WAG102

All MIBs › WAG102

Organization: NETGEAR Inc.

Last Updated: 2005-11-18

Category: Wireless and NETGEAR

Description: Manages NETGEAR WAG102 dual-band wireless access point configuration, client associations, and radio statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WAG102?

This MIB is NETGEAR's management module for the WAG102 ProSafe dual-band 802.11a/b/g wireless access point, part of NETGEAR's enterprise-class wireless product line (enterprise OID netgear.wireless.wag102). It covers AP configuration, wireless client associations, and radio statistics for the device's 802.11a/b/g radios. Monitoring use centers on tracking radio/RF statistics and client association counts as an indicator of wireless service health, alongside general device operational status, though no CPU/memory/environmental object names were confirmed in the extracted data. No specific dependency on other MIBs is evident beyond standard SNMP infrastructure. It is deployed in small-to-midsize wireless LAN installations using NETGEAR ProSafe access points, either standalone or in a lightly managed multi-AP setup. Engineers can download the WAG102 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WAG102. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NETGEAR WAG102 wireless access point

Monitoring Examples

No sample object or table names were extracted for this module, so specific OIDs cannot be cited; conceptually an administrator would poll client association counts and radio statistics to detect an overloaded radio or a spike in disassociations indicating RF interference. Without a verified object list, more granular technical detail would be speculative.

What Can Be Monitored

wireless client associations
radio/RF statistics
AP configuration state
operational status

