All MIBs › VRTS-SNMP-MIBv1
Category: Storage and NAS, Web and Application Services
Description: Provides Veritas SNMP management objects for monitoring storage and backup software components and job status.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is VRTS-SNMP-MIBv1?
VRTS-SNMP-MIBv1 is Veritas's (NetBackup/VxVM) SNMP module for monitoring enterprise backup and storage management software, covering tape media inventory, backup media/pool status, and top-level branches for the broader NetBackup and Veritas Volume Manager product areas. It exposes data about physical/virtual backup media — tape cartridges, robotic tape libraries, and media pools. In monitoring terms it is used to track both the software and hardware status of backup infrastructure: which media are loaded in which robot slot, media retention levels, and tape sizes, letting an admin verify backup job media availability and detect tape library hardware issues such as a jammed or mis-slotted cartridge. It is a vendor-specific extension built on standard SNMP SMI conventions rather than one of the IETF host/storage MIBs, though it can be deployed alongside standard host-resources MIBs for fuller system visibility. It is typically deployed in enterprise data centers running Veritas/NetBackup backup servers with attached tape robotic libraries. Network engineers evaluating or troubleshooting this functionality can download the VRTS-SNMP-MIBv1 file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in VRTS-SNMP-MIBv1. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Veritas NetBackup backup server
- tape robotic library/media changer used with NetBackup
Monitoring Examples
Polling mediaTable (mediaEntry indexed by mediaIndex) and inspecting mediaPool, mediaId, and mediaType lets an admin confirm which tape cartridges are assigned to which backup pool and catch a media type mismatch. mediaRobotType, mediaRobotNum, and mediaRobotSlot identify exactly where a given tape sits within a robotic tape library, useful for diagnosing a mis-slotted or stuck cartridge. mediaRetLevel and mediaSize expose retention-level and capacity data so an operator can spot media nearing end-of-retention or an undersized tape causing backup job failures.
What Can Be Monitored
- tape media pool assignment
- media/tape identifier and type
- robot number and slot location
- media retention level
- tape/media size/capacity
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| DisplayString |
From SNMPv2-SMI
| Integer32 |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| veritas | 1.3.6.1.4.1.1035 | |||
| netbackup | 1.3.6.1.4.1.1035.1 | |||
| job | 1.3.6.1.4.1.1035.1.1 | |||
| jobTable | 1.3.6.1.4.1.1035.1.1.1 | not-accessible | A table of NetBackup jobs information. | |
| jobEntry | 1.3.6.1.4.1.1035.1.1.1.1 | not-accessible | An NBU job entry containing a job related information. | |
| I32 jobIndex | 1.3.6.1.4.1.1035.1.1.1.1.1 | Integer32 | read-only | It is the standard index for SNMP job table, the actual NetBackup job id is represented by jobId field. |
| STR jobType | 1.3.6.1.4.1.1035.1.1.1.1.2 | DisplayString | read-only | The Backup type of NetBackup job, eg Backup or Restore etc. |
| STR jobState | 1.3.6.1.4.1.1035.1.1.1.1.3 | DisplayString | read-only | The State of NetBackup job, eg Done or Active etc. |
| STR jobClass | 1.3.6.1.4.1.1035.1.1.1.1.4 | DisplayString | read-only | The Class of NetBackup job. |
| STR jobClient | 1.3.6.1.4.1.1035.1.1.1.1.5 | DisplayString | read-only | The Client name of NetBackup job. |
| STR jobSched | 1.3.6.1.4.1.1035.1.1.1.1.6 | DisplayString | read-only | The Backup type of NetBackup job, eg Backup or Restore etc. |
| STR jobSchedType | 1.3.6.1.4.1.1035.1.1.1.1.7 | DisplayString | read-only | The Backup type of NetBackup job, eg Backup or Restore etc. |
| STR jobStu | 1.3.6.1.4.1.1035.1.1.1.1.8 | DisplayString | read-only | The Backup storage unit name of NetBackup job. |
| STR jobVolpool | 1.3.6.1.4.1.1035.1.1.1.1.9 | DisplayString | read-only | The Backup volume pool name of NetBackup job. |
| I32 jobKbytes | 1.3.6.1.4.1.1035.1.1.1.1.10 | Integer32 | read-only | The Backup Kilo-bytes information of NetBackup job. |
| STR jobMaster | 1.3.6.1.4.1.1035.1.1.1.1.11 | DisplayString | read-only | The master server hostname of NetBackup job. |
| STR jobErrExpl | 1.3.6.1.4.1.1035.1.1.1.1.12 | DisplayString | read-only | The error message explanation of NetBackup job. |
| STR jobErrReco | 1.3.6.1.4.1.1035.1.1.1.1.13 | DisplayString | read-only | The recommended action to correct error of NetBackup job. |
| I32 jobId | 1.3.6.1.4.1.1035.1.1.1.1.14 | Integer32 | read-only | It is job Id for each NetBackup job, also served as Reference Index . |
| I32 jobErrCode | 1.3.6.1.4.1.1035.1.1.1.1.100 | Integer32 | read-only | It is job exit status code for the NetBackup job. 0 means no error. |
| STR jobErrMsg | 1.3.6.1.4.1.1035.1.1.1.1.101 | DisplayString | read-only | The backup job error message of the NetBackup job. |
| I32 jobErrFix | 1.3.6.1.4.1.1035.1.1.1.1.102 | Integer32 | read-write | Setting this error fix flag to 1 to kick off the jobErrFixCmd. |
| STR jobErrFixCmd | 1.3.6.1.4.1.1035.1.1.1.1.103 | DisplayString | read-write | The command that gets run when the jobErrFix column is set to 1. |
