WAG302

All MIBs › WAG302

Organization: NETGEAR Inc.

Last Updated: 2005-12-13

Category: Wireless and NETGEAR

Description: Manages NETGEAR WAG302 wireless access point settings, security parameters, client associations, and traffic statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WAG302?

WAG302 is a vendor-specific MIB for the NETGEAR ProSafe WAG302 802.11a/b/g wireless access point, part of NETGEAR's wireless enterprise product line (registered under the netgear.wireless.wag302 enterprise OID). It exposes management objects for wireless configuration (SSID, radio/security settings), associated wireless client information, and traffic statistics for the AP's wired and wireless interfaces. From a monitoring standpoint it is used to track the operational status of the AP's radios, the count of currently associated clients, and interface traffic counters, giving visibility into whether the access point is up, how loaded it is, and whether its security configuration matches policy. As an 802.11-based device MIB it likely complements standard IETF interface MIBs (IF-MIB) for basic interface counters while adding wireless-specific objects on top. It is deployed by network administrators managing small-to-midsize business wireless LANs built on NETGEAR ProSafe access points. Engineers can download the WAG302 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WAG302. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NETGEAR ProSafe WAG302 wireless access point

Monitoring Examples

No object/table names were supplied in the sample data for this MIB, so specific OIDs cannot be cited; however, based on the vendor description an admin would typically poll client-association objects to see how many wireless stations are currently connected to the WAG302, and traffic counters on its wireless interface to gauge throughput and detect congestion. Security-configuration objects would let an operator verify that WEP/WPA settings match policy. Because sample_objects is empty for this module, any specific table/object names would need to be confirmed directly against the MIB source rather than inferred here.

What Can Be Monitored

associated wireless client count
wireless interface traffic statistics
radio/security configuration state
AP operational status