Imported Objects

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
netgear	1.3.6.1.4.1.4526
wireless	1.3.6.1.4.1.4526.4
wag102	1.3.6.1.4.1.4526.4.5			The MIB module for 802.11a/b/g ProSafe Wireless Access Point entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).wireless(4).wag102(5)
sysSettings	1.3.6.1.4.1.4526.4.5.1
STR sysMacAddress	1.3.6.1.4.1.4526.4.5.1.1	DisplayString	read-only	This field indicates the system MAC Address.
STR sysVersion	1.3.6.1.4.1.4526.4.5.1.2	DisplayString	read-only	This field indicates the system firmware version.
STR sysAPName	1.3.6.1.4.1.4526.4.5.1.3	DisplayString	read-write	This field indicates the name of AP. The name is also the NETBIOS name of the AP.
STR sysAdminName	1.3.6.1.4.1.4526.4.5.1.4	DisplayString	not-accessible	This field indicates the administrator name, which is used to sign in web GUI, SSH, CLI, and FTP server of the AP.
STR sysAdminPasswd	1.3.6.1.4.1.4526.4.5.1.5	DisplayString	not-accessible	This field indicates the administrator password, which is used to sign in web GUI, SSH, CLI, and FTP server of the AP.
INT sysCountryRegion	1.3.6.1.4.1.4526.4.5.1.7	INTEGER	read-write	This field indicates the country/region of the AP.
timeSettings	1.3.6.1.4.1.4526.4.5.1.8
STR timeCurrentTime	1.3.6.1.4.1.4526.4.5.1.8.1	DisplayString	read-only	This field indicates the current system time in a format: YYYY/MM/DD hh:mm:ss.
INT timeTimeZone	1.3.6.1.4.1.4526.4.5.1.8.2	INTEGER	read-write	This field indicates the timezone of the system. 0 UK,GreenWich,Casablanca,Monrovia (GMT), -12 Eniwetok,Kwajalein (GMT-12:00), -11 Midway I., Samoa (GMT-11:00), -10 Hawaii (GMT-10:00), -9.5 Marqesas Is. (GMT-09:30), -9 Alaska (GMT-09:00), -8.5 Pitciarn Is. (GMT-08:30), -8 Pacific Time ..US and Canada (GMT-08:00), -7 MountainTime(USA),Arizona (GMT-07:00), -6 CentralTime(USA),Mexico City,Tequciqalpa (GMT-06:00), -5 EasternTime(USA),Bogota,Lima,Quito,Indiana East (GMT-05:00), -4 Caracas,La Paz (GMT-04:00), -3.5 Newfoundland (GMT-03:30), -3 Brasilia,Beunos Aires,Georgetown (GMT-03:00), -2 Mid-Atlantic (GMT-02:00), -1 Azores,Cape Verde Is. (GMT-01:00), 1 Europe (GMT+01:00), 2 Egypt,Finland,Romania,Turkey,Greece,Israel,Jordan(GMT+02:00), 3 Iraq, Syria,Russia (GMT+03:00), 3.5 Iran (GMT+03:30), 4 Armenia, Azerbaijan (GMT+04:00), 4.5 Afghanistan (GMT+04:30), 5 Russia,Pakistan (GMT+05:00), 5.5 India (GMT+05:30), 6 Bangladesh,Russia (GMT+06:00), 6.5 Burma (GMT+06:30), 7 Russia,Thailand, Combodia, Laos (GMT+07:00), 8 Russia,China,Mongolia,Indonesia,Philippines,Taiwan,WA (GMT+08:00), 9 Russia,Japan,Korea (GMT+09:00), 9.5 Adelaide,Darwin (GMT+09:30), 10 Eastern Standard(Aust),Russia,Gaum,Papua New Guinea (GMT+10:00)
T/F timeDaylightSaving	1.3.6.1.4.1.4526.4.5.1.8.3	TruthValue	read-write	This field indicates whether the Daylight Saving time is used.
ipSettings	1.3.6.1.4.1.4526.4.5.1.9
T/F ipDhcpClientEnable	1.3.6.1.4.1.4526.4.5.1.9.1	TruthValue	read-write	This field indicates whether DHCP client is enabled.
IP ipIPAddress	1.3.6.1.4.1.4526.4.5.1.9.2	IpAddress	read-write	This field indicates the IP address of the AP.
IP ipNetmask	1.3.6.1.4.1.4526.4.5.1.9.3	IpAddress	read-write	This field indicates the netmask addressof the AP.
IP ipGateway	1.3.6.1.4.1.4526.4.5.1.9.4	IpAddress	read-write	This field indicates the default gateway address of the AP.
IP ipDnsServer	1.3.6.1.4.1.4526.4.5.1.9.5	IpAddress	read-write	This field indicates the IP address of the DNS server. *** Note: The value can only be set to an IP address in dot format.
wlanSettings	1.3.6.1.4.1.4526.4.5.2
wlanSettingTable	1.3.6.1.4.1.4526.4.5.2.1		not-accessible	wlanSettingsallow for multiple instances on an agent.
wlanSettingEntry	1.3.6.1.4.1.4526.4.5.2.1.1		not-accessible	An entry in the wlanSettingTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT radioIndex	1.3.6.1.4.1.4526.4.5.2.1.1.1	INTEGER	read-only	This attribute shall indicate the radio's band.