| vrtsNbuJobEvent | 1.3.6.1.4.1.1035.1.1.251 | |||
| NTF abnormalJobEvent | 1.3.6.1.4.1.1035.1.1.251.0.1 | The NetBackup job failed with error. Detailed job, error and corrective action information can be found from the objects associated with this event. | ||
| NTF normalJobEvent | 1.3.6.1.4.1.1035.1.1.251.0.2 | The NetBackup job finished successfully. Detailed job information can be found from the objects associated with this event. | ||
| config | 1.3.6.1.4.1.1035.1.2 | |||
| _pysmi_class | 1.3.6.1.4.1.1035.1.2.2 | |||
| classTable | 1.3.6.1.4.1.1035.1.2.2.1 | not-accessible | A table of NetBackup class configuration information. | |
| classEntry | 1.3.6.1.4.1.1035.1.2.2.1.1 | not-accessible | An NBU class entry containing a class related information. | |
| I32 classIndex | 1.3.6.1.4.1.1035.1.2.2.1.1.1 | Integer32 | read-only | It is Reference Index for class table. |
| STR className | 1.3.6.1.4.1.1035.1.2.2.1.1.2 | DisplayString | read-only | The class name. |
| client | 1.3.6.1.4.1.1035.1.2.4 | |||
| clientTable | 1.3.6.1.4.1.1035.1.2.4.1 | not-accessible | A table of NetBackup client configuration information. | |
| clientEntry | 1.3.6.1.4.1.1035.1.2.4.1.1 | not-accessible | An NBU client entry containing a client related information. | |
| I32 clientIndex | 1.3.6.1.4.1.1035.1.2.4.1.1.1 | Integer32 | read-only | It is Reference Index for client table. |
| STR clientName | 1.3.6.1.4.1.1035.1.2.4.1.1.2 | DisplayString | read-only | The client name. |
| sched | 1.3.6.1.4.1.1035.1.2.6 | |||
| schedTable | 1.3.6.1.4.1.1035.1.2.6.1 | not-accessible | A table of NetBackup sched configuration information. | |
| schedEntry | 1.3.6.1.4.1.1035.1.2.6.1.1 | not-accessible | An NBU sched entry containing a sched related information. | |
| I32 schedIndex | 1.3.6.1.4.1.1035.1.2.6.1.1.1 | Integer32 | read-only | It is Reference Index for sched table. |
| STR schedName | 1.3.6.1.4.1.1035.1.2.6.1.1.2 | DisplayString | read-only | The sched name. |
| stu | 1.3.6.1.4.1.1035.1.2.8 | |||
| stuTable | 1.3.6.1.4.1.1035.1.2.8.1 | not-accessible | A table of NetBackup stu configuration information. | |
| stuEntry | 1.3.6.1.4.1.1035.1.2.8.1.1 | not-accessible | An NBU stu entry containing a stu related information. | |
| I32 stuIndex | 1.3.6.1.4.1.1035.1.2.8.1.1.1 | Integer32 | read-only | It is Reference Index for stu table. |
| STR stuName | 1.3.6.1.4.1.1035.1.2.8.1.1.2 | DisplayString | read-only | The stu name. |
| media | 1.3.6.1.4.1.1035.1.4 | |||
| mediaTable | 1.3.6.1.4.1.1035.1.4.1 | not-accessible | A table of NetBackup media configuration information. | |
| mediaEntry | 1.3.6.1.4.1.1035.1.4.1.1 | not-accessible | An NBU media entry containing a media related information. | |
| I32 mediaIndex | 1.3.6.1.4.1.1035.1.4.1.1.1 | Integer32 | read-only | It is Reference Index for media table. |
| STR mediaPool | 1.3.6.1.4.1.1035.1.4.1.1.2 | DisplayString | read-only | The volume pool name where the media belongs to. |
| STR mediaId | 1.3.6.1.4.1.1035.1.4.1.1.3 | DisplayString | read-only | It is media id for media table. |
| STR mediaType | 1.3.6.1.4.1.1035.1.4.1.1.4 | DisplayString | read-only | The type of the media, 8MM etc. |
| STR mediaRobotType | 1.3.6.1.4.1.1035.1.4.1.1.5 | DisplayString | read-only | The type of the robot where the media resides, TS8 etc. |
| I32 mediaRobotNum | 1.3.6.1.4.1.1035.1.4.1.1.6 | Integer32 | read-only | It is robot number where the media resides. |
| I32 mediaRobotSlot | 1.3.6.1.4.1.1035.1.4.1.1.7 | Integer32 | read-only | It is robot slot number where the media resides. |
| STR mediaSideFace | 1.3.6.1.4.1.1035.1.4.1.1.8 | DisplayString | read-only | It is the robot face where the media resides. |
| I32 mediaRetLevel | 1.3.6.1.4.1.1035.1.4.1.1.9 | Integer32 | read-only | It is the retention level of the media. |
| I32 mediaSize | 1.3.6.1.4.1.1035.1.4.1.1.10 | Integer32 | read-only | It is media size in kbytes. |
| STR mediaStatus | 1.3.6.1.4.1.1035.1.4.1.1.11 | DisplayString | read-only | It is the status of the media eg, available, frozen, full etc. |
| volpool | 1.3.6.1.4.1.1035.1.4.2 | |||
| volpoolTable | 1.3.6.1.4.1.1035.1.4.2.1 | not-accessible | A table of NetBackup volpool configuration information. | |
| volpoolEntry | 1.3.6.1.4.1.1035.1.4.2.1.1 | not-accessible | An NBU volpool entry containing a volpool related information. | |
| I32 volpoolIndex | 1.3.6.1.4.1.1035.1.4.2.1.1.1 | Integer32 | read-only | It is Reference Index for volpool table. |
| STR volpoolName | 1.3.6.1.4.1.1035.1.4.2.1.1.2 | DisplayString | read-only | The volpool name. |
| robot | 1.3.6.1.4.1.1035.1.4.4 | |||
| robotTable | 1.3.6.1.4.1.1035.1.4.4.1 | not-accessible | A table of NetBackup robot configuration information. | |
| robotEntry | 1.3.6.1.4.1.1035.1.4.4.1.1 | not-accessible | An NBU robot entry containing a robot related information. | |
| I32 robotIndex | 1.3.6.1.4.1.1035.1.4.4.1.1.1 | Integer32 | read-only | It is Reference Index for robot table. |
| STR robotName | 1.3.6.1.4.1.1035.1.4.4.1.1.2 | DisplayString | read-only | The robot name. |
| drive | 1.3.6.1.4.1.1035.1.4.6 | |||
| driveTable | 1.3.6.1.4.1.1035.1.4.6.1 | not-accessible | A table of NetBackup drive configuration information. | |
