VIPTELA-OPER-MULTICAST

All MIBs › VIPTELA-OPER-MULTICAST

Organization: Viptela, Inc.

Last Updated: 2020-07-01

Category: Viptela SD-WAN

Description: Monitors Viptela SD-WAN multicast group memberships, PIM state, and replication trees.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is VIPTELA-OPER-MULTICAST?

This is a Viptela (now Cisco) SD-WAN operational-data MIB modeling PIM and IGMP multicast state across the SD-WAN fabric. It exposes IGMP protocol timers/summary data and a per-VPN multicast RPF (reverse path forwarding) table showing RPF address, status, and next-hop counts. Its monitoring value is primarily software/protocol status rather than physical hardware - a failed RPF status or a next-hop count of zero flags a broken multicast path for a given tenant, and it reveals whether multicast routing has converged correctly per VPN. It parallels standard PIM-MIB/IGMP-MIB concepts, adapted to Viptela's per-VPN SD-WAN operational data model. It is deployed on Viptela vEdge/vSmart SD-WAN routers carrying multicast traffic across multiple VPNs/tenants. Engineers can download the VIPTELA-OPER-MULTICAST file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in VIPTELA-OPER-MULTICAST. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Viptela/Cisco SD-WAN vEdge routers
Viptela vSmart controllers

Monitoring Examples

An admin would poll multicastRpfTable entries indexed by multicastRpfVpnId to check multicastRpfRpfStatus and multicastRpfNexthopCount per VPN - a failure status or zero next-hop count indicates a broken multicast path for that VPN - while igmpSummaryQueryInterval and igmpSummaryQuerierTimeout confirm IGMP querier timers are within expected values and a spike in igmpSummaryLastMemberQueryCount can reveal group membership churn.

What Can Be Monitored

IGMP query interval/timers
IGMP querier timeout
multicast RPF status per VPN
multicast RPF next-hop count
PIM/IGMP protocol state

Imported Objects

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
RowStatus
TEXTUAL-CONVENTION
TruthValue

From VIPTELA-GLOBAL

viptela

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using igmpStatisticsRxGeneralQuery OID:

Select a Viptela/Cisco SD-WAN vEdge router or Viptela vSmart controller (per-VPN PIM/IGMP RPF status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type igmpStatisticsRxGeneralQuery into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports rx General Query. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
igmp	1.3.6.1.4.1.41916.15.3
igmpGroupsEntry	1.3.6.1.4.1.41916.15.3.3.1		not-accessible
IGM igmpGroupsEvent	1.3.6.1.4.1.41916.15.3.3.1.9	IgmpGroupEventEnum	read-only	Last group event
STR igmpGroupsExpires	1.3.6.1.4.1.41916.15.3.3.1.7	String	read-only	Expiration of the group, in seconds
ADR igmpGroupsGroup	1.3.6.1.4.1.41916.15.3.3.1.3	InetAddressIP	not-accessible	Group Address
STR igmpGroupsIfName	1.3.6.1.4.1.41916.15.3.3.1.2	String	not-accessible	Interface name
IGM igmpGroupsState	1.3.6.1.4.1.41916.15.3.3.1.5	IgmpGroupStateEnum	read-only	IGMP Group State
igmpGroupsTable	1.3.6.1.4.1.41916.15.3.3		not-accessible	List of groups
STR igmpGroupsUptime	1.3.6.1.4.1.41916.15.3.3.1.6	String	read-only	How long the group has been up
STR igmpGroupsV1Expires	1.3.6.1.4.1.41916.15.3.3.1.8	String	read-only	Time to expiration of IGMPv1 host timer, in seconds
T/F igmpGroupsV1MembersPresent	1.3.6.1.4.1.41916.15.3.3.1.4	TruthValue	read-only	Whether IGMPv1 members are present
U32 igmpGroupsVpnId	1.3.6.1.4.1.41916.15.3.3.1.1	Unsigned32	not-accessible	VPN ID
igmpInterfaceEntry	1.3.6.1.4.1.41916.15.3.2.1		not-accessible
IGM igmpInterfaceEvent	1.3.6.1.4.1.41916.15.3.2.1.10	IgmpIfEventEnum	read-only	Last interface event
U32 igmpInterfaceGroupCount	1.3.6.1.4.1.41916.15.3.2.1.4	Unsigned32	read-only	Number of groups for this interface
IPP igmpInterfaceIfAddr	1.3.6.1.4.1.41916.15.3.2.1.3	IpPrefix	read-only	Address
STR igmpInterfaceIfName	1.3.6.1.4.1.41916.15.3.2.1.2	String	not-accessible	Interface
STR igmpInterfaceOtherQuerierExpiry	1.3.6.1.4.1.41916.15.3.2.1.9	String	read-only	Expiration of the other querier, in seconds
T/F igmpInterfaceQuerier	1.3.6.1.4.1.41916.15.3.2.1.5	TruthValue	read-only	Querier state on this interface
ADR igmpInterfaceQuerierIp	1.3.6.1.4.1.41916.15.3.2.1.6	InetAddressIP	read-only	Querier IP
STR igmpInterfaceQueryInterval	1.3.6.1.4.1.41916.15.3.2.1.7	String	read-only	Expiration of the other querier, in seconds
IGM igmpInterfaceState	1.3.6.1.4.1.41916.15.3.2.1.8	IgmpIfStateEnum	read-only	Interface state for this interface
igmpInterfaceTable	1.3.6.1.4.1.41916.15.3.2		not-accessible	List of interfaces
U32 igmpInterfaceVpnId	1.3.6.1.4.1.41916.15.3.2.1.1	Unsigned32	not-accessible	VPN ID
igmpStatisticsEntry	1.3.6.1.4.1.41916.15.3.4.1		not-accessible
C64 igmpStatisticsRxError	1.3.6.1.4.1.41916.15.3.4.1.8	Counter64	read-only	Rx Error
C64 igmpStatisticsRxGeneralQueryEx	1.3.6.1.4.1.41916.15.3.4.1.2	Counter64	read-only	Rx General Query
C64 igmpStatisticsRxGroupQuery	1.3.6.1.4.1.41916.15.3.4.1.3	Counter64	read-only	Rx Group Query
C64 igmpStatisticsRxLeave	1.3.6.1.4.1.41916.15.3.4.1.6	Counter64	read-only	Rx Leave
C64 igmpStatisticsRxUnknown	1.3.6.1.4.1.41916.15.3.4.1.7	Counter64	read-only	Rx Unknown
C64 igmpStatisticsRxV1Report	1.3.6.1.4.1.41916.15.3.4.1.4	Counter64	read-only	Rx V1 Report
C64 igmpStatisticsRxV2Report	1.3.6.1.4.1.41916.15.3.4.1.5	Counter64	read-only	Rx V2 Report