T/F radioEnable	1.3.6.1.4.1.4526.4.5.2.1.1.2	TruthValue	read-write	This attribute shall indicate whether the radio is enabled.
INT wirelessMode	1.3.6.1.4.1.4526.4.5.2.1.1.5	INTEGER	read-write	This attribute shall indicate the desired wireless operating mode. Options are: auto - Both 802.11g and 802.11b wireless stations can be used. dot11a - Only 802.11a wireless stations can be used. dot11b - All 802.11b wireless stations can be used. 802.11g wireless stations can still be used if they can operate in 802.11b mode. dot11g - Only 802.11g wireless stations can be used.
INT channel	1.3.6.1.4.1.4526.4.5.2.1.1.6	INTEGER	read-write	This attribute shall indicate the channel number to be used. And the zero indicates that auto channel selection is enabled.
INT txRate	1.3.6.1.4.1.4526.4.5.2.1.1.7	INTEGER	read-write	This attribute shall indicate the transmite rate. When the operatemode is: auto(0) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, 11:11 Mb/s, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, and 54:54Mb/s. dot11a(1) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, 54:54Mb/s. dot11b(2) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, and 11:11 Mb/s. dot11g(3) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, 54:54Mb/s.
INT txPower	1.3.6.1.4.1.4526.4.5.2.1.1.8	INTEGER	read-write	This attribute shall indicate the transmitting power.
INT beaconInterval	1.3.6.1.4.1.4526.4.5.2.1.1.9	INTEGER	read-write	This attribute shall indicate the beacon interval.
INT dtimInterval	1.3.6.1.4.1.4526.4.5.2.1.1.10	INTEGER	read-write	This attribute shall indicate the DTIM period.
INT rtsThreshold	1.3.6.1.4.1.4526.4.5.2.1.1.11	INTEGER	read-write	This attribute shall indicate the RTS threshold.
INT fragmentationThreshold	1.3.6.1.4.1.4526.4.5.2.1.1.12	INTEGER	read-write	This attribute shall indicate the fragmentation threshold.
INT dot11bPreamble	1.3.6.1.4.1.4526.4.5.2.1.1.13	INTEGER	read-write	This attribute shall indicate the preamble setting. This setting is only applicable to 802.11b mode.
T/F superMode	1.3.6.1.4.1.4526.4.5.2.1.1.14	TruthValue	read-write	This attribute shall indicate whether super mode (super-A for 11a radio, Super-G for 11g radio) is enabled.
T/F wmm	1.3.6.1.4.1.4526.4.5.2.1.1.15	TruthValue	read-write	This attribute shall indicate whether wmm is enabled.
T/F wmmNoAck	1.3.6.1.4.1.4526.4.5.2.1.1.16	TruthValue	read-write	This attribute shall indicate whether wmm with no ack is enabled.
INT accessControlMode	1.3.6.1.4.1.4526.4.5.2.1.1.20	INTEGER	read-write	The field indicates whether the access control list is enabled and the source of the database of the access control list.
wlanSecurityTable	1.3.6.1.4.1.4526.4.5.2.2		not-accessible	Security attributes in tablular form to allow for multiple instances on an agent.
wlanSecurityEntry	1.3.6.1.4.1.4526.4.5.2.2.1		not-accessible	An entry in the securityTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT securityProfileNo	1.3.6.1.4.1.4526.4.5.2.2.1.1	INTEGER	read-only	The field indicates the security profile NO.
T/F securityProfileEnabled	1.3.6.1.4.1.4526.4.5.2.2.1.2	TruthValue	read-write	This attribute shall indicate whether the security profile is enabled.
STR securityProfileName	1.3.6.1.4.1.4526.4.5.2.2.1.3	DisplayString	read-write	This attribute shall indicate SSID.
STR ssid	1.3.6.1.4.1.4526.4.5.2.2.1.4	DisplayString	read-write	This attribute shall indicate SSID.
T/F ssidBroadcastEnable	1.3.6.1.4.1.4526.4.5.2.2.1.5	TruthValue	read-write	This attribute shall indicate whether wireless network Name (SSID) will be broadcasted.
INT authentication	1.3.6.1.4.1.4526.4.5.2.2.1.6	INTEGER	read-write	The field indicates how to authenticate the station.
INT encryption	1.3.6.1.4.1.4526.4.5.2.2.1.7	INTEGER	read-write	The field indicates how to encryption the data and the type of WEP key.
STR wepKey1	1.3.6.1.4.1.4526.4.5.2.2.1.8	DisplayString	read-write	The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
