VRTS-SNMP-MIBv1 :: mountRequest

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › VRTS-SNMP-MIBv1 › mountRequest

mountRequest

Module: VRTS-SNMP-MIBv1

OID (symbolic): VRTS-SNMP-MIBv1::mountRequest

OID (numeric): 1.3.6.1.4.1.1035.1.251.0.308

Node type: NOTIFICATION-TYPE

Description: Description: A mount request is posted to the system log for a non-robotic device. It may be either for the mount itself or because the media needs 'write enabled'. Resolution: This message will also be displayed in the Device Manager window. Place the tape in the required non-robotic drive and satisfy the request through the Device Manager window. Deny the request through the Device Manager window. Or remove the media from the tape drive, write enable it and return it to the tape drive. This message is normally issued for tape drives under Operator control rather than AVR or Robotic control.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' VRTS-SNMP-MIBv1::mountRequest
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.1035.1.251.0.308

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:61021->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (419633245) 48 days, 13:38:52.45
  SNMPv2-MIB::snmpTrapOID.0 = OID: VRTS-SNMP-MIBv1::mountRequest

Start monitoring Veritas NetBackup backup server, tape robotic library/media changer used with NetBackup (media-pool/robot-slot inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VRTS-SNMP-MIBv1::mountRequest OID value, configure state conditions and alerts, and monitor any Veritas NetBackup backup server, tape robotic library/media changer used with NetBackup (media-pool/robot-slot inventory status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1035veritasVRTS-SNMP-MIBv1
1.3.6.1.4.1.1035.1netbackupVRTS-SNMP-MIBv1
1.3.6.1.4.1.1035.1.251vrtsNbuEventsVRTS-SNMP-MIBv1
1.3.6.1.4.1.1035.1.251.0.308mountRequestVRTS-SNMP-MIBv1