All MIBs › Unisphere-Data-FRACTIONAL-T1-MIB › usdFt1NextIfIndex
usdFt1NextIfIndex
Module: Unisphere-Data-FRACTIONAL-T1-MIB
OID (symbolic): Unisphere-Data-FRACTIONAL-T1-MIB::usdFt1NextIfIndex
OID (numeric): 1.3.6.1.4.1.4874.2.2.6.1.1
Node type: OBJECT-TYPE
Type: UsdNextIfIndex
Access: read-only
Description: Coordinate ifIndex value allocation for entries in usdFt1IfTable.
A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended.
Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
What is usdFt1NextIfIndex?
usdFt1NextIfIndex returns the next available ifIndex value to use when creating a new entry in usdFt1IfTable, or zero if no valid ifIndex is available. An admin or management application reads this immediately before creating a new fractional T1 interface, since successive GETs return different values to avoid collisions between multiple managers creating interfaces simultaneously. For example, a provisioning tool GETs usdFt1NextIfIndex, receives the value 145, and then uses 145 as usdFt1IfIndex when creating the new FT1 interface row.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.6.1.1 snmpwalk -v2c -c public <target> Unisphere-Data-FRACTIONAL-T1-MIB::usdFt1NextIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.6.1.1.1 snmpget -v2c -c public <target> Unisphere-Data-FRACTIONAL-T1-MIB::usdFt1NextIfIndex.1
Start monitoring Unisphere Networks / Juniper ERX edge routers (fractional-T1 channel/loopback config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Unisphere-Data-FRACTIONAL-T1-MIB::usdFt1NextIfIndex OID value, configure state conditions and alerts, and monitor any Unisphere Networks / Juniper ERX edge routers (fractional-T1 channel/loopback config status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.6 | juniFt1MIB | Juniper-FRACTIONAL-T1-MIB |
| 1.3.6.1.4.1.4874.2.2.6.1 | juniFt1Objects | Juniper-FRACTIONAL-T1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.6.1.1 | usdFt1NextIfIndex | Unisphere-Data-FRACTIONAL-T1-MIB |