| driveEntry | 1.3.6.1.4.1.1035.1.4.6.1.1 | not-accessible | An NBU drive entry containing a drive related information. | |
| I32 driveIndex | 1.3.6.1.4.1.1035.1.4.6.1.1.1 | Integer32 | read-only | It is Reference Index for drive table. |
| STR driveName | 1.3.6.1.4.1.1035.1.4.6.1.1.2 | DisplayString | read-only | The drive name. |
| tape | 1.3.6.1.4.1.1035.1.4.8 | |||
| tapeTable | 1.3.6.1.4.1.1035.1.4.8.1 | not-accessible | A table of NetBackup tape configuration information. | |
| tapeEntry | 1.3.6.1.4.1.1035.1.4.8.1.1 | not-accessible | An NBU tape entry containing a tape related information. | |
| I32 tapeIndex | 1.3.6.1.4.1.1035.1.4.8.1.1.1 | Integer32 | read-only | It is Reference Index for tape table. |
| STR tapeName | 1.3.6.1.4.1.1035.1.4.8.1.1.2 | DisplayString | read-only | The tape name. |
| dr | 1.3.6.1.4.1.1035.1.6 | |||
| vault | 1.3.6.1.4.1.1035.1.6.2 | |||
| vaultTable | 1.3.6.1.4.1.1035.1.6.2.1 | not-accessible | A table of NetBackup vault configuration information. | |
| vaultEntry | 1.3.6.1.4.1.1035.1.6.2.1.1 | not-accessible | An NBU vault entry containing a vault related information. | |
| I32 vaultIndex | 1.3.6.1.4.1.1035.1.6.2.1.1.1 | Integer32 | read-only | It is Reference Index for vault table. |
| STR vaultName | 1.3.6.1.4.1.1035.1.6.2.1.1.2 | DisplayString | read-only | The vault name. |
| nbuExtTable | 1.3.6.1.4.1.1035.1.100 | not-accessible | A table of extensible commands to control NetBackup from SNMP framework via SNMP get and set protocol. The commands can start and stop NetBackup/Media Manager, start and kill backup jobs etc. These commands map can be configured in ENE agent's snmpd.conf file. | |
| nbuEntry | 1.3.6.1.4.1.1035.1.100.1 | not-accessible | An NBU entry containing an extensible modules and the results. | |
| OPE nbuIndex | 1.3.6.1.4.1.1035.1.100.1.1 | OpEnum | read-only | Reference Index for extensible NBU scripts. It is an integer row number. A predefined map is available in snmpd.conf to map and customize the map from index to the command. |
| STR nbuNames | 1.3.6.1.4.1.1035.1.100.1.2 | DisplayString | read-write | A description of the extensible NBU command. |
| STR nbuCommand | 1.3.6.1.4.1.1035.1.100.1.3 | DisplayString | read-write | The NBU command or scripts to be executed. |
| I32 nbuCtlFlag | 1.3.6.1.4.1.1035.1.100.1.4 | Integer32 | read-write | When the flag is set to 1, the extensible NBU scripts in nbuCommand will be executed. Exit code will go to nbuResult, output go to nbuOutput. |
| STR nbuResFile | 1.3.6.1.4.1.1035.1.100.1.5 | DisplayString | read-only | The result file path for excuting the nbuCommand scripts. It contains the exit status of the command in the first line. The stdout in the second line. So the Agent can pick it up after executing the command and set exit code to nbuResult, output go to nbuOutput. |
| STR nbuLockFile | 1.3.6.1.4.1.1035.1.100.1.6 | DisplayString | read-only | The lock file path during excuting the nbuCommand scripts. Its presence indicate the nbuCommand is still in execution. |
| I32 nbuTimeout | 1.3.6.1.4.1.1035.1.100.1.7 | Integer32 | read-only | The timeout before waiting for result of the executed NBU command. |
| I32 nbuFreq | 1.3.6.1.4.1.1035.1.100.1.8 | Integer32 | read-only | The result checking frequency during waiting of the executed NBU command. |
| I32 nbuResult | 1.3.6.1.4.1.1035.1.100.1.100 | Integer32 | read-only | The exit status of the executed NBU command. |
| STR nbuOutput | 1.3.6.1.4.1.1035.1.100.1.101 | DisplayString | read-only | The firstline output of the executed NBU command. |
| I32 nbuErrFix | 1.3.6.1.4.1.1035.1.100.1.102 | Integer32 | read-write | Setting this error fix flag to 1 to kick off the nbuErrFixCmd. |
| STR nbuErrFixCmd | 1.3.6.1.4.1.1035.1.100.1.103 | DisplayString | read-only | The NBU command that gets run when the nbuErrFix column is set to 1. |
| vrtsNbuExtEvent | 1.3.6.1.4.1.1035.1.101 | |||
| NTF nbuExtEvent | 1.3.6.1.4.1.1035.1.101.0.1 | The NetBackup extensiable script execution result notificaiton with given exit status and output. | ||
| nbuTrapVars | 1.3.6.1.4.1.1035.1.250 | |||
| STR nbuHost | 1.3.6.1.4.1.1035.1.250.1 | DisplayString | read-only | The hostname where NetBackup error event happened. |
| I32 nbuErrcode | 1.3.6.1.4.1.1035.1.250.100 | Integer32 | read-only | The error code of NetBackup error. 0 means no error. |
| STR nbuErrmsg | 1.3.6.1.4.1.1035.1.250.101 | DisplayString | read-only | The error message of NetBackup error. |
| vrtsNbuEvents | 1.3.6.1.4.1.1035.1.251 | |||
| NTF dbBackupFailed | 1.3.6.1.4.1.1035.1.251.0.300 | Description: The backup of the NB database failed. Resolution: Investigate why the NB database backup failed. Usually the All Log Entries Report will give you some idea as to why this failed. | ||
| NTF dbBackupIsDisabled | 1.3.6.1.4.1.1035.1.251.0.301 | Description: Backup of the NetBackup database is mandatoryly disabled. Resolution: No Immediate action is required. Periodically NetBackup will disable the ability to perform a NBU database backup while it is performing house-cleaning activities. Should the NB database backup be disabled for an extended period time, review the All Log Entries report to help determine why. | ||