STR wepKey2	1.3.6.1.4.1.4526.4.5.2.2.1.9	DisplayString	read-write	The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
STR wepKey3	1.3.6.1.4.1.4526.4.5.2.2.1.10	DisplayString	read-write	The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
STR wepKey4	1.3.6.1.4.1.4526.4.5.2.2.1.11	DisplayString	read-write	The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
INT wepKeyDefault	1.3.6.1.4.1.4526.4.5.2.2.1.12	INTEGER	read-write	The field shall indicate the WEP key number to encrypt TX data.
STR wpaPSK	1.3.6.1.4.1.4526.4.5.2.2.1.13	DisplayString	read-write	This attribute shall indicate WPA Pre-Shared Key.
T/F wlanSeparatorEnable	1.3.6.1.4.1.4526.4.5.2.2.1.14	TruthValue	read-write	This attribute shall indicate whether block the communications between two wireless clients.
wlanAccessControlLocalTable	1.3.6.1.4.1.4526.4.5.2.3		not-accessible	ACL attributes in tablular form to allow for multiple instances on an agent.
wlanAccessControlLocalEntry	1.3.6.1.4.1.4526.4.5.2.3.1		not-accessible	An entry in the wlanAccessControlListTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT aclIndex	1.3.6.1.4.1.4526.4.5.2.3.1.1	INTEGER	not-accessible	This field should indicate an index to the access control local database entry. When write this field aclIndex=9999, shall append new MAC address into the local database
STR aclMAC	1.3.6.1.4.1.4526.4.5.2.3.1.2	DisplayString	read-write	This field should indicate an MAC address entry in the access control local database. When write this field aclMAC=000000000000, shall remove current MAC address from local database. Otherwise, shall update the MAC address.
wlanWdsTable	1.3.6.1.4.1.4526.4.5.2.4		not-accessible	WDS attributes in tablular form to allow for multiple instances on an agent.
wlanWdsEntry	1.3.6.1.4.1.4526.4.5.2.4.1		not-accessible	An entry in the wlanWdsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT operationMode	1.3.6.1.4.1.4526.4.5.2.4.1.1	INTEGER	read-write	This attribute shall indicate the operation mode.
STR localMacAddress	1.3.6.1.4.1.4526.4.5.2.4.1.2	DisplayString	read-only	This attribute shall indicate the local MAC Address.
STR ptpRemoteMacAddress	1.3.6.1.4.1.4526.4.5.2.4.1.3	DisplayString	read-write	This attribute shall indicate the stationID.
STR pxpRemoteMacAddress1	1.3.6.1.4.1.4526.4.5.2.4.1.4	DisplayString	read-write	This attribute shall indicate the stationID.
STR pxpRemoteMacAddress2	1.3.6.1.4.1.4526.4.5.2.4.1.5	DisplayString	read-write	This attribute shall indicate the stationID.
STR pxpRemoteMacAddress3	1.3.6.1.4.1.4526.4.5.2.4.1.6	DisplayString	read-write	This attribute shall indicate the stationID.
STR pxpRemoteMacAddress4	1.3.6.1.4.1.4526.4.5.2.4.1.7	DisplayString	read-write	This attribute shall indicate the stationID.
STR repeaterParentMacAddress	1.3.6.1.4.1.4526.4.5.2.4.1.8	DisplayString	read-write	This attribute shall indicate the stationID.
STR repeaterChildMacAddress	1.3.6.1.4.1.4526.4.5.2.4.1.9	DisplayString	read-write	This attribute shall indicate the stationID.
wlanClientsTable	1.3.6.1.4.1.4526.4.5.2.5		not-accessible	wireless clients attributes in tablular form to allow for multiple instances on an agent.
wlanClientsEntry	1.3.6.1.4.1.4526.4.5.2.5.1		not-accessible	An entry in the wlanClientsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
INT clientIndex	1.3.6.1.4.1.4526.4.5.2.5.1.1	INTEGER	read-only	This attribute shall indicate sequence number (ID) of the associated station.
STR clientMacAddress	1.3.6.1.4.1.4526.4.5.2.5.1.2	DisplayString	read-only	This attribute shall indicate MAC address of the associated stationID.
IP clientIP	1.3.6.1.4.1.4526.4.5.2.5.1.3	IpAddress	read-only	This attribute shall indicate the IP address of the associated stationID.
STR clientSSID	1.3.6.1.4.1.4526.4.5.2.5.1.4	DisplayString	read-only	This attribute shall indicate the SSID that the wireless client associates to.
INT clientStatus	1.3.6.1.4.1.4526.4.5.2.5.1.5	INTEGER	read-only	This attribute shall indicate the status of the associated stationID.
