All MIBs › UTM-MIB
Category: Network Security and UTM
Description: Manages unified threat management firewall, IPS, antivirus, and web filter policy statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is UTM-MIB?
UTM-MIB is a Siemens (Siemens Nixdorf, sni enterprise 231) MIB for openUTM, Siemens' Universal Transaction Monitor middleware for BS2000/OSD mainframe and Unix transaction-processing systems — a very different product from the "Unified Threat Management" firewall/IPS category the name might suggest, and administrators should not confuse the two. The module models a UTM application table (name, up/down status, shared-memory key/segment size, semaphore ID, home directory) and a rich statistics group mirroring the output of the KDCINF STATISTICS operator command: cold-start time, terminal message throughput, current tasks and connected users, dialog/asynchronous conversation counts and transaction rates, page-pool occupancy and cache hit rate, deadlocks, periodic writes, and job-receiving conversation peaks. It further exposes system parameter tables (accounting, SM2 feed, test mode, resource-wait timeouts, max tasks) and detailed session-object tables for physical terminals (utmPtermTable), logical terminals (utmLtermTable), transaction codes and TAC classes (utmTacTable, utmTacclassTable), logged-in users (utmUserTable), inter-application connections (utmConTable), and LU6.1 remote-application links (utmLpapTable), each carrying connection/lock status, usage counters, and security-violation counts. This gives an operator deep visibility into openUTM application health, transaction throughput, and terminal/session state on the underlying mainframe or Unix host. It is deployed on Siemens/Fujitsu BS2000-OSD mainframes and Unix systems running openUTM, and administrators can look up the UTM-MIB when monitoring openUTM transaction-processing applications.
IPNetwork Monitor allows you to monitor SNMP objects defined in UTM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Siemens/Fujitsu BS2000-OSD mainframes and Unix hosts running openUTM
Monitoring Examples
An operator polls utmStatCurrTasks and utmStatDeadlocks in utmStatData to check for resource contention on a running UTM application, and cross-references utmTacTable's utmTacInq (queued messages) and utmTacError (failed program-unit runs) for a specific transaction code; a TAC showing a growing utmTacInq alongside rising utmTacError counts would point to a stuck or failing program unit backing up transaction throughput for the whole application.
What Can Be Monitored
- UTM application up/down status
- current tasks, connected users, and transaction rates
- page-pool occupancy and cache hit rate
- transaction-code (TAC) queue depth and error counts
- physical/logical terminal connection and security-violation counts
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Gauge | |
| enterprises |
From RFC1213-MIB
| DisplayString |
From SNMPv2-TC
| DateAndTime |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| sni | 1.3.6.1.4.1.231 | |||
| sniProductMibs | 1.3.6.1.4.1.231.2 | |||
| sniUTM | 1.3.6.1.4.1.231.2.19 | |||
| INT utmApplTabNum | 1.3.6.1.4.1.231.2.19.1 | INTEGER | read-only | The number of entries in the table utmApplTable |
| utmApplTable | 1.3.6.1.4.1.231.2.19.2 | not-accessible | Table of UTM applications | |