| NTF freezingMedia | 1.3.6.1.4.1.1035.1.251.0.302 | Description: NetBackup has issued a 'freezing media' message. Resolution: A piece of media (tape or optical) has been frozen either manually by an administrator or automatically by NetBackup. NetBackup will freeze media that has been previously written in another tape format (tar, ANSI,). NetBackup, by default will not overwrite these tapes unless a bp.conf entry to ALLOW_MEDIA_OVERWRITE is added, see the NetBackup Administrators Guide. Also investigate the All log Entries report and bptm logs for more information. | ||
| NTF suspendingMedia | 1.3.6.1.4.1.1035.1.251.0.303 | Description: NetBackup has issued a 'suspending media' message. Resolution: NetBackup tried to use the identified media but had problems reading or writing to the tape. Investigate the cause through the All Log Entries report and / or bptm log. | ||
| NTF mediaRequiredForRestore | 1.3.6.1.4.1.1035.1.251.0.304 | Description: Media is needed for an NBU restore operation. The event is sent via a user alarm in the action script. Resolution: The media identified is required for a restore that has been initiated. The media id is also identified in the Device Management Window. Locate the required tape, place it in the library or tape drive and satisfy the tape mount request through the Device Manager window. You may also deny the request through the Device Manager window. | ||
| NTF downedDrive | 1.3.6.1.4.1.1035.1.251.0.305 | Description: The operator or Media Manager has downed a drive. Resolution: A tape drive is suspected of having problems. Investigate the All Log Entries report, bptm log, Operating System messages log (/var/adm/messages) to determine the cause. NetBackup may down a drive when having trouble reading a tape, if the tape is used in another drive and also has problems then the tape is suspended and the original downed drive is automatically brough up. | ||
| NTF exceededCleaningFrequency | 1.3.6.1.4.1.1035.1.251.0.306 | Description: A drive has exceeded its cleaning frequency. Resolution: This should not normally occur with most TLD devices such as with STK Silo's and DLT tape drives, which automatically handle cleanings. This error message only occurs when NetBackup is handling tape cleanings manually. | ||
| NTF exceededMaxMounts | 1.3.6.1.4.1.1035.1.251.0.307 | Description: A media has exceeded its maximum number of mounts. Resolution: When the media was added to NetBackups' Media Manager, a maximum number of mounts was assigned. The media has reached this limit which normally signals that it should be retired and replaced with another piece of media. Data on the tape is still tracked on the tape and expires once the retention period of the image has passed. | ||
| NTF mountRequest | 1.3.6.1.4.1.1035.1.251.0.308 | Description: A mount request is posted to the system log for a non-robotic device. It may be either for the mount itself or because the media needs 'write enabled'. Resolution: This message will also be displayed in the Device Manager window. Place the tape in the required non-robotic drive and satisfy the request through the Device Manager window. Deny the request through the Device Manager window. Or remove the media from the tape drive, write enable it and return it to the tape drive. This message is normally issued for tape drives under Operator control rather than AVR or Robotic control. | ||
| NTF noCleaningTape | 1.3.6.1.4.1.1035.1.251.0.309 | Description: There is no cleaning tape or the cleaning tape is used up. Resolution: This message only occurs when NetBackup is handling tape drive cleanings and should not normally occur with most TLD devices. | ||
| NTF zeroCleaningsLeft | 1.3.6.1.4.1.1035.1.251.0.310 | Description: The cleaning tape has no cleanings left. Resolution: This message only occurs when NetBackup is handling tape drive cleanings and the cleaning tape(s) have been used to their capacity. This should not normally occur with most TLD devices. | ||
| vxvm | 1.3.6.1.4.1.1035.2 | |||
| vmExtTable | 1.3.6.1.4.1.1035.2.100 | not-accessible | A table of extensible commands to control VxVM from SNMP framework via SNMP get and set protocol. These commands can be configured in ENE agent's snmpd.conf file. | |
| vmEntry | 1.3.6.1.4.1.1035.2.100.1 | not-accessible | A VM entry containing an extensible modules and the results. | |
| I32 vmIndex | 1.3.6.1.4.1.1035.2.100.1.1 | Integer32 | read-only | Reference Index for extensible VM scripts. It is an integer row number. A predefined map is available in snmpd.conf to map the index to the command. |
| STR vmNames | 1.3.6.1.4.1.1035.2.100.1.2 | DisplayString | read-write | A description of the extensible VM command. |
| STR vmCommand | 1.3.6.1.4.1.1035.2.100.1.3 | DisplayString | read-write | A valid VM script path to be executed when vmCtlFlag is set to 1. |
| I32 vmCtlFlag | 1.3.6.1.4.1.1035.2.100.1.4 | Integer32 | read-write | When the flag is set to 1, the extensible VM scripts in vmCommand will be executed. Exit code will go to vmResult, output go to vmOutput. |
| I32 vmResult | 1.3.6.1.4.1.1035.2.100.1.100 | Integer32 | read-only | The exit status of the executed VM command. |
| STR vmOutput | 1.3.6.1.4.1.1035.2.100.1.101 | DisplayString | read-only | The firstline output of the executed VM command. |
