| OID symbolic | OID numeric | Type | Access | Description |
|---|
| velocity | 1.3.6.1.4.1.15601 | | | |
| velocitySystem | 1.3.6.1.4.1.15601.1 | | | |
| TIK velocitySystemUptime | 1.3.6.1.4.1.15601.1.1 | TimeTicks | read-only | The amount of time since this host was last
initialized. Note that this is different from
sysUpTime in the SNMPv2-MIB [RFC1907] because
sysUpTime is the uptime of the network management
portion of the system. |
| DAT velocitySystemDate | 1.3.6.1.4.1.15601.1.2 | DateAndTime | read-write | The host's notion of the local date and time of day. |
| I32 velocitySystemInitialLoadDevice | 1.3.6.1.4.1.15601.1.3 | Integer32 | read-write | The index of the velocityDeviceEntry for the device from
which this host is configured to load its initial
operating system configuration (i.e., which operating
system code and/or boot parameters).
Note that writing to this object just changes the
configuration that will be used the next time the
operating system is loaded and does not actually cause
the reload to occur. |
| NUM velocitySystemInitialLoadParameters | 1.3.6.1.4.1.15601.1.4 | InternationalDisplayString | read-write | This object contains the parameters (e.g. a pathname
and parameter) supplied to the load device when
requesting the initial operating system configuration
from that device.
Note that writing to this object just changes the
configuration that will be used the next time the
operating system is loaded and does not actually cause
the reload to occur. |
| G32 velocitySystemNumUsersEx | 1.3.6.1.4.1.15601.1.5 | Gauge32 | read-only | The number of user sessions for which this host is
storing state information. A session is a collection
of processes requiring a single act of user
authentication and possibly subject to collective job
control. |
| G32 velocitySystemProcesses | 1.3.6.1.4.1.15601.1.6 | Gauge32 | read-only | The number of process contexts currently loaded or
running on this system. |
| I32 velocitySystemMaxProcesses | 1.3.6.1.4.1.15601.1.7 | Integer32 | read-only | The maximum number of process contexts this system
can support. If there is no fixed maximum, the value
should be zero. On systems that have a fixed maximum,
this object can help diagnose failures that occur when
this maximum is reached. |
| I32 velocitySystemPageIn | 1.3.6.1.4.1.15601.1.8 | Integer32 | read-only | Total number of pages that the system paged in |
| I32 velocitySystemPageOut | 1.3.6.1.4.1.15601.1.9 | Integer32 | read-only | Total number of pages that the system paged out |
| I32 velocitySystemSwapIn | 1.3.6.1.4.1.15601.1.10 | Integer32 | read-only | Total number of swap pages that have been brought in |
| I32 velocitySystemSwapOut | 1.3.6.1.4.1.15601.1.11 | Integer32 | read-only | Total number of swap pages that have been swapped out |
| I32 velocitySystemInterupts | 1.3.6.1.4.1.15601.1.12 | Integer32 | read-only | Total number of interupts since system boot |
| I32 velocitySystemContext | 1.3.6.1.4.1.15601.1.13 | Integer32 | read-only | Total number of context switches the system had done. |
| I32 velocitySystemProcessTotal | 1.3.6.1.4.1.15601.1.14 | Integer32 | read-only | Total number of processes the system has started since boot. |
| velocitySWRun | 1.3.6.1.4.1.15601.4 | | | |
| I32 velocitySWOSIndex | 1.3.6.1.4.1.15601.4.1 | Integer32 | read-only | The value of the velocitySWRunIndex for the velocitySWRunEntry
that represents the primary operating system running
on this velocity. This object is useful for quickly and
uniquely identifying that primary operating system. |
| velocitySWRunTable | 1.3.6.1.4.1.15601.4.2 | | not-accessible | The (conceptual) table of software running on the
velocity. |
| velocitySWRunEntry | 1.3.6.1.4.1.15601.4.2.1 | | not-accessible | A (conceptual) entry for one piece of software
running on the velocity Note that because the installed
software table only contains information for software
stored locally on this velocity, not every piece of
running software will be found in the installed
software table. This is true of software that was
loaded and run from a non-local source, such as a
network-mounted file system.