| utmApplEntry | 1.3.6.1.4.1.231.2.19.2.1 | not-accessible | An entry in the table | |
| INT utmApplIndex | 1.3.6.1.4.1.231.2.19.2.1.1 | INTEGER | read-only | A unique value for each entry, its value ranges between 1 and the value of utmApplTabNum |
| STR utmApplName | 1.3.6.1.4.1.231.2.19.2.1.2 | DisplayString | read-only | Name of the UTM application |
| INT utmApplStatus | 1.3.6.1.4.1.231.2.19.2.1.3 | INTEGER | read-only | Status of the UTM application is either up or down |
| GAU utmApplSharedMemKey | 1.3.6.1.4.1.231.2.19.2.1.4 | Gauge | read-only | Shared memory key of the UTM application |
| GAU utmApplSharedMemSegSize | 1.3.6.1.4.1.231.2.19.2.1.5 | Gauge | read-only | Size of the shared memory segement of the UTM application |
| GAU utmApplSemId | 1.3.6.1.4.1.231.2.19.2.1.6 | Gauge | read-only | Semaphore ID number of the UTM application |
| STR utmApplHomeDir | 1.3.6.1.4.1.231.2.19.2.1.7 | DisplayString | read-only | Home directory of the UTM application |
| utmApplicationData | 1.3.6.1.4.1.231.2.19.3 | |||
| NTF utmApplAborted | 1.3.6.1.4.1.231.2.19.3.0.1 | Application terminated | ||
| NTF utmApplPENDER | 1.3.6.1.4.1.231.2.19.3.0.2 | Termination with PEND ER | ||
| NTF utmApplDeadlock | 1.3.6.1.4.1.231.2.19.3.0.3 | Detected and resolved deadlock | ||
| NTF utmApplUserSecurityViolations | 1.3.6.1.4.1.231.2.19.3.0.4 | User security violations | ||
| NTF utmApplConnectionLosses | 1.3.6.1.4.1.231.2.19.3.0.5 | Connection losses to partner applications | ||
| NTF utmApplConnectedUsers | 1.3.6.1.4.1.231.2.19.3.0.6 | Connected users | ||
| NTF utmApplActiveTasks | 1.3.6.1.4.1.231.2.19.3.0.7 | Active tasks | ||
| NTF utmApplCacheHits | 1.3.6.1.4.1.231.2.19.3.0.8 | Cache hit rate | ||
| NTF utmApplPoolSize | 1.3.6.1.4.1.231.2.19.3.0.9 | Page pool size | ||
| NTF utmApplTacclassWaitMsgs | 1.3.6.1.4.1.231.2.19.3.0.10 | Unprocessed messages for TAC classes | ||
| NTF utmApplLtermWaitOutpMsgs | 1.3.6.1.4.1.231.2.19.3.0.11 | Messages waiting to be output on logical terminals | ||
| utmMainData | 1.3.6.1.4.1.231.2.19.3.1 | |||
| STR utmMainApplName | 1.3.6.1.4.1.231.2.19.3.1.1 | DisplayString | read-write | Name of the selected UTM application |
| STR utmMainBCAMAppl | 1.3.6.1.4.1.231.2.19.3.1.2 | DisplayString | read-write | BCAM application name of the selected UTM application |
| STR utmMainUTMversion | 1.3.6.1.4.1.231.2.19.3.1.3 | DisplayString | read-only | UTM version |
| INT utmMainApplStartStop | 1.3.6.1.4.1.231.2.19.3.1.4 | INTEGER | read-write | Reading: status of selected UTM application; writing: start (START) or terminate (STOP) selected UTM application |
| STR utmMainApplHomeDir | 1.3.6.1.4.1.231.2.19.3.1.5 | DisplayString | read-only | Home directory of the selected application |
| STR utmMainSubagentVersion | 1.3.6.1.4.1.231.2.19.3.1.6 | DisplayString | read-only | Version number of the SNMP subagent and the type of operating system |
| utmStatData | 1.3.6.1.4.1.231.2.19.3.2 | |||
| DAT utmStatStartDateAndTime | 1.3.6.1.4.1.231.2.19.3.2.1 | DateAndTime | read-only | Date and time of the last cold start of the application |
| STR utmStatStartDateAndTimeString | 1.3.6.1.4.1.231.2.19.3.2.2 | DisplayString | read-only | Date and time of the last cold start of the application |
| INT utmStatTermInMsgs | 1.3.6.1.4.1.231.2.19.3.2.3 | INTEGER | read-only | Number of messages entered on all terminals since the completion of the last hour |
