WAN-MIB :: ds1DeviceMode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WAN-MIB › ds1DeviceMode

ds1DeviceMode

Module: WAN-MIB

OID (symbolic): WAN-MIB::ds1DeviceMode

OID (numeric): 1.3.6.1.4.1.6889.2.1.6.2.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The configured device mode. Either all DS1s on the device are e1, t1 or j1. To activate a new selection, perform 'copy running-config startup-config' and reset the device.

What is ds1DeviceMode?

Sets the framing mode applied to all DS1 interfaces on this device: e1, t1, or j1; a device change requires a config save and reboot to take effect.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6889.2.1.6.2.1.1
snmpwalk -v2c -c public <target> WAN-MIB::ds1DeviceMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6889.2.1.6.2.1.1.1
snmpget -v2c -c public <target> WAN-MIB::ds1DeviceMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6889.2.1.6.2.1.1.1 i <value>

Start monitoring Avaya WAN access router/gateway (WAN link up/down/traffic-error counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WAN-MIB::ds1DeviceMode OID value, configure state conditions and alerts, and monitor any Avaya WAN access router/gateway (WAN link up/down/traffic-error counter status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6889avayaAV-APPLICATION-ENABLEMENT-SERVICES-MIB
1.3.6.1.4.1.6889.2mibsAV-APPLICATION-ENABLEMENT-SERVICES-MIB
1.3.6.1.4.1.6889.2.1lsgAVAYAGEN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6889.2.1.6avayaEISWanWAN-MIB
1.3.6.1.4.1.6889.2.1.6.2ifsWAN-MIB
1.3.6.1.4.1.6889.2.1.6.2.1ds1objsWAN-MIB
1.3.6.1.4.1.6889.2.1.6.2.1.1ds1DeviceModeWAN-MIB