vlanSettings	1.3.6.1.4.1.4526.4.5.3
T/F vlanEnable	1.3.6.1.4.1.4526.4.5.3.1	TruthValue	read-write	This attribute shall indicate whether vlan(802.1Q) is enabled.
INT managementVlanId	1.3.6.1.4.1.4526.4.5.3.2	INTEGER	read-write	This attribute shall indicate the management VLAN ID.
securityProfileVlanTable	1.3.6.1.4.1.4526.4.5.3.3		not-accessible	Description.
securityProfileVlanEntry	1.3.6.1.4.1.4526.4.5.3.3.1		not-accessible	Description.
INT profileNo	1.3.6.1.4.1.4526.4.5.3.3.1.1	INTEGER	read-only	the field indicates the security profile NO.
INT profileVlan	1.3.6.1.4.1.4526.4.5.3.3.1.2	INTEGER	read-write	the field indicates the security profile's VLAN.
sysStatistics	1.3.6.1.4.1.4526.4.5.4
ethernetStat	1.3.6.1.4.1.4526.4.5.4.1
U32 ethInPackets	1.3.6.1.4.1.4526.4.5.4.1.1	Unsigned32	read-only	the field indicates the sum of received packets.
U32 ethOutPackets	1.3.6.1.4.1.4526.4.5.4.1.2	Unsigned32	read-only	the field indicates the sum of transmitted packets.
U32 ethInBytes	1.3.6.1.4.1.4526.4.5.4.1.3	Unsigned32	read-only	the field indicates the sum of received bytes.
U32 ethOutBytes	1.3.6.1.4.1.4526.4.5.4.1.4	Unsigned32	read-only	the field indicates the sum of transmitted bytes.
wirelessStatTable	1.3.6.1.4.1.4526.4.5.4.2		not-accessible	Description.
wirelessStatEntry	1.3.6.1.4.1.4526.4.5.4.2.1		not-accessible	Description.
INT wlanSecurityProfileNo	1.3.6.1.4.1.4526.4.5.4.2.1.1	INTEGER	read-only	the field indicates the security profile NO.
U32 wlanInPacketsUnicast	1.3.6.1.4.1.4526.4.5.4.2.1.2	Unsigned32	read-only	the field indicates the sum of received unicast packets.
U32 wlanOutPacketsUnicast	1.3.6.1.4.1.4526.4.5.4.2.1.3	Unsigned32	read-only	the field indicates the sum of transmitted unicast packets.
U32 wlanInPacketsBroadcast	1.3.6.1.4.1.4526.4.5.4.2.1.4	Unsigned32	read-only	the field indicates the sum of received broadcast packets.
U32 wlanOutPacketsBroadcast	1.3.6.1.4.1.4526.4.5.4.2.1.5	Unsigned32	read-only	the field indicates the sum of transmitted broadcast packets.
U32 wlanInPacketsMulticast	1.3.6.1.4.1.4526.4.5.4.2.1.6	Unsigned32	read-only	the field indicates the sum of received multicast packets.
U32 wlanOutPacketsMulticast	1.3.6.1.4.1.4526.4.5.4.2.1.7	Unsigned32	read-only	the field indicates the sum of transmitted multicast packets.
U32 wlanInPacketsTotal	1.3.6.1.4.1.4526.4.5.4.2.1.8	Unsigned32	read-only	the field indicates the sum of received packets.
U32 wlanOutPacketsTotal	1.3.6.1.4.1.4526.4.5.4.2.1.9	Unsigned32	read-only	the field indicates the sum of transmitted packets.
U32 wlanInBytesTotal	1.3.6.1.4.1.4526.4.5.4.2.1.10	Unsigned32	read-only	the field indicates the sum of received bytes.
U32 wlanOutBytesTotal	1.3.6.1.4.1.4526.4.5.4.2.1.11	Unsigned32	read-only	the field indicates the sum of transmitted bytes.
radiusSettings	1.3.6.1.4.1.4526.4.5.5
radiusAuthPrimaryServer	1.3.6.1.4.1.4526.4.5.5.1
IP radiusAuthPrimaryServerIP	1.3.6.1.4.1.4526.4.5.5.1.1	IpAddress	read-write	This field shall indicate the primary authentication RADIUS server IP address.
INT radiusAuthPrimaryServerPort	1.3.6.1.4.1.4526.4.5.5.1.2	INTEGER	read-write	This field shall indicate the primary authentication RADIUS server port number. Default: 1812.
STR radiusAuthPrimaryServerSecret	1.3.6.1.4.1.4526.4.5.5.1.3	DisplayString	read-write	This field shall indicate the primary authentication RADIUS server shared secret string.
radiusAuthSecondaryServer	1.3.6.1.4.1.4526.4.5.5.2
IP radiusAuthSecondaryServerIP	1.3.6.1.4.1.4526.4.5.5.2.1	IpAddress	read-write	This field shall indicate the secondary authentication RADIUS server IP address.
INT radiusAuthSecondaryServerPort	1.3.6.1.4.1.4526.4.5.5.2.2	INTEGER	read-write	This field shall indicate the secondary authentication RADIUS server port number. Default: 1812.
STR radiusAuthSecondaryServerSecret	1.3.6.1.4.1.4526.4.5.5.2.3	DisplayString	read-write	This field shall indicate the secondary authentication RADIUS server shared secret string.