| INT utmStatTermOutMsgs | 1.3.6.1.4.1.231.2.19.3.2.4 | INTEGER | read-only | Number of messages issued on all terminals since the completion of the last hour |
| INT utmStatCurrTasks | 1.3.6.1.4.1.231.2.19.3.2.5 | INTEGER | read-only | Number of current tasks in this application |
| INT utmStatConnUsers | 1.3.6.1.4.1.231.2.19.3.2.6 | INTEGER | read-only | Number of connected users |
| INT utmStatOpenDialConv | 1.3.6.1.4.1.231.2.19.3.2.7 | INTEGER | read-only | Number of active dialog conversations |
| INT utmStatOpenAsynConv | 1.3.6.1.4.1.231.2.19.3.2.8 | INTEGER | read-only | Number of active asynchronous conversations |
| GAU utmStatDialTAperSec | 1.3.6.1.4.1.231.2.19.3.2.9 | Gauge | read-only | Number of dialog transactions per second |
| GAU utmStatAsynTAperSec | 1.3.6.1.4.1.231.2.19.3.2.10 | Gauge | read-only | Number of asynchronous transactions per second |
| GAU utmStatDialStepSec | 1.3.6.1.4.1.231.2.19.3.2.11 | Gauge | read-only | Number of dialog steps per second |
| GAU utmStatMaxPoolSize | 1.3.6.1.4.1.231.2.19.3.2.12 | Gauge | read-only | Maximum occupancy of the pagepool in percent |
| GAU utmStatActPoolSize | 1.3.6.1.4.1.231.2.19.3.2.13 | Gauge | read-only | Current occupancy of the pagepool in percent |
| GAU utmStatAvgPoolSize | 1.3.6.1.4.1.231.2.19.3.2.14 | Gauge | read-only | Average occupancy of the pagepool in percent |
| GAU utmStatCacheHitRate | 1.3.6.1.4.1.231.2.19.3.2.15 | Gauge | read-only | Hit rate in percent when searching a cache page |
| GAU utmStatCacheWaits | 1.3.6.1.4.1.231.2.19.3.2.16 | Gauge | read-only | Percentage of cache buffer requests leading to a waiting time |
| INT utmStatUnprocAtacs | 1.3.6.1.4.1.231.2.19.3.2.17 | INTEGER | read-only | Number of asynchronous transaction jobs, which are not yet processed |
| INT utmStatUnprocPrints | 1.3.6.1.4.1.231.2.19.3.2.18 | INTEGER | read-only | Number of waiting print jobs |
| INT utmStatWaitDPUTs | 1.3.6.1.4.1.231.2.19.3.2.19 | INTEGER | read-only | Number of pending time driven jobs |
| INT utmStatAbTermConv | 1.3.6.1.4.1.231.2.19.3.2.20 | INTEGER | read-only | Number of abnormally terminated conversations |
| GAU utmStatResourcWaits | 1.3.6.1.4.1.231.2.19.3.2.21 | Gauge | read-only | Relation (per mille) between the number of resources requests with waiting and the total number of resources requests |
| INT utmStatDeadlocks | 1.3.6.1.4.1.231.2.19.3.2.22 | INTEGER | read-only | Number of recognized and removed deadlocks |
| INT utmStatPeriodWrites | 1.3.6.1.4.1.231.2.19.3.2.23 | INTEGER | read-only | Number of periodic writes |
| INT utmStatPagesPWrite | 1.3.6.1.4.1.231.2.19.3.2.24 | INTEGER | read-only | Number of 2 KB pages being averagely saved by a periodic write |
| INT utmStatLogWrites | 1.3.6.1.4.1.231.2.19.3.2.25 | INTEGER | read-only | Number of write jobs to the user log file since the completion of the last hour |
| INT utmStatActJR | 1.3.6.1.4.1.231.2.19.3.2.26 | INTEGER | read-only | Current number of job receiving conversations, which are addressed at the same time |
| INT utmStatMaxJR | 1.3.6.1.4.1.231.2.19.3.2.27 | INTEGER | read-only | Maximum number of job receiving conversations, which have been addressed at the same time since KDCDEF generation |
| utmSyspData | 1.3.6.1.4.1.231.2.19.3.3 | |||