| I32 vmErrFix | 1.3.6.1.4.1.1035.2.100.1.102 | Integer32 | read-write | Setting this error fix flag to 1 to kick off the vmErrFixCmd. |
| STR vmErrFixCmd | 1.3.6.1.4.1.1035.2.100.1.103 | DisplayString | read-only | The VM command that gets run when the vmErrFix column is set to 1. |
| vxvmEventAttrs | 1.3.6.1.4.1.1035.2.250 | |||
| STR vxvmHost | 1.3.6.1.4.1.1035.2.250.1 | DisplayString | read-only | The host name where the event occured. |
| STR vxvmType | 1.3.6.1.4.1.1035.2.250.2 | DisplayString | read-only | The event category: vxio, vxconfigd, vxdmp, vxdmpadm etc. |
| STR vxvmSeverity | 1.3.6.1.4.1.1035.2.250.3 | DisplayString | read-only | The severity of the event occured. Possible values are Critical, Major, Minor, Warning and Normal. |
| STR vxvmErrExpl | 1.3.6.1.4.1.1035.2.250.98 | DisplayString | read-only | The error explanation. |
| STR vxvmErrReco | 1.3.6.1.4.1.1035.2.250.99 | DisplayString | read-only | The recommended action to correct VXVM error. |
| I32 vxvmErrCode | 1.3.6.1.4.1.1035.2.250.100 | Integer32 | read-only | The error code of the event. |
| STR vxvmErrMsg | 1.3.6.1.4.1.1035.2.250.101 | DisplayString | read-only | The detailed error message of the event. |
| vrtsVxvmEvent | 1.3.6.1.4.1.1035.2.251 | |||
| NTF errorVxvmEvent | 1.3.6.1.4.1.1035.2.251.0.1 | The VXVM error event. Detailed error and corrective action information can be found from the objects associated with this event. | ||
| NTF normalVxvmEvent | 1.3.6.1.4.1.1035.2.251.0.2 | The normal VXVM event. Detailed event information can be found from the objects associated with this event. | ||
| vxfs | 1.3.6.1.4.1.1035.3 | |||
| fsExtTable | 1.3.6.1.4.1.1035.3.100 | not-accessible | A table of extensible commands to control VxFS from SNMP framework via SNMP get and set protocol. These commands can be configured in ENE agent's snmpd.conf file. | |
| fsEntry | 1.3.6.1.4.1.1035.3.100.1 | not-accessible | A FS entry containing an extensible modules and the results. | |
| I32 fsIndex | 1.3.6.1.4.1.1035.3.100.1.1 | Integer32 | read-only | Reference Index for extensible FS scripts. It is an integer row number. A predefined map is available in snmpd.conf to map the index to the command. |
| STR fsNames | 1.3.6.1.4.1.1035.3.100.1.2 | DisplayString | read-write | A description of the extensible FS command. |
| STR fsCommand | 1.3.6.1.4.1.1035.3.100.1.3 | DisplayString | read-write | A valid FS script path to be executed when fsCtlFlag is set to 1. |
| I32 fsCtlFlag | 1.3.6.1.4.1.1035.3.100.1.4 | Integer32 | read-write | When the flag is set to 1, the extensible FS scripts in fsCommand will be executed. Exit code will go to fsResult, output go to fsOutput. |
| I32 fsResult | 1.3.6.1.4.1.1035.3.100.1.100 | Integer32 | read-only | The exit status of the executed FS command. |
| STR fsOutput | 1.3.6.1.4.1.1035.3.100.1.101 | DisplayString | read-only | The firstline output of the executed FS command. |
| I32 fsErrFix | 1.3.6.1.4.1.1035.3.100.1.102 | Integer32 | read-write | Setting this error fix flag to 1 to kick off the fsErrFixCmd. |
| STR fsErrFixCmd | 1.3.6.1.4.1.1035.3.100.1.103 | DisplayString | read-only | The FS command that gets run when the fsErrFix column is set to 1. |
| vxfsEventAttrs | 1.3.6.1.4.1.1035.3.250 | |||
| STR vxfsHost | 1.3.6.1.4.1.1035.3.250.1 | DisplayString | read-only | The host name where the event occured. |
| I32 vxfsMsgcnt | 1.3.6.1.4.1.1035.3.250.2 | Integer32 | read-only | The event count for sequence purpose. |
| STR vxfsSeverity | 1.3.6.1.4.1.1035.3.250.3 | DisplayString | read-only | The severity of the event occured. Possible values are Critical, Major, Minor, Warning and Normal. |
| STR vxfsErrExpl | 1.3.6.1.4.1.1035.3.250.98 | DisplayString | read-only | The error explanation. |
| STR vxfsErrReco | 1.3.6.1.4.1.1035.3.250.99 | DisplayString | read-only | The recommended action to correct VXFS error. |
| I32 vxfsErrCode | 1.3.6.1.4.1.1035.3.250.100 | Integer32 | read-only | The error code of the event. |
| STR vxfsErrMsg | 1.3.6.1.4.1.1035.3.250.101 | DisplayString | read-only | The detailed error message of the event. |
| vrtsVxfsEvent | 1.3.6.1.4.1.1035.3.251 | |||
| NTF errorVxfsEvent | 1.3.6.1.4.1.1035.3.251.0.1 | The VXFS error event. Detailed error and corrective action information can be found from the objects associated with this event. | ||
| NTF normalVxfsEvent | 1.3.6.1.4.1.1035.3.251.0.2 | The normal VXFS event. Detailed event information can be found from the objects associated with this event. | ||
| vcs | 1.3.6.1.4.1.1035.7 | |||
| vcsExtTable | 1.3.6.1.4.1.1035.7.100 | not-accessible | A table of extensible commands to control VCS from SNMP framework via SNMP get and set protocol. The commands can start and stop VCS and its components, start and kill services, bring resource online and offline etc. These commands can be configured in ENE agent's snmpd.conf file. | |
| vcsEntry | 1.3.6.1.4.1.1035.7.100.1 | not-accessible | An VCS entry containing an extensible modules and the results. | |
| I32 vcsIndex | 1.3.6.1.4.1.1035.7.100.1.1 | Integer32 | read-only | Reference Index for extensible VCS scripts. It is an integer row number. |
| STR vcsNames | 1.3.6.1.4.1.1035.7.100.1.2 | DisplayString | read-only | A description of the extensible VCS command. |