Imported Objects

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
netgear	1.3.6.1.4.1.4526
wireless	1.3.6.1.4.1.4526.4
wag302	1.3.6.1.4.1.4526.4.7			The MIB module for 802.11a/b/g ProSafe Wireless Access Point entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).wireless(4).wag302(7)
lanSettings	1.3.6.1.4.1.4526.4.7.1
STR apName	1.3.6.1.4.1.4526.4.7.1.1	DisplayString	read-write	The field indicates the name of AP. The name is also the NETBIOS name of the AP.
MAC sysMacAddress	1.3.6.1.4.1.4526.4.7.1.2	MacAddress	read-only	This field indicates the system MAC Address.
STR sysVersion	1.3.6.1.4.1.4526.4.7.1.3	DisplayString	read-only	This field indicates the system firmware version.
INT sysCountryRegion	1.3.6.1.4.1.4526.4.7.1.4	INTEGER	read-write	This attribute shall indicate the region of operation for which which the wireless interface is intended.
STR adminName	1.3.6.1.4.1.4526.4.7.1.5	DisplayString	not-accessible	The field indicates the administrator name.
STR adminPasswd	1.3.6.1.4.1.4526.4.7.1.6	DisplayString	not-accessible	The field indicates the administrator password. The AP can be managed in such way as utility,telnet and so on.
INT dhcpStatus	1.3.6.1.4.1.4526.4.7.1.7	INTEGER	read-write	This attribute shall indicate whether dhcp client status.
IP ipAddr	1.3.6.1.4.1.4526.4.7.1.8	IpAddress	read-write	The field indicates the IP address of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same IP address, when worked in bridge mode.
IP netmaskAddr	1.3.6.1.4.1.4526.4.7.1.9	IpAddress	read-write	The field indicates the netmask of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same netmask address,when worked in bridge mode.
IP gatewayAddr	1.3.6.1.4.1.4526.4.7.1.10	IpAddress	read-write	The field indicates the gateway of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same gateway address,when worked in bridge mode.
IP pridnsipAddr	1.3.6.1.4.1.4526.4.7.1.11	IpAddress	read-write	This attributes shall indicates the IP address of the primary DNS server. ***The value can only be set to an IP address in dot format.
IP snddnsipAddr	1.3.6.1.4.1.4526.4.7.1.12	IpAddress	read-write	This attributes shall indicates the IP address of the secondary DNS server. ***The value can only be set to an IP address in dot format.
T/F spantree	1.3.6.1.4.1.4526.4.7.1.13	TruthValue	read-write	This attribute shall indicate spanning tree.
T/F vlanEnable	1.3.6.1.4.1.4526.4.7.1.14	TruthValue	read-only	This attribute shall indicate whether enable VLAN(802.1Q).
INT managementVlanID	1.3.6.1.4.1.4526.4.7.1.15	INTEGER	read-only	This attribute shall indicate the Management VLAN ID.
INT untaggedVlanID	1.3.6.1.4.1.4526.4.7.1.16	INTEGER	read-only	This attribute shall indicate the Untagged VLAN ID.
wlanSettingTable	1.3.6.1.4.1.4526.4.7.2		not-accessible	wlanSettingsallow for multiple instances on an agent.
wlanSettingEntry	1.3.6.1.4.1.4526.4.7.2.1		not-accessible	An entry in the wlanSettingTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT operatemode	1.3.6.1.4.1.4526.4.7.2.1.1	INTEGER	read-only	This attribute shall indicate the desired wireless operating mode. The option are: auto - Both 802.11g and 802.11b wireless stations can be used. dot11a - Only 802.11a wireless stations can be used. dot11b - All 802.11b wireless stations can be used. 802.11g wireless stations can still be used if they can operate in 802.11b mode. dot11g - Only 802.11g wireless stations can be used.
T/F radioEnable	1.3.6.1.4.1.4526.4.7.2.1.2	TruthValue	read-write	This attribute shall indicate whether the radio is enabled.
INT channel	1.3.6.1.4.1.4526.4.7.2.1.3	INTEGER	read-write	This attribute shall indicate the channel number to be used.
