-- ***************************************************************** -- Unisphere-Data-FRACTIONAL-T1-MIB -- -- Unisphere Networks Inc. Enterprise MIB -- Fractional T1 MIB -- -- Copyright (c) 1998, 1999 Redstone Communications, Incorporated. -- Copyright (c) 1999, 2002 Unisphere Networks, Incorporated. -- All Rights Reserved. -- ***************************************************************** Unisphere-Data-FRACTIONAL-T1-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB usDataMibs FROM Unisphere-Data-MIBs UsdNextIfIndex, UsdTimeSlotMap FROM Unisphere-Data-TC; usdFt1MIB MODULE-IDENTITY LAST-UPDATED "200009261730Z" -- 26-Sep-00 1:50 PM EDT ORGANIZATION "Unisphere Networks, Inc." CONTACT-INFO " Unisphere Networks, Inc. Postal: 10 Technology Park Drive Westford MA 01886 USA Tel: +1 978 589 5800 Email: mib@UnisphereNetworks.com" DESCRIPTION "The Fractional T1 MIB for the Unisphere Networks Inc. enterprise." -- Revision History REVISION "200009261730Z" -- 26-Sep-00 1:50 PM EDT kwc DESCRIPTION "Make it SMIv2 conformant." REVISION "9907140000Z" -- 14-Jul-99 DESCRIPTION "Obsoleted usdFt1IfDataPolarity and updated corresponding compliances." REVISION "9811130000Z" -- 13-Nov-98 DESCRIPTION "Initial version of this MIB module." ::= { usDataMibs 6 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Textual conventions -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No textual conventions are defined in this MIB -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ usdFt1Objects OBJECT IDENTIFIER ::= { usdFt1MIB 1 } -- -- This MIB contains managed objects for Fractional T1 arrangements. -- Management objects are provided to query for an available -- interface index, and to create/delete interfaces of this type. -- Creating/deleting this interface type using this MIB has -- the side effect of creating/deleting corresponding entries -- in the Interface MIB ifTable/ifXTable, and in the Unisphere -- Enterprise Interface MIB usdIfTable. -- -- ////////////////////////////////////////////////////////////////////// -- -- Fractional T1 Interfaces -- -- ////////////////////////////////////////////////////////////////////// -- -- IfIndex selection for creating new FT1 interfaces -- usdFt1NextIfIndex OBJECT-TYPE SYNTAX UsdNextIfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Coordinate ifIndex value allocation for entries in usdFt1IfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. " ::= { usdFt1Objects 1 } -- -- The FT1 Interface Table -- usdFt1IfTable OBJECT-TYPE SYNTAX SEQUENCE OF UsdFt1IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for FT1 interfaces present in the system." ::= { usdFt1Objects 2 } usdFt1IfEntry OBJECT-TYPE SYNTAX UsdFt1IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes the characteristics of an FT1 interface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/usdIfTable." INDEX { usdFt1IfIndex } ::= { usdFt1IfTable 1 } UsdFt1IfEntry ::= SEQUENCE { usdFt1IfIndex InterfaceIndex, usdFt1IfRowStatus RowStatus, usdFt1IfLowerIfIndex InterfaceIndexOrZero, usdFt1IfTimeSlotMap UsdTimeSlotMap, usdFt1IfTimeSlotRate INTEGER, usdFt1IfDataPolarity INTEGER, usdFt1IfLoopbackConfig INTEGER } usdFt1IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the FT1 interface. When creating entries in this table, suitable values for this object are determined by reading usdFt1NextIfIndex." ::= { usdFt1IfEntry 1 } usdFt1IfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdFt1IfRowStatus usdFt1IfLowerIfIndex usdFt1IfTimeSlotMap In addition, when creating an entry the following conditions must hold: A value for usdFt1IfIndex must have been determined previously, by reading usdFt1NextIfIndex. The DS1 interface identified by usdFt1IfLowerIfIndex must exist. The DS0s specified in usdFt1IfTimeSlotMap must be available (unallocated) on the DS1 interface identified by usdFt1IfLowerIfIndex. A corresponding entry in ifTable/ifXTable/usdIfTable is created/destroyed as a result of creating/destroying an entry in this table. " ::= { usdFt1IfEntry 2 } usdFt1IfLowerIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of a DS1 interface over which this FT1 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation." ::= { usdFt1IfEntry 3 } usdFt1IfTimeSlotMap OBJECT-TYPE SYNTAX UsdTimeSlotMap MAX-ACCESS read-create STATUS current DESCRIPTION "A bitmap representing the DS0s on the underlying DS1 interface that have been allocated to this FT1 interface." ::= { usdFt1IfEntry 4 } usdFt1IfTimeSlotRate OBJECT-TYPE SYNTAX INTEGER { nx56kbps(0), nx64kbps(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Data rate per time slot allocated to this FT1 interface." DEFVAL { nx64kbps } ::= { usdFt1IfEntry 5 } usdFt1IfDataPolarity OBJECT-TYPE SYNTAX INTEGER { normal(0), inverted(1) } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Polarity of data transmitted on this FT1 interface. Inverted data is used for certain line coding configurations to ensure sufficient one's density for timing recovery by the remote end." DEFVAL { normal } ::= { usdFt1IfEntry 6 } usdFt1IfLoopbackConfig OBJECT-TYPE SYNTAX INTEGER { noLoop(0), loop(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Selects loopback configuration. loop(1) causes received data to be looped back out the transmitter." DEFVAL { noLoop } ::= { usdFt1IfEntry 7 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notification control objects -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholder follows. -- usdFt1TrapControl OBJECT IDENTIFIER ::= { usdFt1MIB 2 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholder follows. -- The following two OBJECT IDENTIFIERS are used to define SNMPv2 -- Notifications that are easily translated into SNMPv1 Traps. -- usdFt1Traps OBJECT IDENTIFIER ::= { usdFt1MIB 3 } -- usdFt1TrapPrefix OBJECT IDENTIFIER ::= { usdFt1Traps 0 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ usdFt1Conformance OBJECT IDENTIFIER ::= { usdFt1MIB 4 } usdFt1Compliances OBJECT IDENTIFIER ::= { usdFt1Conformance 1 } usdFt1Groups OBJECT IDENTIFIER ::= { usdFt1Conformance 2 } -- compliance statements usdFt1Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for entities that implement the Unisphere FT1 MIB." MODULE -- this module MANDATORY-GROUPS { usdFt1Group } ::= { usdFt1Compliances 1 } usdFt1Compliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities that implement the Unisphere FT1 MIB." MODULE -- this module MANDATORY-GROUPS { usdFt1Group2 } ::= { usdFt1Compliances 2 } -- units of conformance usdFt1Group OBJECT-GROUP OBJECTS { usdFt1NextIfIndex, usdFt1IfRowStatus, usdFt1IfLowerIfIndex, usdFt1IfTimeSlotMap, usdFt1IfTimeSlotRate, usdFt1IfDataPolarity, usdFt1IfLoopbackConfig } STATUS obsolete DESCRIPTION "A collection of objects providing management of FT1 interfaces in a Unisphere product." ::= { usdFt1Groups 1 } usdFt1Group2 OBJECT-GROUP OBJECTS { usdFt1NextIfIndex, usdFt1IfRowStatus, usdFt1IfLowerIfIndex, usdFt1IfTimeSlotMap, usdFt1IfTimeSlotRate, usdFt1IfLoopbackConfig } STATUS current DESCRIPTION "A collection of objects providing management of FT1 interfaces in a Unisphere product." ::= { usdFt1Groups 2 } END