| STR vcsCommand | 1.3.6.1.4.1.1035.7.100.1.3 | DisplayString | read-only | The VCS command or scripts to be executed. |
| I32 vcsCtlFlag | 1.3.6.1.4.1.1035.7.100.1.4 | Integer32 | read-write | When the flag is set to 1, the extensible VCS scripts in vcsCommand will be executed. Exit code will go to vcsResult, output go to vcsOutput. |
| I32 vcsResult | 1.3.6.1.4.1.1035.7.100.1.100 | Integer32 | read-only | The exit status of the executed VCS command. |
| STR vcsOutput | 1.3.6.1.4.1.1035.7.100.1.101 | DisplayString | read-only | The firstlinw output of the executed VCS command. |
| I32 vcsErrFix | 1.3.6.1.4.1.1035.7.100.1.102 | Integer32 | read-write | Setting this error fix flag to 1 to kick off the vcsErrFixCmd. |
| STR vcsErrFixCmd | 1.3.6.1.4.1.1035.7.100.1.103 | DisplayString | read-only | The VCS command that gets run when the vcsErrFix column is set to 1. |
| vcsEventAttrs | 1.3.6.1.4.1.1035.7.250 | |||
| STR vcsTag | 1.3.6.1.4.1.1035.7.250.1 | DisplayString | read-only | A Tag describe the severity of the event: TAG_A: VCS internal message. Contact Customer Support. TAG_B: Messages indicating errors and exceptions. TAG_C: Messages indicating warnings. TAG_D: Messages indicating normal operations. TAG_E: Messages from agents indicating status, etc. |
| STR vcsHost | 1.3.6.1.4.1.1035.7.250.2 | DisplayString | read-only | The host name where the event occured. |
| STR vcsRes | 1.3.6.1.4.1.1035.7.250.3 | DisplayString | read-only | The event related resource name. |
| STR vcsResStat | 1.3.6.1.4.1.1035.7.250.4 | DisplayString | read-only | The state of the resource: online or offline. |
| STR vcsAgent | 1.3.6.1.4.1.1035.7.250.5 | DisplayString | read-only | The event related Agent name. |
| STR vcsNode | 1.3.6.1.4.1.1035.7.250.6 | DisplayString | read-only | The event related node name. |
| STR vcsDate | 1.3.6.1.4.1.1035.7.250.7 | DisplayString | read-only | The date when event occur. |
| STR vcsTime | 1.3.6.1.4.1.1035.7.250.8 | DisplayString | read-only | The time when event occur. |
| STR vcsErrExpl | 1.3.6.1.4.1.1035.7.250.98 | DisplayString | read-only | The error explanation. |
| STR vcsErrReco | 1.3.6.1.4.1.1035.7.250.99 | DisplayString | read-only | The recommended action to correct VCS error. |
| I32 vcsErrCode | 1.3.6.1.4.1.1035.7.250.100 | Integer32 | read-only | The error code of the event. |
| STR vcsErrMsg | 1.3.6.1.4.1.1035.7.250.101 | DisplayString | read-only | The detailed error message of the event. |
| vrtsVcsEvent | 1.3.6.1.4.1.1035.7.251 | |||
| NTF errorVcsEvent | 1.3.6.1.4.1.1035.7.251.0.1 | The VCS error event with TAG_A, TAG_B and TAG_C. Detailed error and corrective action information can be found from the objects associated with this event. | ||
| NTF normalVcsEvent | 1.3.6.1.4.1.1035.7.251.0.2 | The normal VCS event with TAG_D, TAG_E. Detailed event information can be found from the objects associated with this event. | ||
| commonObjects | 1.3.6.1.4.1.1035.301 | |||
| log | 1.3.6.1.4.1.1035.301.1 | |||
| logTable | 1.3.6.1.4.1.1035.301.1.1 | not-accessible | A table of error log and error message based event management information configured in the logfile.conf and messages.conf of the ENE SNMP agent. | |
| logEntry | 1.3.6.1.4.1.1035.301.1.1.1 | not-accessible | An log entry containing a log monitoring related information. | |
| I32 logIndex | 1.3.6.1.4.1.1035.301.1.1.1.1 | Integer32 | read-only | It is the unique index of error log and message to be monitored. |
| STR logHost | 1.3.6.1.4.1.1035.301.1.1.1.2 | DisplayString | read-only | The hostname where log error event happened. |
| I32 logPrdCode | 1.3.6.1.4.1.1035.301.1.1.1.3 | Integer32 | read-only | The VERITAS product code of which the error log event is associated, it can be 0: NetBackup, 1: VxVM, 2: VxFS, 7: VCS etc. |
| STR logPrdName | 1.3.6.1.4.1.1035.301.1.1.1.4 | DisplayString | read-only | The VERITAS product name of which the error log event is associated, it can be NetBackup, VxVM, VxFS, VCS etc. |
| STR logObjName | 1.3.6.1.4.1.1035.301.1.1.1.5 | DisplayString | read-only | The object name of which the error log event is associated. For example, it can be NetBackup job, tape drive, or VxVM's subdisk, or VCS's service etc. |
| STR logAttrName | 1.3.6.1.4.1.1035.301.1.1.1.6 | DisplayString | read-only | The attribute name of which the error log event is associated. For example, it can be NetBackup job's Kbytes attribute, tape drive's number of drives, or VxVM's subdisk's size, or VCS's service's status etc. |
| STR logFile | 1.3.6.1.4.1.1035.301.1.1.1.7 | DisplayString | read-only | The log file name where the error strings are detected. |
| STR logErrStrs | 1.3.6.1.4.1.1035.301.1.1.1.8 | DisplayString | read-only | The error strings to monitor. |
| STR logDesc | 1.3.6.1.4.1.1035.301.1.1.1.9 | DisplayString | read-only | The description of the error log event. |
| STR logResolution | 1.3.6.1.4.1.1035.301.1.1.1.10 | DisplayString | read-only | The resolution of the error log event. |
| I32 logErrFlag | 1.3.6.1.4.1.1035.301.1.1.1.99 | Integer32 | read-only | Set the flag to 1 to indicate the error strings is found in the specified error log. 0 means no error. |
| I32 logErrcode | 1.3.6.1.4.1.1035.301.1.1.1.100 | Integer32 | read-only | The error code of log error. |