| INT utmSyspAccount | 1.3.6.1.4.1.231.2.19.3.3.1 | INTEGER | read-write | UTM accounting is either activated (ON) or not activated (OFF) |
| INT utmSyspCalcAccount | 1.3.6.1.4.1.231.2.19.3.3.2 | INTEGER | read-write | The calculation phase of UTM accounting is either activated (ON) or not activated (OFF) |
| INT utmSyspSM2 | 1.3.6.1.4.1.231.2.19.3.3.3 | INTEGER | read-write | The delivery of data to SM2 is either activated (ON) or not activated (OFF) |
| INT utmSyspKDCMON | 1.3.6.1.4.1.231.2.19.3.3.4 | INTEGER | read-write | KDCMON is either activated (ON) or not activated (OFF) |
| INT utmSyspTestmode | 1.3.6.1.4.1.231.2.19.3.3.5 | INTEGER | read-write | Test mode is either activated (ON) or not activated (OFF) |
| GAU utmSyspMaxPagRate | 1.3.6.1.4.1.231.2.19.3.3.6 | Gauge | read-write | Percentage of cache pages which are to be written to KDCFILE in case of a bottleneck |
| INT utmSyspProgFGG | 1.3.6.1.4.1.231.2.19.3.3.7 | INTEGER | read-write | read: Number of the current file generation of the program write: -1 => old (load lower program generation) +1 => new (load higher program generation) |
| INT utmSyspTermWait | 1.3.6.1.4.1.231.2.19.3.3.8 | INTEGER | read-write | Maximum elapse time (seconds) between terminal output and the following input of the terminal user during a multi step conversation |
| INT utmSyspUsLogFGG | 1.3.6.1.4.1.231.2.19.3.3.9 | INTEGER | read-write | Number of the current file generation of the user log file |
| INT utmSyspResWaitTA | 1.3.6.1.4.1.231.2.19.3.3.10 | INTEGER | read-write | Maximum waiting time in seconds for a resource locked by another transaction |
| INT utmSyspMaxTasks | 1.3.6.1.4.1.231.2.19.3.3.11 | INTEGER | read-write | Maximum number of tasks which are allowed in this application |
| INT utmSyspResWaitPr | 1.3.6.1.4.1.231.2.19.3.3.12 | INTEGER | read-write | Maximum waiting time in seconds for a resource locked by another process |
| INT utmSyspCurrTasks | 1.3.6.1.4.1.231.2.19.3.3.13 | INTEGER | read-only | Number of current work processes of the application |
| INT utmSyspConRTime | 1.3.6.1.4.1.231.2.19.3.3.14 | INTEGER | read-write | Cycle in minutes, in which UTM retries to create a logical connection |
| INT utmSyspMaxAsynTasks | 1.3.6.1.4.1.231.2.19.3.3.15 | INTEGER | read-write | Maximum number of tasks for asynchronous programs |
| INT utmSyspLogAckwait | 1.3.6.1.4.1.231.2.19.3.3.16 | INTEGER | read-only | Maximum waiting time in seconds for a print or transport acknowledgement |
| INT utmSyspPTCTime | 1.3.6.1.4.1.231.2.19.3.3.17 | INTEGER | read-write | Maximum waiting time in seconds of a job receiving conversation in PTC for acknowledgement |
| INT utmSyspConcTime | 1.3.6.1.4.1.231.2.19.3.3.18 | INTEGER | read-write | Time in seconds permitted for creation of a session or an association |
| INT utmSyspPGWTTime | 1.3.6.1.4.1.231.2.19.3.3.19 | INTEGER | read-write | Maximum time in seconds permitted for the KDCS call PGWT |
| INT utmSyspTasksWaitPGWT | 1.3.6.1.4.1.231.2.19.3.3.20 | INTEGER | read-only | Current number of tasks being in a wait state by a PGWT call |
| INT utmSyspTasksinPGWT | 1.3.6.1.4.1.231.2.19.3.3.21 | INTEGER | read-write | Maximum number of task for PGWT calls |
| utmPtermData | 1.3.6.1.4.1.231.2.19.3.4 | |||
| INT utmPtermTabNum | 1.3.6.1.4.1.231.2.19.3.4.1 | INTEGER | read-only | The number of entries in the table utmPtermTable |
| utmPtermTable | 1.3.6.1.4.1.231.2.19.3.4.2 | not-accessible | Table of all physical terminals | |