igmpStatisticsTable	1.3.6.1.4.1.41916.15.3.4		not-accessible	Packet statistics
C64 igmpStatisticsTxError	1.3.6.1.4.1.41916.15.3.4.1.11	Counter64	read-only	Tx Error
C64 igmpStatisticsTxGeneralQuery	1.3.6.1.4.1.41916.15.3.4.1.9	Counter64	read-only	Tx General Query
C64 igmpStatisticsTxGroupQuery	1.3.6.1.4.1.41916.15.3.4.1.10	Counter64	read-only	Tx Group Query
U32 igmpStatisticsVpnId	1.3.6.1.4.1.41916.15.3.4.1.1	Unsigned32	not-accessible	VPN ID
igmpSummary	1.3.6.1.4.1.41916.15.3.1
U32 igmpSummaryLastMemberQueryCount	1.3.6.1.4.1.41916.15.3.1.5	Unsigned32	read-only	Last member query count time
U32 igmpSummaryLastMemberQueryResponseTime	1.3.6.1.4.1.41916.15.3.1.4	Unsigned32	read-only	Last member query response time, in seconds
U32 igmpSummaryQuerierTimeout	1.3.6.1.4.1.41916.15.3.1.6	Unsigned32	read-only	Other Querier timeout, in seconds
U32 igmpSummaryQueryInterval	1.3.6.1.4.1.41916.15.3.1.2	Unsigned32	read-only	Query Interval, in seconds
U32 igmpSummaryQueryResponseTime	1.3.6.1.4.1.41916.15.3.1.3	Unsigned32	read-only	Query Response Time, in seconds
U32 igmpSummaryVersion	1.3.6.1.4.1.41916.15.3.1.1	Unsigned32	read-only	Version
multicast	1.3.6.1.4.1.41916.15.1
multicastReplicatorEntry	1.3.6.1.4.1.41916.15.1.5.1		not-accessible
U32 multicastReplicatorLoadPercent	1.3.6.1.4.1.41916.15.1.5.1.4	Unsigned32	read-only	Load percentage for VPN
ADR multicastReplicatorReplicatorAddress	1.3.6.1.4.1.41916.15.1.5.1.2	InetAddressIP	not-accessible	Address
INT multicastReplicatorReplicatorStatus	1.3.6.1.4.1.41916.15.1.5.1.3	INTEGER	read-only	Replicator status
multicastReplicatorTable	1.3.6.1.4.1.41916.15.1.5		not-accessible	List of replicators
U32 multicastReplicatorVpnId	1.3.6.1.4.1.41916.15.1.5.1.1	Unsigned32	not-accessible	VPN ID
multicastRpfEntry	1.3.6.1.4.1.41916.15.1.1.1		not-accessible
U32 multicastRpfNexthopCount	1.3.6.1.4.1.41916.15.1.1.1.4	Unsigned32	read-only	Next-hop count
ADR multicastRpfRpfAddress	1.3.6.1.4.1.41916.15.1.1.1.2	InetAddressIP	not-accessible	Address
multicastRpfRpfNexthopsEntry	1.3.6.1.4.1.41916.15.1.2.1		not-accessible
U32 multicastRpfRpfNexthopsIndex	1.3.6.1.4.1.41916.15.1.2.1.1	Unsigned32	not-accessible	Index
STR multicastRpfRpfNexthopsRpfIfName	1.3.6.1.4.1.41916.15.1.2.1.3	String	read-only	Interface
ADR multicastRpfRpfNexthopsRpfNbrAddr	1.3.6.1.4.1.41916.15.1.2.1.2	InetAddressIP	read-only	RPF neighbor address
ADR multicastRpfRpfNexthopsRpfTunnel	1.3.6.1.4.1.41916.15.1.2.1.4	InetAddressIP	read-only	Tunnel end point
multicastRpfRpfNexthopsTable	1.3.6.1.4.1.41916.15.1.2		not-accessible	List of next hops
INT multicastRpfRpfNhopsRpfTunColor	1.3.6.1.4.1.41916.15.1.2.1.5	INTEGER	read-only	Color
INT multicastRpfRpfNhopsRpfTunEncap	1.3.6.1.4.1.41916.15.1.2.1.6	INTEGER	read-only	Encapsulation
RPF multicastRpfRpfStatus	1.3.6.1.4.1.41916.15.1.1.1.3	RpfStatusEnum	read-only	RPF status
multicastRpfTable	1.3.6.1.4.1.41916.15.1.1		not-accessible	List of RPF entries
U32 multicastRpfVpnId	1.3.6.1.4.1.41916.15.1.1.1.1	Unsigned32	not-accessible	VPN ID
multicastTopologyEntry	1.3.6.1.4.1.41916.15.1.3.1		not-accessible
STR multicastTopologyExpires	1.3.6.1.4.1.41916.15.1.3.1.12	String	read-only	Expires (Days:Hours:Minutes:Seconds)