| STR logErrmsg | 1.3.6.1.4.1.1035.301.1.1.1.101 | DisplayString | read-only | The error message of log error. |
| I32 logErrFix | 1.3.6.1.4.1.1035.301.1.1.1.102 | Integer32 | read-write | Setting this error fix flag to 1 to kick off the logErrFixCmd. |
| STR logErrFixCmd | 1.3.6.1.4.1.1035.301.1.1.1.103 | DisplayString | read-write | The command that gets run when the logErrFix column is set to 1. |
| vrtsLogMonitor | 1.3.6.1.4.1.1035.301.1.251 | |||
| NTF logEvent | 1.3.6.1.4.1.1035.301.1.251.0.1 | The sequences of specific error strings are detected in given error log file on given host. | ||
| process | 1.3.6.1.4.1.1035.301.2 | |||
| psTable | 1.3.6.1.4.1.1035.301.2.1 | not-accessible | A table containing information on running programs/daemons/service configured for monitoring in the process.conf file of the ENE SNMP agent. Processes violating the available number of running processes or CPU, IO threshold configured in process.conf, or services.conf on NT are flagged with numerical and textual errors. | |
| psEntry | 1.3.6.1.4.1.1035.301.2.1.1 | not-accessible | An entry containing a process and its statistics. | |
| I32 psIndex | 1.3.6.1.4.1.1035.301.2.1.1.1 | Integer32 | read-only | Reference Index for each observed process or service. |
| I32 psId | 1.3.6.1.4.1.1035.301.2.1.1.2 | Integer32 | read-only | Actual process id for each observed process. |
| STR psName | 1.3.6.1.4.1.1035.301.2.1.1.3 | DisplayString | read-only | The process or service name that agent is counting and checking. |
| STR psAttr | 1.3.6.1.4.1.1035.301.2.1.1.4 | DisplayString | read-only | The process or service attribute name that agent is checking. It can be: existence, hanging or runaway. |
| I32 psMin | 1.3.6.1.4.1.1035.301.2.1.1.5 | Integer32 | read-only | The min threshold number of instances of monitored process that should be running. An error is generated if threshold is violated. |
| I32 psMax | 1.3.6.1.4.1.1035.301.2.1.1.6 | Integer32 | read-only | The max threshold number of instances of monitored process that should be running. An error is generated if threshold is violated. |
| I32 psCount | 1.3.6.1.4.1.1035.301.2.1.1.7 | Integer32 | read-only | The current number of process instances with the specified name. |
| STR psCpuPct | 1.3.6.1.4.1.1035.301.2.1.1.8 | DisplayString | read-only | The Percentage CPU threshold of the monitored process. |
| I32 psBytesIO | 1.3.6.1.4.1.1035.301.2.1.1.9 | Integer32 | read-only | The Bytes I/O threshold of the monitored process. |
| I32 psSlpMax | 1.3.6.1.4.1.1035.301.2.1.1.10 | Integer32 | read-only | The Maximum sleeping time threshold of the monitored process. |
| STR psHost | 1.3.6.1.4.1.1035.301.2.1.1.11 | DisplayString | read-only | The hostname of the monitored process. |
| I32 psErrFlag | 1.3.6.1.4.1.1035.301.2.1.1.99 | Integer32 | read-only | Set the flag to 1 to indicate the error with the process. 0 means no error. |
| I32 psErrcode | 1.3.6.1.4.1.1035.301.2.1.1.100 | Integer32 | read-only | The error code of process error. |
| STR psErrmsg | 1.3.6.1.4.1.1035.301.2.1.1.101 | DisplayString | read-only | The error message of the process error. |
| I32 psErrFix | 1.3.6.1.4.1.1035.301.2.1.1.102 | Integer32 | read-write | Setting this error fix flag to 1 to kick off the psErrFixCmd. |
| STR psErrFixCmd | 1.3.6.1.4.1.1035.301.2.1.1.103 | DisplayString | read-only | The command that will be executed when the psErrFix column is set to 1. |
| vrtsProcessMonitor | 1.3.6.1.4.1.1035.301.2.251 | |||
| NTF processEvent | 1.3.6.1.4.1.1035.301.2.251.0.1 | The monitored process has violated threshold condition of specified monitored attribute(existence, hanging or runaway) on given host. | ||
| collector | 1.3.6.1.4.1.1035.301.4 | |||
| clTable | 1.3.6.1.4.1.1035.301.4.1 | not-accessible | A table of collector based event management information configured in the collector.conf file of the ENE SNMP agent. | |
| clEntry | 1.3.6.1.4.1.1035.301.4.1.1 | not-accessible | An entry containing a collector information. | |
| I32 clIndex | 1.3.6.1.4.1.1035.301.4.1.1.1 | Integer32 | read-only | Reference Index for each the collector. |
| STR clName | 1.3.6.1.4.1.1035.301.4.1.1.2 | DisplayString | read-only | The collector name. |
| STR clHost | 1.3.6.1.4.1.1035.301.4.1.1.3 | DisplayString | read-only | The hostname where collector is running. |
| STR clScript | 1.3.6.1.4.1.1035.301.4.1.1.4 | DisplayString | read-only | The collector script file name, if will be prefixed with $ENEDir\config\Scripts directory |
| I32 clSampFreq | 1.3.6.1.4.1.1035.301.4.1.1.5 | Integer32 | read-write | The frequency in seconds that the collector script is executed. |
| I32 clFreq | 1.3.6.1.4.1.1035.301.4.1.1.6 | Integer32 | read-write | The frequency in seconds which specifies how frequent should ENE agent check whether the collected data is ready. The optimal value can be obtained by finding out how long a collector session is usually taking. |
| I32 clTimeout | 1.3.6.1.4.1.1035.301.4.1.1.7 | Integer32 | read-write | If no data after clTimeout seconds, then the collecting session is aborted. |
| I32 clPrdCode | 1.3.6.1.4.1.1035.301.4.1.1.8 | Integer32 | read-only | The VERITAS product code of which the collector is associated, it can be 0: NetBackup, 1: VxVM, 2: VxFS, 7: VCS etc. |