INT datarate	1.3.6.1.4.1.4526.4.7.2.1.4	INTEGER	read-only	This attribute shall indicate the transmite rate. When the operatemode is: auto(0) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, 11:11 Mb/s, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, and 54:54Mb/s. dot11a(1) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s and 54:54Mb/s. dot11b(2) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, and 11:11 Mb/s. dot11g(3) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s and 54:54Mb/s.
T/F wmmSupport	1.3.6.1.4.1.4526.4.7.2.1.5	TruthValue	read-write	This field indicates whether support WMM(Wireless Multimedia).
INT beaconinterval	1.3.6.1.4.1.4526.4.7.2.1.6	INTEGER	read-write	This attribute shall indicate the Beacon Interval.
INT rtsthreshold	1.3.6.1.4.1.4526.4.7.2.1.7	INTEGER	read-write	This attribute shall indicate the RTS threshold.
INT fraglength	1.3.6.1.4.1.4526.4.7.2.1.8	INTEGER	read-write	This attribute shall indicate the fragmentation threshold.
INT dtiminterval	1.3.6.1.4.1.4526.4.7.2.1.9	INTEGER	read-write	This attribute shall indicate the DTIM period.
INT preambletype	1.3.6.1.4.1.4526.4.7.2.1.10	INTEGER	read-only	This attribute shall indicate the preamble setting. This setting is only applicable to 802.11b mode.
INT txpower	1.3.6.1.4.1.4526.4.7.2.1.11	INTEGER	read-write	This attribute shall indicate the tranmiste power.
T/F superG	1.3.6.1.4.1.4526.4.7.2.1.12	TruthValue	read-write	This attribute shall indicate whether super mode (super-A for 11a radio, Super-G for 11g radio) is enabled.
INT accessControlMode	1.3.6.1.4.1.4526.4.7.2.1.13	INTEGER	read-only	The field indicates whether the access control list is enabled and the source of the database of the access control list.
INT antenna	1.3.6.1.4.1.4526.4.7.2.1.14	INTEGER	read-write	This attribute shall indicate the tranmistted power.
vapSetting	1.3.6.1.4.1.4526.4.7.3
vapWepAndGlobalSettingTable	1.3.6.1.4.1.4526.4.7.3.1		not-accessible	VAP attributes setting table.
vapWepAndGlobalSettingEntry	1.3.6.1.4.1.4526.4.7.3.1.1		not-accessible	VAP attributes setting table.
INT wepKeyType	1.3.6.1.4.1.4526.4.7.3.1.1.1	INTEGER	read-write	The field shall indicate the type of WEP key.
STR key1	1.3.6.1.4.1.4526.4.7.3.1.1.2	DisplayString	read-write	The field indicates the key value of the first default wep key.
STR key2	1.3.6.1.4.1.4526.4.7.3.1.1.3	DisplayString	read-write	The field indicates the key value of the second default wep key.
STR key3	1.3.6.1.4.1.4526.4.7.3.1.1.4	DisplayString	read-write	The field indicates the key value of the third default wep key.
STR key4	1.3.6.1.4.1.4526.4.7.3.1.1.5	DisplayString	read-write	The field indicates the key value of the fourth default wep key.
STR wepPassPhrase	1.3.6.1.4.1.4526.4.7.3.1.1.6	DisplayString	read-write	This attribute shall indicate WEP pass phrase, used to generate four WEP keys.
vapSettingTable	1.3.6.1.4.1.4526.4.7.3.2		not-accessible	VAP attributes setting table.
vapSettingEntry	1.3.6.1.4.1.4526.4.7.3.2.1		not-accessible	VAP attributes setting table.
INT vapIndex	1.3.6.1.4.1.4526.4.7.3.2.1.1	INTEGER	read-only	Description.
T/F vapEnable	1.3.6.1.4.1.4526.4.7.3.2.1.2	TruthValue	read-write	This attribute shall indicate whether enable VAP.
STR ssid	1.3.6.1.4.1.4526.4.7.3.2.1.3	DisplayString	read-write	This attribute shall indicate SSID.Its length can't be large than 33 .
T/F hidenetworkname	1.3.6.1.4.1.4526.4.7.3.2.1.4	TruthValue	read-write	This attribute shall indicate whether broadcast wireless network Name (SSID).
INT vlanID	1.3.6.1.4.1.4526.4.7.3.2.1.5	INTEGER	read-write	This attribute shall indicate the VLAN ID.
STR securityProfileName	1.3.6.1.4.1.4526.4.7.3.2.1.6	DisplayString	read-write	Description.
STR presharekey	1.3.6.1.4.1.4526.4.7.3.2.1.7	DisplayString	read-write	This attribute shall indicate preshare key.
INT authenticationtype	1.3.6.1.4.1.4526.4.7.3.2.1.8	INTEGER	read-write	The field indicates how to authenticate the station.
