VEL-HOST2-MIB

All MIBs › VEL-HOST2-MIB

Organization: Vigintos Elektronika

Last Updated: 2015-08-12

Category: Host and System Monitoring

Description: Monitors Vigintos Elektronika host system hardware sensors, power, and environmental parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is VEL-HOST2-MIB?

This is the vendor MIB for Vigintos Elektronika's "Host Controller 2," an embedded controller product used to manage attached field devices. It exposes device identity and firmware/loader version information, plus tables of attached device attributes, text values, events, parameters, quantities, and commands. For monitoring purposes it reports software status through host2Version/host2LoaderVersion (confirming firmware/bootloader levels) and hardware/operational status of attached devices through host2DevEvtTable (an event/fault log) and host2DevParTable/host2DevQntTable (parameter and quantitative sensor readings). It is a standalone enterprise MIB with no explicit dependency on IETF standard MIBs. It is typically deployed on Host Controller 2 units embedded in field equipment that is polled and commanded remotely via SNMP. Engineers can download the VEL-HOST2-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in VEL-HOST2-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Vigintos Elektronika Host Controller 2 devices

Monitoring Examples

An admin would poll host2DevAttrTable and host2DevEvtTable to see the attributes of attached devices and their event/fault history, check host2Version and host2LoaderVersion to confirm firmware and bootloader levels match the expected release, and inspect host2DevQntTable for quantitative sensor readings that would reveal an anomaly if a value drifted outside its normal range; host2CmdTable and host2HistoryTable support issuing commands and reviewing past command activity for troubleshooting.

What Can Be Monitored

device firmware/loader version
device attributes
device event log
device parameters
device quantitative readings
command history