| utmPtermEntry | 1.3.6.1.4.1.231.2.19.3.4.2.1 | not-accessible | An entry in the table | |
| INT utmPtermIndex | 1.3.6.1.4.1.231.2.19.3.4.2.1.1 | INTEGER | read-only | A unique value for each entry, its value ranges between 1 and the value of utmPtermTabNum |
| STR utmPtermName | 1.3.6.1.4.1.231.2.19.3.4.2.1.2 | DisplayString | read-only | Name of the chosen physical terminal |
| STR utmPtermProname | 1.3.6.1.4.1.231.2.19.3.4.2.1.3 | DisplayString | read-write | Processor name of the physical terminal (or blank for local devices) |
| STR utmPtermLterm | 1.3.6.1.4.1.231.2.19.3.4.2.1.4 | DisplayString | read-write | Name of the logical UTM terminal that belongs to the physical terminal |
| STR utmPtermBCAMAppl | 1.3.6.1.4.1.231.2.19.3.4.2.1.5 | DisplayString | read-write | BCAM name of the UTM application |
| STR utmPtermPtyp | 1.3.6.1.4.1.231.2.19.3.4.2.1.6 | DisplayString | read-only | Partner type of the UTM terminal |
| INT utmPtermStatus | 1.3.6.1.4.1.231.2.19.3.4.2.1.7 | INTEGER | read-write | The UTM terminal is either locked (off) or unlocked (on) |
| INT utmPtermConnected | 1.3.6.1.4.1.231.2.19.3.4.2.1.8 | INTEGER | read-write | The UTM terminal is either connected (yes) or not connected (no) or waiting for connection |
| INT utmPtermConnectStatus | 1.3.6.1.4.1.231.2.19.3.4.2.1.9 | INTEGER | read-write | Status = 'A' means automatic connection at application start, status = 'P' means a terminalpool connection |
| INT utmPtermConnectForced | 1.3.6.1.4.1.231.2.19.3.4.2.1.10 | INTEGER | read-only | Like automatic connection but also forces a existing connection to the terminal to be cut |
| INT utmPtermConnectMultiplexed | 1.3.6.1.4.1.231.2.19.3.4.2.1.11 | INTEGER | read-only | The terminal uses either a multiplex connection or not |
| INT utmPtermConTime | 1.3.6.1.4.1.231.2.19.3.4.2.1.12 | INTEGER | read-only | Duration of existing connection in minutes |
| INT utmPtermLett | 1.3.6.1.4.1.231.2.19.3.4.2.1.13 | INTEGER | read-only | Number of messages input and output at the terminal since the start of the application |
| INT utmPtermConb | 1.3.6.1.4.1.231.2.19.3.4.2.1.14 | INTEGER | read-only | Number of breakdowns of the physical or virtual connection between this terminal and the application since the start of the application |
| utmLtermData | 1.3.6.1.4.1.231.2.19.3.5 | |||
| INT utmLtermTabNum | 1.3.6.1.4.1.231.2.19.3.5.1 | INTEGER | read-only | The number of entries in the table utmLtermTable |
| utmLtermTable | 1.3.6.1.4.1.231.2.19.3.5.2 | not-accessible | Table of all logical UTM terminals | |
| utmLtermEntry | 1.3.6.1.4.1.231.2.19.3.5.2.1 | not-accessible | An entry in the table | |
| INT utmLtermIndex | 1.3.6.1.4.1.231.2.19.3.5.2.1.1 | INTEGER | read-only | A unique value for each entry, its value ranges between 1 and the value of utmLtermTabNum |
| STR utmLtermName | 1.3.6.1.4.1.231.2.19.3.5.2.1.2 | DisplayString | read-only | Name of the chosen logical UTM terminal |
| STR utmLtermPterm | 1.3.6.1.4.1.231.2.19.3.5.2.1.3 | DisplayString | read-write | Name of the physical terminal that belongs to the logical UTM terminal |
| STR utmLtermUser | 1.3.6.1.4.1.231.2.19.3.5.2.1.4 | DisplayString | read-only | Login name of the user currently connected to the logical UTM terminal |
| STR utmLtermKset | 1.3.6.1.4.1.231.2.19.3.5.2.1.5 | DisplayString | read-only | Key set of the UTM terminal |