INT encryption	1.3.6.1.4.1.4526.4.7.3.2.1.9	INTEGER	read-write	The field indicates how to encryption the station.
INT keyno	1.3.6.1.4.1.4526.4.7.3.2.1.10	INTEGER	read-write	The field indicates the number of default wep key.
T/F wlanseparator	1.3.6.1.4.1.4526.4.7.3.2.1.11	TruthValue	read-write	This attribute shall indicate whether enable No see.
remoteSettings	1.3.6.1.4.1.4526.4.7.4
T/F sshd	1.3.6.1.4.1.4526.4.7.4.1	TruthValue	read-write	This attribute shall indicate whether the SSH is enabled.
T/F snmpenable	1.3.6.1.4.1.4526.4.7.4.2	TruthValue	read-only	This attribute shall indicate whether the SNMP agent is enabled.
IP trapServerIP	1.3.6.1.4.1.4526.4.7.4.3	IpAddress	read-write	The field indicates the trap server IP address. ***The value can only be set to an IP address in dot format.
STR trapServerCommunity	1.3.6.1.4.1.4526.4.7.4.4	DisplayString	read-write	The field indicates the community name for traps.
STR readOnlyCommunity	1.3.6.1.4.1.4526.4.7.4.5	DisplayString	read-write	The field indicates the read only community name. ***The value can only be set to 1 to 32 readable string.
STR readWriteCommunity	1.3.6.1.4.1.4526.4.7.4.6	DisplayString	read-write	The field indicates the read write community name. ***The value can only be set to 1 to 32 readable string.
statistic	1.3.6.1.4.1.4526.4.7.5
wiredethernetstat	1.3.6.1.4.1.4526.4.7.5.1
U32 lanrecvpacket	1.3.6.1.4.1.4526.4.7.5.1.1	Unsigned32	read-only	the field indicates the sum of received packets.
U32 lantranspacket	1.3.6.1.4.1.4526.4.7.5.1.2	Unsigned32	read-only	the field indicates the sum of transmitted packets.
U32 lanrecvbytes	1.3.6.1.4.1.4526.4.7.5.1.3	Unsigned32	read-only	the field indicates the sum of received bytes.
U32 lantransbytes	1.3.6.1.4.1.4526.4.7.5.1.4	Unsigned32	read-only	the field indicates the sum of transmitted bytes.
wirelessStatTable	1.3.6.1.4.1.4526.4.7.5.2		not-accessible	Description.
wirelessStatEntry	1.3.6.1.4.1.4526.4.7.5.2.1		not-accessible	Description.
U32 wlanrecvunicastpacket	1.3.6.1.4.1.4526.4.7.5.2.1.1	Unsigned32	read-only	the field indicates the sum of received unicast packets.
U32 wlantransunicastpacket	1.3.6.1.4.1.4526.4.7.5.2.1.2	Unsigned32	read-only	the field indicates the sum of transmitted unicast packets.
U32 wlanrecvbroadcastpacket	1.3.6.1.4.1.4526.4.7.5.2.1.3	Unsigned32	read-only	the field indicates the sum of received broadcast packets.
U32 wlantransbroadcastpacket	1.3.6.1.4.1.4526.4.7.5.2.1.4	Unsigned32	read-only	the field indicates the sum of transmitted broadcast packets.
U32 wlanrecvmulticastpacket	1.3.6.1.4.1.4526.4.7.5.2.1.5	Unsigned32	read-only	the field indicates the sum of received multicast packets.
U32 wlantransmulticastpacket	1.3.6.1.4.1.4526.4.7.5.2.1.6	Unsigned32	read-only	the field indicates the sum of transmitted multicast packets.
U32 wlanrecvpacket	1.3.6.1.4.1.4526.4.7.5.2.1.7	Unsigned32	read-only	the field indicates the sum of received packets.
U32 wlantranspacket	1.3.6.1.4.1.4526.4.7.5.2.1.8	Unsigned32	read-only	the field indicates the sum of transmitted packets.
U32 wlanrecvbytes	1.3.6.1.4.1.4526.4.7.5.2.1.9	Unsigned32	read-only	the field indicates the sum of received bytes.
U32 wlantransbytes	1.3.6.1.4.1.4526.4.7.5.2.1.10	Unsigned32	read-only	the field indicates the sum of transmitted bytes.
stationListTable	1.3.6.1.4.1.4526.4.7.6		not-accessible	stationList Table show multiple instances on an agent.
stationListEntry	1.3.6.1.4.1.4526.4.7.6.1		not-accessible	An entry in the wlanClientsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
MAC macaddress	1.3.6.1.4.1.4526.4.7.6.1.1	MacAddress	read-only	This attribute shall indicate MAC address of the associated stationID.
IP clientIpaddr	1.3.6.1.4.1.4526.4.7.6.1.2	IpAddress	read-only	This attribute shall indicate Ip address of the associated stationID.