Imported Objects

From RFC-1215

TRAP-TYPE

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From VEL-MIB

vel	MODULE-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
host2	1.3.6.1.4.1.27993.5			This is the MIB file of Host Controller 2.
NTF host2DevConnectionTrap	1.3.6.1.4.1.27993.5.0.5001			This trap is sent when the status of network connection of device is changed. There can be two types of network connection status: connected or disconnected.
NTF host2DevEvtStateTrap	1.3.6.1.4.1.27993.5.0.5002			This trap is sent when the state of device is changed: for example, device can enter stand-by mode or there is an alarm, not associated with parameters measured.
NTF host2DevParStateTrap	1.3.6.1.4.1.27993.5.0.5003			This trap is sent when the state of measured parameters is changed.
STR host2Name	1.3.6.1.4.1.27993.5.1	DisplayString	read-only	Host Controller name.
STR host2Version	1.3.6.1.4.1.27993.5.2	DisplayString	read-only	Host Controller version
STR host2LoaderVersion	1.3.6.1.4.1.27993.5.3	DisplayString	read-only	Host Controller loader version
host2CmdTable	1.3.6.1.4.1.27993.5.4		not-accessible	A list of Host Controller command entries.
host2CmdEntry	1.3.6.1.4.1.27993.5.4.1		not-accessible	An entry of Host Controller commands.
INT host2CmdIndex	1.3.6.1.4.1.27993.5.4.1.1	INTEGER	read-only	An id for each command.
STR host2CmdName	1.3.6.1.4.1.27993.5.4.1.2	DisplayString	read-only	The name of a command.
INT host2CmdExecute	1.3.6.1.4.1.27993.5.4.1.3	INTEGER	read-write	Instructions to execute the command of host. If value no(0) is sent, the command will not be executed. If value yes(1) is sent, the command will be executed.
host2HistoryTable	1.3.6.1.4.1.27993.5.5		not-accessible	A list of Host Controller history entries.
host2HistoryEntry	1.3.6.1.4.1.27993.5.5.1		not-accessible	An entry of Host Controller history.
INT host2HisIndex	1.3.6.1.4.1.27993.5.5.1.1	INTEGER	read-only	Unique index for each event.
STR host2HisRecord	1.3.6.1.4.1.27993.5.5.1.2	DisplayString	read-only	The text description of an event.
host2DevAttrTable	1.3.6.1.4.1.27993.5.6		not-accessible	A list of device attributes entries.
host2DevAttrEntry	1.3.6.1.4.1.27993.5.6.1		not-accessible	An entry of device attributes.
INT host2DevIndex	1.3.6.1.4.1.27993.5.6.1.1	INTEGER	read-only	Unique ID for each device.
INT host2DevLocalAddr	1.3.6.1.4.1.27993.5.6.1.2	INTEGER	read-only	Local address for each device.
INT host2DevTypeNumber	1.3.6.1.4.1.27993.5.6.1.3	INTEGER	read-only	Number of type for each device.
INT host2DevLanState	1.3.6.1.4.1.27993.5.6.1.4	INTEGER	read-only	Network connection state for each device.
host2DevTxtTable	1.3.6.1.4.1.27993.5.7		not-accessible	A list of textual data that are read from the devices. If device is disconnected, there is no entry for this device in the table.
host2DevTxtEntry	1.3.6.1.4.1.27993.5.7.1		not-accessible	An entry of textual data of devices.
INT host2DevTxtIndex	1.3.6.1.4.1.27993.5.7.1.1	INTEGER	read-only	Unique ID for each textual data of device.
STR host2DevTxtName	1.3.6.1.4.1.27993.5.7.1.2	DisplayString	read-only	The description of textual data of device.
STR host2DevTxtValue	1.3.6.1.4.1.27993.5.7.1.3	DisplayString	read-only	The value of textual data of device.
host2DevEvtTable	1.3.6.1.4.1.27993.5.8		not-accessible	A list of events of devices entries. If device is disconnected, there is no entry for this device in the table.
host2DevEvtEntry	1.3.6.1.4.1.27993.5.8.1		not-accessible	An entry of events of devices.
INT host2DevEvtIndex	1.3.6.1.4.1.27993.5.8.1.1	INTEGER	read-only	Id for each event.
STR host2DevEvtName	1.3.6.1.4.1.27993.5.8.1.2	DisplayString	read-only	The description of a event.
INT host2DevEvtType	1.3.6.1.4.1.27993.5.8.1.3	INTEGER	read-only	The type of a event.
INT host2DevEvtState	1.3.6.1.4.1.27993.5.8.1.4	INTEGER	read-only	The state of a event.
host2DevParTable	1.3.6.1.4.1.27993.5.9		not-accessible	A list of parameters of devices entries. If device is disconnected, there is no entry for this device in the table.
host2DevParEntry	1.3.6.1.4.1.27993.5.9.1		not-accessible	An entry of parameters of devices.
INT host2DevParIndex	1.3.6.1.4.1.27993.5.9.1.1	INTEGER	read-only	Unique ID for each parameter.
STR host2DevParName	1.3.6.1.4.1.27993.5.9.1.2	DisplayString	read-only	The name of a parameter.
STR host2DevParValue	1.3.6.1.4.1.27993.5.9.1.3	DisplayString	read-only	The value of a parameter.
STR host2DevParUnit	1.3.6.1.4.1.27993.5.9.1.4	DisplayString	read-only	The measurement unit of a parameter.
INT host2DevParStateType	1.3.6.1.4.1.27993.5.9.1.5	INTEGER	read-only	The type of state of a parameter.
INT host2DevParState	1.3.6.1.4.1.27993.5.9.1.6	INTEGER	read-only	The state of a parameter.
host2DevQntTable	1.3.6.1.4.1.27993.5.10		not-accessible	A list of quantities of devices entries. If device is disconnected, there is no entry for this device in the table.
host2DevQntEntry	1.3.6.1.4.1.27993.5.10.1		not-accessible	An entry of quantities of device.
INT host2DevQntIndex	1.3.6.1.4.1.27993.5.10.1.1	INTEGER	read-only	An id for each quantity.
STR host2DevQntName	1.3.6.1.4.1.27993.5.10.1.2	DisplayString	read-only	The name of a quantity.
STR host2DevQntValue	1.3.6.1.4.1.27993.5.10.1.3	DisplayString	read-write	The value of a quantity.
STR host2DevQntMin	1.3.6.1.4.1.27993.5.10.1.4	DisplayString	read-only	The minimum value of a quantity.
STR host2DevQntMax	1.3.6.1.4.1.27993.5.10.1.5	DisplayString	read-only	The maximum value of a quantity.
INT host2DevQntAccess	1.3.6.1.4.1.27993.5.10.1.6	INTEGER	read-only	The access to change the value of a quantity.
host2DevCmdTable	1.3.6.1.4.1.27993.5.11		not-accessible	A list of commands of devices entries. If device is disconnected, there is no entry for this device in the table.
host2DevCmdEntry	1.3.6.1.4.1.27993.5.11.1		not-accessible	An entry of commands of device.
INT host2DevCmdIndex	1.3.6.1.4.1.27993.5.11.1.1	INTEGER	read-only	An id for each command.
STR host2DevCmdName	1.3.6.1.4.1.27993.5.11.1.2	DisplayString	read-only	The name of a command.
INT host2DevCmdExecute	1.3.6.1.4.1.27993.5.11.1.3	INTEGER	read-write	Instructions to execute the command of device. If value no(0) is sent, the command will not be executed. If value yes(1) is sent, the command will be executed.

RFC description

Vigintos Host Controller 2 MIB for command execution and version information monitoring.

Start monitoring Vigintos Elektronika Host Controller 2 devices (attached field-device event/parameter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download VEL-HOST2-MIB

What Is VEL-HOST2-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description