MUL multicastTopologyFlags	1.3.6.1.4.1.41916.15.1.3.1.5	MulticastFlags	read-only	Topology flags
ADR multicastTopologyGroup	1.3.6.1.4.1.41916.15.1.3.1.2	InetAddressIP	not-accessible	Group address
NUM multicastTopologyJoinType	1.3.6.1.4.1.41916.15.1.3.1.4	JoinTypeEnum	not-accessible	Type of join
ADR multicastTopologyReplicator	1.3.6.1.4.1.41916.15.1.3.1.7	InetAddressIP	read-only	Multicast replicator
ADR multicastTopologyRpAddress	1.3.6.1.4.1.41916.15.1.3.1.6	InetAddressIP	read-only	RP address
ADR multicastTopologySource	1.3.6.1.4.1.41916.15.1.3.1.3	InetAddressIP	not-accessible	Source address
multicastTopologyTable	1.3.6.1.4.1.41916.15.1.3		not-accessible	PIM topology database
multicastTopologyTopologyOilEntry	1.3.6.1.4.1.41916.15.1.4.1		not-accessible
U32 multicastTopologyTopologyOilIndex	1.3.6.1.4.1.41916.15.1.4.1.1	Unsigned32	not-accessible	Index
MUL multicastTopologyTopologyOilOifFlags	1.3.6.1.4.1.41916.15.1.4.1.3	MulticastOifFlags	read-only	Outgoing interface flag
STR multicastTopologyTopologyOilOifName	1.3.6.1.4.1.41916.15.1.4.1.2	String	read-only	Outgoing interface name
ADR multicastTopologyTopologyOilOifTunnel	1.3.6.1.4.1.41916.15.1.4.1.4	InetAddressIP	read-only	Outgoing tunnel end point
multicastTopologyTopologyOilTable	1.3.6.1.4.1.41916.15.1.4		not-accessible	List of outgoing interfaces
STR multicastTopologyUpstreamInterface	1.3.6.1.4.1.41916.15.1.3.1.10	String	read-only	RPF interface
ADR multicastTopologyUpstreamNeighbor	1.3.6.1.4.1.41916.15.1.3.1.8	InetAddressIP	read-only	Upstream neighbor
UPS multicastTopologyUpstreamState	1.3.6.1.4.1.41916.15.1.3.1.9	UpstreamStateEnum	read-only	Upstream neighbor
STR multicastTopologyUpTime	1.3.6.1.4.1.41916.15.1.3.1.11	String	read-only	Uptime (Days:Hours:Minutes:Seconds)
U32 multicastTopologyVpnId	1.3.6.1.4.1.41916.15.1.3.1.1	Unsigned32	not-accessible	VPN ID
multicastTunnelEntry	1.3.6.1.4.1.41916.15.1.6.1		not-accessible
REP multicastTunnelReplicator	1.3.6.1.4.1.41916.15.1.6.1.4	ReplicatorStatusEnum	read-only	Replicator status
multicastTunnelTable	1.3.6.1.4.1.41916.15.1.6		not-accessible	List of tunnels
ADR multicastTunnelTunnelAddress	1.3.6.1.4.1.41916.15.1.6.1.2	InetAddressIP	not-accessible	Tunnel end point
INT multicastTunnelTunnelStatus	1.3.6.1.4.1.41916.15.1.6.1.3	INTEGER	read-only	Tunnel status
U32 multicastTunnelVpnId	1.3.6.1.4.1.41916.15.1.6.1.1	Unsigned32	not-accessible	VPN ID
pim	1.3.6.1.4.1.41916.15.2
ADR pimInterfaceDrAddress	1.3.6.1.4.1.41916.15.2.1.1.7	InetAddressIP	read-only	DR address
pimInterfaceEntry	1.3.6.1.4.1.41916.15.2.1.1		not-accessible
U32 pimInterfaceHelloInterval	1.3.6.1.4.1.41916.15.2.1.1.5	Unsigned32	read-only	Hello interval
IPP pimInterfaceIfAddr	1.3.6.1.4.1.41916.15.2.1.1.3	IpPrefix	read-only	Address
STR pimInterfaceIfName	1.3.6.1.4.1.41916.15.2.1.1.2	String	not-accessible	Interface
U32 pimInterfaceJoinPruneInterval	1.3.6.1.4.1.41916.15.2.1.1.8	Unsigned32	read-only	Join prune interval
U32 pimInterfaceNeighborCount	1.3.6.1.4.1.41916.15.2.1.1.4	Unsigned32	read-only	Neighbor count
U32 pimInterfacePriority	1.3.6.1.4.1.41916.15.2.1.1.6	Unsigned32	read-only	DR priority
pimInterfaceTable	1.3.6.1.4.1.41916.15.2.1		not-accessible	List of interfaces
U32 pimInterfaceVpnId	1.3.6.1.4.1.41916.15.2.1.1.1	Unsigned32	not-accessible	VPN ID