INT clientWirelessMode	1.3.6.1.4.1.4526.4.7.6.1.3	INTEGER	read-only	This attribute shall indicate the wireless mode of the associated stationID.
INT stationstatus	1.3.6.1.4.1.4526.4.7.6.1.4	INTEGER	read-only	This attribute shall indicate the status of station.
wlanWdsTable	1.3.6.1.4.1.4526.4.7.7		not-accessible	WDS attributes in tablular form to allow for multiple instances on an agent.
wlanWdsEntry	1.3.6.1.4.1.4526.4.7.7.1		not-accessible	An entry in the wlanWdsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT apmode	1.3.6.1.4.1.4526.4.7.7.1.1	INTEGER	read-only	This a command field for conntrol AP operation mode.
MAC ptpremotemacaddress	1.3.6.1.4.1.4526.4.7.7.1.2	MacAddress	read-write	This attribute shall indicate the stationID.
MAC pxpremotemacaddress1	1.3.6.1.4.1.4526.4.7.7.1.3	MacAddress	read-write	This attribute shall indicate the stationID.
MAC pxpremotemacaddress2	1.3.6.1.4.1.4526.4.7.7.1.4	MacAddress	read-write	This attribute shall indicate the stationID.
MAC pxpremotemacaddress3	1.3.6.1.4.1.4526.4.7.7.1.5	MacAddress	read-write	This attribute shall indicate the stationID.
MAC pxpremotemacaddress4	1.3.6.1.4.1.4526.4.7.7.1.6	MacAddress	read-write	This attribute shall indicate the stationID.
MAC repremotemacaddress1	1.3.6.1.4.1.4526.4.7.7.1.7	MacAddress	read-write	This attribute shall indicate the stationID.
MAC repremotemacaddress2	1.3.6.1.4.1.4526.4.7.7.1.8	MacAddress	read-write	This attribute shall indicate the stationID.
MAC repremotemacaddress3	1.3.6.1.4.1.4526.4.7.7.1.9	MacAddress	read-write	This attribute shall indicate the stationID.
MAC repremotemacaddress4	1.3.6.1.4.1.4526.4.7.7.1.10	MacAddress	read-write	This attribute shall indicate the stationID.
MAC localMacAddress	1.3.6.1.4.1.4526.4.7.7.1.11	MacAddress	read-only	This attribute shall indicate the local MAC Address.
info802dot1x	1.3.6.1.4.1.4526.4.7.8
authinfo	1.3.6.1.4.1.4526.4.7.8.1
IP priradipaddr	1.3.6.1.4.1.4526.4.7.8.1.1	IpAddress	read-write	Internet address of the Primary Radius Server.
INT priradport	1.3.6.1.4.1.4526.4.7.8.1.2	INTEGER	read-write	Port number used for authentication at the Primary Radius Server.
STR priradsharedsecret	1.3.6.1.4.1.4526.4.7.8.1.3	DisplayString	read-write	Secret shared between NAS and the Primary Radius Server.
IP sndradipaddr	1.3.6.1.4.1.4526.4.7.8.1.4	IpAddress	read-write	Internet address of the Second Radius Server.
INT sndradport	1.3.6.1.4.1.4526.4.7.8.1.5	INTEGER	read-write	Port number used for authentication at the Second Radius Server.
STR sndradsharedsecret	1.3.6.1.4.1.4526.4.7.8.1.6	DisplayString	read-write	Secret shared between NAS and the Second Radius Server.
accntinfo	1.3.6.1.4.1.4526.4.7.8.2
IP priacntipaddr	1.3.6.1.4.1.4526.4.7.8.2.1	IpAddress	read-write	IP address of the Primary radius account server.
INT priacntport	1.3.6.1.4.1.4526.4.7.8.2.2	INTEGER	read-write	port number of the Primary radius account server.
STR priacntsharedsecret	1.3.6.1.4.1.4526.4.7.8.2.3	DisplayString	read-write	password used by the ap to connect to the Primary radius account serve.
IP sndacntipaddr	1.3.6.1.4.1.4526.4.7.8.2.4	IpAddress	read-write	IP address of the Second radius account server.
INT sndacntport	1.3.6.1.4.1.4526.4.7.8.2.5	INTEGER	read-write	port number of the Second radius account server.
STR sndacntsharedsecret	1.3.6.1.4.1.4526.4.7.8.2.6	DisplayString	read-write	password used by the ap to connect to the Second radius account server.
userCommand	1.3.6.1.4.1.4526.4.7.9
INT resetAP	1.3.6.1.4.1.4526.4.7.9.1	INTEGER	read-write	This a command field for conntrol AP action. Write value 1 to reset the AP.
timeSettings	1.3.6.1.4.1.4526.4.7.10
STR currenttime	1.3.6.1.4.1.4526.4.7.10.1	DisplayString	read-only	This field indicates the current system time in a format: YYYY/MM/DD hh:mm:ss.
INT timezone	1.3.6.1.4.1.4526.4.7.10.2	INTEGER	read-write	This field indicates the timezone of the system.