As an example of how objects in this table are named,
an instance of the velocitySWRunName object might be named
velocitySWRunName.1287 |
| I32 velocitySWRunIndex | 1.3.6.1.4.1.15601.4.2.1.1 | Integer32 | read-only | A unique value for each piece of software running on
the velocity. Wherever possible, this should be the
system's native, unique identification number. |
| NUM velocitySWRunName | 1.3.6.1.4.1.15601.4.2.1.2 | InternationalDisplayString | read-only | A textual description of this running piece of
software, including the manufacturer, revision, and
the name by which it is commonly known. If this
software was installed locally, this should be the
same string as used in the corresponding
velocitySWInstalledName. |
| PRO velocitySWRunID | 1.3.6.1.4.1.15601.4.2.1.3 | ProductID | read-only | The product ID of this running piece of software. |
| NUM velocitySWRunPath | 1.3.6.1.4.1.15601.4.2.1.4 | InternationalDisplayString | read-only | A description of the location on long-term storage
(e.g. a disk drive) from which this software was
loaded. |
| NUM velocitySWRunParameters | 1.3.6.1.4.1.15601.4.2.1.5 | InternationalDisplayString | read-only | A description of the parameters supplied to this
software when it was initially loaded. |
| INT velocitySWRunType | 1.3.6.1.4.1.15601.4.2.1.6 | INTEGER | read-only | The type of this software. |
| INT velocitySWRunStatus | 1.3.6.1.4.1.15601.4.2.1.7 | INTEGER | read-write | The status of this running piece of software.
Setting this value to invalid(4) shall cause this
software to stop running and to be unloaded. Sets to
other values are not valid. |
| I32 velocitySWRunPPID | 1.3.6.1.4.1.15601.4.2.1.8 | Integer32 | read-only | The ID of the parent process. |
| I32 velocitySWRunPGRP | 1.3.6.1.4.1.15601.4.2.1.9 | Integer32 | read-only | The ID of the process group that the process belongs to. |
| velocitySWRunPerf | 1.3.6.1.4.1.15601.5 | | | |
| velocitySWRunPerfTable | 1.3.6.1.4.1.15601.5.1 | | not-accessible | The (conceptual) table of running software
performance metrics. |
| velocitySWRunPerfEntry | 1.3.6.1.4.1.15601.5.1.1 | | not-accessible | A (conceptual) entry containing software performance
metrics. As an example, an instance of the
velocitySWRunPerfCPU object might be named
velocitySWRunPerfCPU.1287 |
| I32 velocitySWRunPerfCPUUser | 1.3.6.1.4.1.15601.5.1.1.1 | Integer32 | read-only | The number of centi-seconds of the User's CPU
resources consumed by this process. Note that on a
multi-processor system, this value may increment by
more than one centi-second in one centi-second of real
(wall clock) time. |
| I32 velocitySWRunPerfCPUSys | 1.3.6.1.4.1.15601.5.1.1.2 | Integer32 | read-only | The number of centi-seconds of the system's CPU
resources consumed by this process. Note that on a
multi-processor system, this value may increment by
more than one centi-second in one centi-second of real
(wall clock) time. |
| KBY velocitySWRunPerfMem | 1.3.6.1.4.1.15601.5.1.1.3 | KBytes | read-only | The total amount of real system memory allocated to
this process. |
| I32 velocitySWRunPerfCPUCummUser | 1.3.6.1.4.1.15601.5.1.1.4 | Integer32 | read-only | The number of cummulative centi-seconds of the total user's CPU
resources consumed by this process. Note that on a
multi-processor system, this value may increment by
more than one centi-second in one centi-second of real
(wall clock) time. |
| I32 velocitySWRunPerfCPUCummSys | 1.3.6.1.4.1.15601.5.1.1.5 | Integer32 | read-only | The number of cummulative centi-seconds of the total system's CPU
resources consumed by this process. Note that on a
multi-processor system, this value may increment by
more than one centi-second in one centi-second of real
(wall clock) time. |
| I32 velocitySWRunPerfMinFault | 1.3.6.1.4.1.15601.5.1.1.6 | Integer32 | read-only | The number of minor page faults. (Those that have not