ADR pimNeighborDrAddress	1.3.6.1.4.1.41916.15.2.3.1.8	InetAddressIP	read-only	DR address
pimNeighborEntry	1.3.6.1.4.1.41916.15.2.3.1		not-accessible
STR pimNeighborExpires	1.3.6.1.4.1.41916.15.2.3.1.5	String	read-only	Expires (Days:Hours:Minutes:Seconds)
U32 pimNeighborHoldTime	1.3.6.1.4.1.41916.15.2.3.1.7	Unsigned32	read-only	Neighbor's advertised hold time
STR pimNeighborIfName	1.3.6.1.4.1.41916.15.2.3.1.2	String	not-accessible	Interface
ADR pimNeighborNbrAddr	1.3.6.1.4.1.41916.15.2.3.1.3	InetAddressIP	not-accessible	Neighbor address
U32 pimNeighborPriority	1.3.6.1.4.1.41916.15.2.3.1.6	Unsigned32	read-only	DR priority
pimNeighborTable	1.3.6.1.4.1.41916.15.2.3		not-accessible	List of neighbors
STR pimNeighborUpTime	1.3.6.1.4.1.41916.15.2.3.1.4	String	read-only	Uptime (Days:Hours:Minutes:Seconds)
U32 pimNeighborVpnId	1.3.6.1.4.1.41916.15.2.3.1.1	Unsigned32	not-accessible	VPN ID
pimRpMappingEntry	1.3.6.1.4.1.41916.15.2.2.1		not-accessible
IPP pimRpMappingGroup	1.3.6.1.4.1.41916.15.2.2.1.3	IpPrefix	not-accessible	Group prefix
ADR pimRpMappingRpAddress	1.3.6.1.4.1.41916.15.2.2.1.4	InetAddressIP	read-only	RP address
pimRpMappingTable	1.3.6.1.4.1.41916.15.2.2		not-accessible	List of RP mapping entries
INT pimRpMappingType	1.3.6.1.4.1.41916.15.2.2.1.2	INTEGER	not-accessible	Mapping source type
U32 pimRpMappingVpnId	1.3.6.1.4.1.41916.15.2.2.1.1	Unsigned32	not-accessible	VPN ID
U32 pimStatisticsAssertRx	1.3.6.1.4.1.41916.15.2.4.1.4	Unsigned32	read-only	Assert packets received
U32 pimStatisticsAssertTx	1.3.6.1.4.1.41916.15.2.4.1.12	Unsigned32	read-only	Assert packets transmitted
U32 pimStatisticsAutoRpAnnounceRx	1.3.6.1.4.1.41916.15.2.4.1.5	Unsigned32	read-only	Auto-RP announce packets received
U32 pimStatisticsAutoRpMappingRx	1.3.6.1.4.1.41916.15.2.4.1.6	Unsigned32	read-only	Auto-RP mapping packets received
U32 pimStatisticsBadRx	1.3.6.1.4.1.41916.15.2.4.1.9	Unsigned32	read-only	Bad packets received
pimStatisticsEntry	1.3.6.1.4.1.41916.15.2.4.1		not-accessible
U32 pimStatisticsHelloRx	1.3.6.1.4.1.41916.15.2.4.1.2	Unsigned32	read-only	Hello packets received
U32 pimStatisticsHelloTx	1.3.6.1.4.1.41916.15.2.4.1.10	Unsigned32	read-only	Hello packets transmitted
U32 pimStatisticsJoinPruneRx	1.3.6.1.4.1.41916.15.2.4.1.3	Unsigned32	read-only	Join-prune packets received
U32 pimStatisticsJoinPruneTx	1.3.6.1.4.1.41916.15.2.4.1.11	Unsigned32	read-only	Join-prune packets transmitted
pimStatisticsTable	1.3.6.1.4.1.41916.15.2.4		not-accessible	Packet statistics
U32 pimStatisticsUnknownRx	1.3.6.1.4.1.41916.15.2.4.1.8	Unsigned32	read-only	Unknown packets received
U32 pimStatisticsUnsupportedRx	1.3.6.1.4.1.41916.15.2.4.1.7	Unsigned32	read-only	Unsupported packets received
U32 pimStatisticsVpnId	1.3.6.1.4.1.41916.15.2.4.1.1	Unsigned32	not-accessible	VPN ID
viptela_oper_multicast	1.3.6.1.4.1.41916.15			This module defines the data model for PIM operational data

RFC description

PIM multicast operational data model for Viptela SD-WAN platforms tracking group memberships and flows.

Start monitoring Viptela/Cisco SD-WAN vEdge routers, Viptela vSmart controllers (per-VPN PIM/IGMP RPF status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download VIPTELA-OPER-MULTICAST