| STR clPrdName | 1.3.6.1.4.1.1035.301.4.1.1.9 | DisplayString | read-only | The VERITAS product name of which the collector is associated, it can be NetBackup, VxVM, VxFS, VCS etc. |
| STR clObjName | 1.3.6.1.4.1.1035.301.4.1.1.10 | DisplayString | read-only | The object name of the collection. For example, it can be NetBackup job, tape drive, or VxVM's subdisk, or VCS's service etc. |
| STR clAttrName | 1.3.6.1.4.1.1035.301.4.1.1.11 | DisplayString | read-only | The attribute name of which the collection is associated. For example, it can be NetBackup job's Kbytes attribute, tape drive's number of drives, or VxVM's subdisk's size, or VCS's service's status etc. |
| I32 clLow | 1.3.6.1.4.1.1035.301.4.1.1.12 | Integer32 | read-write | Indicate low threshold for the collected attribute value. If violated, event will be sent. |
| I32 clHigh | 1.3.6.1.4.1.1035.301.4.1.1.13 | Integer32 | read-write | Indicate high threshold for the collected attribute value. If violated, event will be sent. |
| I32 clCount | 1.3.6.1.4.1.1035.301.4.1.1.14 | Integer32 | read-write | The number of objects which we care about whether its attribute value is within low and high threshold. 0 means we are all object. |
| STR clObjNames | 1.3.6.1.4.1.1035.301.4.1.1.15 | DisplayString | read-write | List of object names, seperated by ';', which we care when threshold is violated. Leave name empty make it a wild card, means we care all objects. |
| STR clResolution | 1.3.6.1.4.1.1035.301.4.1.1.16 | DisplayString | read-write | Text resulotion when threshold value is violated. |
| I32 clErrFlag | 1.3.6.1.4.1.1035.301.4.1.1.99 | Integer32 | read-only | Set the flag to 1 to indicate the threshold is violated. 0 means no error. |
| I32 clErrcode | 1.3.6.1.4.1.1035.301.4.1.1.100 | Integer32 | read-only | The error code of for errors from this collector. |
| STR clErrmsg | 1.3.6.1.4.1.1035.301.4.1.1.101 | DisplayString | read-only | The error message of the threshold violation. |
| I32 clErrFix | 1.3.6.1.4.1.1035.301.4.1.1.102 | Integer32 | read-write | Setting this error fix flag to 1 to kick off the clErrFixCmd. |
| STR clErrFixCmd | 1.3.6.1.4.1.1035.301.4.1.1.103 | DisplayString | read-only | The command that will be executed when the clErrFix column is set to 1. |
| vrtsCollectorMonitor | 1.3.6.1.4.1.1035.301.4.251 | |||
| NTF collectorEvent | 1.3.6.1.4.1.1035.301.4.251.0.1 | The collection has detected a threshold violation condition of specified objects attribute on given host. | ||
| frequency | 1.3.6.1.4.1.1035.301.8 | |||
| I32 messagefreq | 1.3.6.1.4.1.1035.301.8.1 | Integer32 | read-write | Number of seconds interval for message log checking, you can set it here based on your event notification requirements. The default value is 30 seconds. |
| I32 processfreq | 1.3.6.1.4.1.1035.301.8.2 | Integer32 | read-write | Number of seconds interval for process checking, you can set it here based on your event notification requirements. The default value is 300 seconds. |
| I32 vxvmSamplefreq | 1.3.6.1.4.1.1035.301.8.11 | Integer32 | read-write | Set how frequent, in seconds, should a vxvm collector be executed.you can set it here based on your event notification requirements. The default value is 50 minutes or 3000 seconds. |
| I32 vxvmCheckfreq | 1.3.6.1.4.1.1035.301.8.12 | Integer32 | read-write | Set how frequent, in seconds, should ENE agent check whether the vxvm collected data is ready. The optimal value can be obtained by finding out how long a collector session is usually taking. The default value is 100 seconds. |
| I32 vxvmTimeout | 1.3.6.1.4.1.1035.301.8.13 | Integer32 | read-write | If no vxvm collection data ready after vxvmTimeout seconds in the same collection session, then the collecting session is aborted. The default value is 350 seconds. |
| I32 vxfsSamplefreq | 1.3.6.1.4.1.1035.301.8.21 | Integer32 | read-write | Set how frequent, in seconds, should a vxfs collector be executed.you can set it here based on your event notification requirements. The default value is 40 minutes or 2400 seconds. |
| I32 vxfsCheckfreq | 1.3.6.1.4.1.1035.301.8.22 | Integer32 | read-write | Set how frequent, in seconds, should ENE agent check whether the vxfs collected data is ready. The optimal value can be obtained by finding out how long a collector session is usually taking. The default value is 100 seconds. |
| I32 vxfsTimeout | 1.3.6.1.4.1.1035.301.8.23 | Integer32 | read-write | If no vxfs collection data ready after vxfsTimeout seconds in the same collection session, then the collecting session is aborted. The default value is 350 seconds. |
| vrtsEneMonitor | 1.3.6.1.4.1.1035.301.251 | |||
| NTF coldStart | 1.3.6.1.4.1.1035.301.251.0.1 | The SNMP ENE agent has started. | ||
| NTF heartBeat | 1.3.6.1.4.1.1035.301.251.0.3 | The SNMP ENE agent heart beat event to signal it is alive. | ||
| NTF shutDown | 1.3.6.1.4.1.1035.301.251.0.5 | The SNMP ENE agent shut down. |
RFC description
VERITAS backup, volume, filesystem and cluster software management including NetBackup and VxVM monitoring.
Start monitoring Veritas NetBackup backup server, tape robotic library/media changer used with NetBackup (media-pool/robot-slot inventory status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.