRI-DEVICE-MIB
1.3.6.1.4.1.3807.1.8012.2msppDevWRI-DEVICE-MIB
1.3.6.1.4.1.3807.1.8012.2.1msppDevGeneralWRI-DEVICE-MIB
1.3.6.1.4.1.3807.1.8012.2.1.36resetEraseCfgWRI-DEVICE-MIB