authenticationSettings	1.3.6.1.4.1.4526.4.5.5.3
INT reauthTime	1.3.6.1.4.1.4526.4.5.5.3.1	INTEGER	read-write	This attribute shall indicate 802.1x reauth time.
INT wpaGroupKeyUpdateCondition	1.3.6.1.4.1.4526.4.5.5.3.2	INTEGER	read-write	This attribute shall indicate WPA group key update condition.
INT wpaGroupKeyUpdateIntervalSecond	1.3.6.1.4.1.4526.4.5.5.3.3	INTEGER	read-write	This fields indicates the wpa keyupdate sec interval.
radiusAccountPrimaryServer	1.3.6.1.4.1.4526.4.5.5.4
IP radiusAccountPrimaryServerIP	1.3.6.1.4.1.4526.4.5.5.4.1	IpAddress	read-write	This field shall indicate the primary account RADIUS server IP address.
INT radiusAccountPrimaryServerPort	1.3.6.1.4.1.4526.4.5.5.4.2	INTEGER	read-write	This field shall indicate the primary account RADIUS server port number. Default: 1813.
STR radiusAccountPrimaryServerSecret	1.3.6.1.4.1.4526.4.5.5.4.3	DisplayString	read-write	This field shall indicate the primary account RADIUS server shared secret string.
radiusAccountSecondaryServer	1.3.6.1.4.1.4526.4.5.5.5
IP radiusAccountSecondaryServerIP	1.3.6.1.4.1.4526.4.5.5.5.1	IpAddress	read-write	This field shall indicate the secondary account RADIUS server IP address.
INT radiusAccountSecondaryServerPort	1.3.6.1.4.1.4526.4.5.5.5.2	INTEGER	read-write	This field shall indicate the secondary account RADIUS server port number. Default: 1813.
STR radiusAccountSecondaryServerSecret	1.3.6.1.4.1.4526.4.5.5.5.3	DisplayString	read-write	This field shall indicate the secondary account RADIUS server shared secret string.
hotspotSettings	1.3.6.1.4.1.4526.4.5.6
T/F httpRedirectEnable	1.3.6.1.4.1.4526.4.5.6.1	TruthValue	read-write	This attribute shall indicate whether the HTTP redirect is enabled.
STR httpRedirectUrl	1.3.6.1.4.1.4526.4.5.6.2	DisplayString	read-write	This attribute shall indicate http redirect URL.
syslogSettings	1.3.6.1.4.1.4526.4.5.7
T/F syslogEnable	1.3.6.1.4.1.4526.4.5.7.1	TruthValue	read-write	This attribute shall indicate whether the syslog is enabled.
IP syslogServerIP	1.3.6.1.4.1.4526.4.5.7.2	IpAddress	read-write	This attributes shall indicates the IP address of the syslog server. ***The value can only be set to an IP address in dot format.
INT syslogServerPort	1.3.6.1.4.1.4526.4.5.7.3	INTEGER	read-write	This attributes shall indicates the Port of the Syslog server.
remoteMgmtSettings	1.3.6.1.4.1.4526.4.5.8
T/F snmpEnable	1.3.6.1.4.1.4526.4.5.8.1	TruthValue	read-write	This attribute shall indicate whether the SNMP agent is enabled.
IP snmpManageIP	1.3.6.1.4.1.4526.4.5.8.2	IpAddress	read-write	The field indicates the SNMP manage IP address. ***The value can only be set to an IP address in dot format.
IP snmpTrapServerIP	1.3.6.1.4.1.4526.4.5.8.3	IpAddress	read-write	The field indicates the SNMP trap server IP address. ***The value can only be set to an IP address in dot format.
STR snmpReadCommunity	1.3.6.1.4.1.4526.4.5.8.4	DisplayString	read-write	The field indicates the SNMP read only community name. ***The value can only be set to 1 to 32 readable string.
STR snmpWriteCommunity	1.3.6.1.4.1.4526.4.5.8.5	DisplayString	read-write	The field indicates the SNMP read write community name. ***The value can only be set to 1 to 32 readable string.
auxCommand	1.3.6.1.4.1.4526.4.5.9
T/F resetAP	1.3.6.1.4.1.4526.4.5.9.1	TruthValue	read-write	This a command field for conntrol AP action. Write any value to reset the AP.
T/F resetToFactoryDefault	1.3.6.1.4.1.4526.4.5.9.2	TruthValue	read-write	This a command field for conntrol AP action. Write any value to reset the Access Point to the original factory default settings.

RFC description

NETGEAR wireless access point MIB for 802.11a/b/g ProSafe AP system configuration and management.

Start monitoring NETGEAR WAG102 wireless access point (radio/RF statistics and client-association status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WAG102

What Is WAG102?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description