required loading a page from disk.) |
| I32 velocitySWRunPerfMajFault | 1.3.6.1.4.1.15601.5.1.1.7 | Integer32 | read-only | The number of major page faults. (Those that have
required loading a page from disk.) |
| I32 velocitySWRunPerfMinFaultCumm | 1.3.6.1.4.1.15601.5.1.1.8 | Integer32 | read-only | The number of minor page faults for this process and its
children. (Those that have not required loading a page
from disk.) |
| I32 velocitySWRunPerfMajFaultCumm | 1.3.6.1.4.1.15601.5.1.1.9 | Integer32 | read-only | The number of major page faults. for this process and its
children. (Those that have required loading a page from disk.) |
| I32 velocitySWRunPerfPrio | 1.3.6.1.4.1.15601.5.1.1.11 | Integer32 | read-only | The standard nice value, plus fifteen. The value is never
negative in the kernel. |
| NUM velocitySWRunPerfAll | 1.3.6.1.4.1.15601.5.1.1.12 | InternationalDisplayString | read-only | The complete information from the stat file for the given process |
| NUM velocitySWRunPerfUID | 1.3.6.1.4.1.15601.5.1.1.13 | InternationalDisplayString | read-only | The owning user ID and group ID of this process. |
| NUM velocitySWRunPerfUName | 1.3.6.1.4.1.15601.5.1.1.14 | InternationalDisplayString | read-only | The name of the owning user ID and group of this process. |
| velocityAppTable | 1.3.6.1.4.1.15601.6 | | not-accessible | A table containing a list of applications that are of special
interest. The process table is searched for the given string
that identifies the given process(s). Other than being able to
return the process ids of interest this is the same MIB is the
UCD-snmp proc MIB. |
| velocityAppEntry | 1.3.6.1.4.1.15601.6.1 | | not-accessible | An entry containing an application and its statistics. |
| I32 velocityAppIndex | 1.3.6.1.4.1.15601.6.1.1 | Integer32 | read-only | Reference Index for each observed application. |
| STR velocityAppNames | 1.3.6.1.4.1.15601.6.1.2 | DisplayString | read-only | The application name we're counting/checking on. |
| STR velocityAppPid | 1.3.6.1.4.1.15601.6.1.3 | DisplayString | read-only | The absolute location of the PID file for the application. |
| I32 velocityAppMin | 1.3.6.1.4.1.15601.6.1.4 | Integer32 | read-only | The minimum number of processes for that applicationes that should be
running. An error flag is generated if the number of
running processes is < the minimum. |
| I32 velocityAppMax | 1.3.6.1.4.1.15601.6.1.5 | Integer32 | read-only | The maximum number of processes for that application that should be
running. An error flag is generated if the number of
running processes is > the maximum. |
| I32 velocityAppCount | 1.3.6.1.4.1.15601.6.1.6 | Integer32 | read-only | The number of current applications running with the name
in question. |
| STR velocityAppIds | 1.3.6.1.4.1.15601.6.1.7 | DisplayString | read-only | The list of process Ids that match the Application name. |
| I32 velocityAppErrorFlag | 1.3.6.1.4.1.15601.6.1.100 | Integer32 | read-only | A Error flag to indicate trouble with a application. It
goes to 1 if there is an error, 0 if no error. |
| STR velocityAppErrMessage | 1.3.6.1.4.1.15601.6.1.101 | DisplayString | read-only | An error message describing the problem (if one exists). |
| velocityMIBAdminInfo | 1.3.6.1.4.1.15601.7 | | | |
| velocityMibModule | 1.3.6.1.4.1.15601.7.1 | | | This MIB is an extension of the host MIB. This MIB currently
only runs on linux. This is the original version. |
| velocityMIBCompliances | 1.3.6.1.4.1.15601.7.2 | | | |
| velocityMIBGroups | 1.3.6.1.4.1.15601.7.3 | | | |
| velocitySystemGroup | 1.3.6.1.4.1.15601.7.3.1 | | | The Velocity System Group. |
| velocitySWRunGroup | 1.3.6.1.4.1.15601.7.3.4 | | | The Velocity Resources Running Software Group. |
| velocitySWRunPerfGroup | 1.3.6.1.4.1.15601.7.3.5 | | | The Velocity Resources Running Software
Performance Group. |