T/F daylightsaving	1.3.6.1.4.1.4526.4.7.10.3	TruthValue	read-write	This attribute shall indicate the Daylight Saving time.
dhcpsSettings	1.3.6.1.4.1.4526.4.7.11
T/F dhcpserver	1.3.6.1.4.1.4526.4.7.11.1	TruthValue	read-write	This attribute shall indicate whether DHCP server is enable or disable.
IP dhcpsipstart	1.3.6.1.4.1.4526.4.7.11.2	IpAddress	read-write	This attribute indicates the starting IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
IP dhcpsipend	1.3.6.1.4.1.4526.4.7.11.3	IpAddress	read-write	This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
IP dhcpnetmask	1.3.6.1.4.1.4526.4.7.11.4	IpAddress	read-write	This attribute indicates the net mask of DHCP server will give. ***The value can only be set to the net mask address in dot format.
IP dhcpsgateway	1.3.6.1.4.1.4526.4.7.11.5	IpAddress	read-write	This attribute indicates the gateway IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
IP dhcpspridns	1.3.6.1.4.1.4526.4.7.11.6	IpAddress	read-write	This attribute indicates the primary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
IP dhcpspsnddns	1.3.6.1.4.1.4526.4.7.11.7	IpAddress	read-write	This attribute indicates the secondary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
IP dhcpspriwins	1.3.6.1.4.1.4526.4.7.11.8	IpAddress	read-write	This attribute indicates the primary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
IP dhcpspsndwins	1.3.6.1.4.1.4526.4.7.11.9	IpAddress	read-write	This attribute indicates the secondary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
INT dhcpsleasetime	1.3.6.1.4.1.4526.4.7.11.10	INTEGER	read-write	This attribute shall indicate the IP lease time of DHCP server will give to DHCP clients in minutes
logSettings	1.3.6.1.4.1.4526.4.7.12
T/F syslog	1.3.6.1.4.1.4526.4.7.12.1	TruthValue	read-write	This attribute shall indicate whether syslog is enable or disable.
IP syslogsrvip	1.3.6.1.4.1.4526.4.7.12.2	IpAddress	read-write	This attributes shall indicates the IP address of the syslog server. ***The value can only be set to a IP address in dot format.
INT syslogsrvport	1.3.6.1.4.1.4526.4.7.12.3	INTEGER	read-write	This attributes shall indicates the Port of the Syslog server. *** The value can only be set to a port in dot format.
httpRedirectSettings	1.3.6.1.4.1.4526.4.7.13
T/F httpRedirectEnable	1.3.6.1.4.1.4526.4.7.13.1	TruthValue	read-write	Description.
STR httpRedirectURL	1.3.6.1.4.1.4526.4.7.13.2	DisplayString	read-write	Description.
detectedApTable	1.3.6.1.4.1.4526.4.7.14		not-accessible	detectedAp Table shows list of detected neighbouring APs.
detectedApEntry	1.3.6.1.4.1.4526.4.7.14.1		not-accessible	An entry in the detectedApTable.
MAC apmac	1.3.6.1.4.1.4526.4.7.14.1.1	MacAddress	read-only	This attribute shall indicate MAC address of the detected AP.
STR apssid	1.3.6.1.4.1.4526.4.7.14.1.2	DisplayString	read-only	This attribute shall indicate ssid of the detected AP.
T/F apprivacy	1.3.6.1.4.1.4526.4.7.14.1.3	TruthValue	read-only	This attribute shall indicate whether privacy is enabled.
STR apband	1.3.6.1.4.1.4526.4.7.14.1.4	DisplayString	read-only	This attribute shall indicate the operating band of detected AP.
INT apchannel	1.3.6.1.4.1.4526.4.7.14.1.5	INTEGER	read-only	This attribute shall indicate the channel number used.
INT aprate	1.3.6.1.4.1.4526.4.7.14.1.6	INTEGER	read-only	This attribute shall indicate the rate.
INT apbeaconInterval	1.3.6.1.4.1.4526.4.7.14.1.7	INTEGER	read-only	This attribute shall indicate the beacon interval in kus (1.024 ms).
INT apnumBeacons	1.3.6.1.4.1.4526.4.7.14.1.8	INTEGER	read-only	This attribute shall indicate the number of beacons received.
INT aplastBeacon	1.3.6.1.4.1.4526.4.7.14.1.9	INTEGER	read-only	This attribute shall indicate the time of the last beacon.
knownApTable	1.3.6.1.4.1.4526.4.7.15		not-accessible	knownAp Table shows list of known APs.
