VEL-HOST2-MIB :: host2CmdExecute

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › VEL-HOST2-MIB › host2CmdExecute

host2CmdExecute

Module: VEL-HOST2-MIB

OID (symbolic): VEL-HOST2-MIB::host2CmdExecute

OID (numeric): 1.3.6.1.4.1.27993.5.4.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Instructions to execute the command of host. If value no(0) is sent, the command will not be executed. If value yes(1) is sent, the command will be executed.

What is host2CmdExecute?

Read-write INTEGER (no/yes) that triggers the named host command when set to yes(1); an admin sets this to remotely run a Host Controller action such as a reset or self-test.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.27993.5.4.1.3
snmpwalk -v2c -c public <target> VEL-HOST2-MIB::host2CmdExecute

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.27993.5.4.1.3.1
snmpget -v2c -c public <target> VEL-HOST2-MIB::host2CmdExecute.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.27993.5.4.1.3.1 i <value>

Start monitoring Vigintos Elektronika Host Controller 2 devices (attached field-device event/parameter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VEL-HOST2-MIB::host2CmdExecute OID value, configure state conditions and alerts, and monitor any Vigintos Elektronika Host Controller 2 devices (attached field-device event/parameter status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.27993velVEL-MIB
Numeric OIDNameModule
1.3.6.1.4.1.27993.5host2VEL-HOST2-MIB
1.3.6.1.4.1.27993.5.4host2CmdTableVEL-HOST2-MIB
1.3.6.1.4.1.27993.5.4.1host2CmdEntryVEL-HOST2-MIB
1.3.6.1.4.1.27993.5.4.1.3host2CmdExecuteVEL-HOST2-MIB