WAG302 :: gatewayAddr

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WAG302 › gatewayAddr

gatewayAddr

Module: WAG302

OID (symbolic): WAG302::gatewayAddr

OID (numeric): 1.3.6.1.4.1.4526.4.7.1.10

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: The field indicates the gateway of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same gateway address,when worked in bridge mode.

What is gatewayAddr?

Default gateway IP address the AP uses when operating in router or router/bridge mode; get this wrong and the AP (and anything behind it) loses reachability to networks outside the local subnet.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.4.7.1.10
snmpwalk -v2c -c public <target> WAG302::gatewayAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.4.7.1.10.1
snmpget -v2c -c public <target> WAG302::gatewayAddr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.4.7.1.10.1 a <value>

Start monitoring NETGEAR ProSafe WAG302 wireless access point (radio operational status/client-association count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WAG302::gatewayAddr OID value, configure state conditions and alerts, and monitor any NETGEAR ProSafe WAG302 wireless access point (radio operational status/client-association count status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4526netgearFSM726S-MIB
1.3.6.1.4.1.4526.4wirelessProductsNETGEAR-ME-MIB
1.3.6.1.4.1.4526.4.7wag302v2QUANTA-LB6M-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4526.4.7.1lanSettingsWAG302
1.3.6.1.4.1.4526.4.7.1.10gatewayAddrWAG302