knownApEntry	1.3.6.1.4.1.4526.4.7.15.1		not-accessible	An entry in the knownApTable.
MAC knownapmac	1.3.6.1.4.1.4526.4.7.15.1.1	MacAddress	read-only	This attribute shall indicate MAC address of the known AP.
STR knownapssid	1.3.6.1.4.1.4526.4.7.15.1.2	DisplayString	read-only	This attribute shall indicate ssid of the known AP.
T/F knownapprivacy	1.3.6.1.4.1.4526.4.7.15.1.3	TruthValue	read-only	This attribute shall indicate whether privacy is enabled.
STR knownapband	1.3.6.1.4.1.4526.4.7.15.1.4	DisplayString	read-only	This attribute shall indicate the operating band of known AP.
INT knownapchannel	1.3.6.1.4.1.4526.4.7.15.1.5	INTEGER	read-only	This attribute shall indicate the channel number used.
INT knownaprate	1.3.6.1.4.1.4526.4.7.15.1.6	INTEGER	read-only	This attribute shall indicate the rate.
INT knownapbeaconInterval	1.3.6.1.4.1.4526.4.7.15.1.7	INTEGER	read-only	This attribute shall indicate the beacon interval in kus (1.024 ms).
INT knownapnumBeacons	1.3.6.1.4.1.4526.4.7.15.1.8	INTEGER	read-only	This attribute shall indicate the number of beacons received.
INT knownaplastBeacon	1.3.6.1.4.1.4526.4.7.15.1.9	INTEGER	read-only	This attribute shall indicate the time of the last beacon.
INT knownapEntryStatus	1.3.6.1.4.1.4526.4.7.15.1.10	INTEGER	read-create	The Known AP Entry status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
unknownApTable	1.3.6.1.4.1.4526.4.7.16		not-accessible	unknownAp Table shows list of unknown APs.
unknownApEntry	1.3.6.1.4.1.4526.4.7.16.1		not-accessible	An entry in the unknownApTable.
MAC unknownapmac	1.3.6.1.4.1.4526.4.7.16.1.1	MacAddress	read-only	This attribute shall indicate MAC address of the unknown AP.
STR unknownapssid	1.3.6.1.4.1.4526.4.7.16.1.2	DisplayString	read-only	This attribute shall indicate ssid of the unknown AP.
T/F unknownapprivacy	1.3.6.1.4.1.4526.4.7.16.1.3	TruthValue	read-only	This attribute shall indicate whether privacy is enabled.
STR unknownapband	1.3.6.1.4.1.4526.4.7.16.1.4	DisplayString	read-only	This attribute shall indicate the operating band of unknown AP.
INT unknownapchannel	1.3.6.1.4.1.4526.4.7.16.1.5	INTEGER	read-only	This attribute shall indicate the channel number used.
INT unknownaprate	1.3.6.1.4.1.4526.4.7.16.1.6	INTEGER	read-only	This attribute shall indicate the rate.
INT unknownapbeaconInterval	1.3.6.1.4.1.4526.4.7.16.1.7	INTEGER	read-only	This attribute shall indicate the beacon interval in kus (1.024 ms).
INT unknownapnumBeacons	1.3.6.1.4.1.4526.4.7.16.1.8	INTEGER	read-only	This attribute shall indicate the number of beacons received.
INT unknownaplastBeacon	1.3.6.1.4.1.4526.4.7.16.1.9	INTEGER	read-only	This attribute shall indicate the time of the last beacon.
wlanAccessControlLocalTable	1.3.6.1.4.1.4526.4.7.17		not-accessible	ACL attributes in tablular form to allow for multiple instances on an agent.
wlanAccessControlLocalEntry	1.3.6.1.4.1.4526.4.7.17.1		not-accessible	An entry in the wlanAccessControlListTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
MAC aclMAC	1.3.6.1.4.1.4526.4.7.17.1.1	MacAddress	read-only	This field should indicate an MAC address entry in the access control local database. When write this field aclMAC=000000000000, shall remove current MAC address from local database. Otherwise, shall update the MAC address.
INT aclMacStatus	1.3.6.1.4.1.4526.4.7.17.1.2	INTEGER	read-create	The ACL Mac status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry

RFC description

802.11a/b/g ProSafe wireless access point management for NETGEAR WAG302.

Start monitoring NETGEAR ProSafe WAG302 wireless access point (radio operational status/client-association count status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WAG302

What Is WAG302?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description