| INT utmLtermLock | 1.3.6.1.4.1.231.2.19.3.5.2.1.6 | INTEGER | read-only | Lock of the UTM-terminal |
| INT utmLtermUsageType | 1.3.6.1.4.1.231.2.19.3.5.2.1.7 | INTEGER | read-only | Type is 'D' (dialog terminal) or 'O' (output terminal) |
| INT utmLtermUsageBundle | 1.3.6.1.4.1.231.2.19.3.5.2.1.8 | INTEGER | read-only | The UTM terminal is a pool ('bundle') if 'B' is set |
| INT utmLtermUsageTermPool | 1.3.6.1.4.1.231.2.19.3.5.2.1.9 | INTEGER | read-only | The UTM terminal is generated for a terminal pool if 'P' is set |
| INT utmLtermStatus | 1.3.6.1.4.1.231.2.19.3.5.2.1.10 | INTEGER | read-write | The status of the UTM terminal is either 'ON' or 'OFF' |
| INT utmLtermOutq | 1.3.6.1.4.1.231.2.19.3.5.2.1.11 | INTEGER | read-only | Number of messages that still have to be output to this terminal |
| INT utmLtermInCnt | 1.3.6.1.4.1.231.2.19.3.5.2.1.12 | INTEGER | read-only | Number of messages input at this terminal since the start of the application; for printers, it's the number of print acknowledgments |
| INT utmLtermSecCnt | 1.3.6.1.4.1.231.2.19.3.5.2.1.13 | INTEGER | read-only | Number of security violations at this logical terminal since the start of the application |
| utmTacData | 1.3.6.1.4.1.231.2.19.3.6 | |||
| INT utmTacTabNum | 1.3.6.1.4.1.231.2.19.3.6.1 | INTEGER | read-only | The number of entries in the table utmTacTable |
| utmTacTable | 1.3.6.1.4.1.231.2.19.3.6.2 | not-accessible | Table including infos about all transaction codes | |
| utmTacEntry | 1.3.6.1.4.1.231.2.19.3.6.2.1 | not-accessible | An entry in the table | |
| INT utmTacIndex | 1.3.6.1.4.1.231.2.19.3.6.2.1.1 | INTEGER | read-only | A unique value for each entry, its value ranges between 1 and the value of utmTacTabNum |
| STR utmTacName | 1.3.6.1.4.1.231.2.19.3.6.2.1.2 | DisplayString | read-only | Name of the chosen transaction code |
| INT utmTacLock | 1.3.6.1.4.1.231.2.19.3.6.2.1.3 | INTEGER | read-only | Lock of the transaction code (0 through 255) |
| INT utmTacStatus | 1.3.6.1.4.1.231.2.19.3.6.2.1.4 | INTEGER | read-write | The status of the transaction code is either 'on', 'off' or locked ('halt') |
| INT utmTacTcl | 1.3.6.1.4.1.231.2.19.3.6.2.1.5 | INTEGER | read-only | TAC class of this transaction code |
| INT utmTacInq | 1.3.6.1.4.1.231.2.19.3.6.2.1.6 | INTEGER | read-only | Number of messages still to be processed by the program unit run designated by transaction code |
| INT utmTacUsed | 1.3.6.1.4.1.231.2.19.3.6.2.1.7 | INTEGER | read-only | Number of program unit runs with this transaction code processed since the initial start of the application (only for asynchronous TAC's) |
| INT utmTacError | 1.3.6.1.4.1.231.2.19.3.6.2.1.8 | INTEGER | read-only | Number of program unit runs with this transaction code terminated with errors since the initial start of the application |
| INT utmTacDbcnt | 1.3.6.1.4.1.231.2.19.3.6.2.1.9 | INTEGER | read-only | Always '0' if XA-interface is used |
| INT utmTacElap | 1.3.6.1.4.1.231.2.19.3.6.2.1.10 | INTEGER | read-only | Average runtime in milliseconds of program units with this transaction code |
| INT utmTacDbElap | 1.3.6.1.4.1.231.2.19.3.6.2.1.11 | INTEGER | read-only | Average time in milliseconds spent processing the database calls in the program unit runs with this transaction code |
| INT utmTacCpu | 1.3.6.1.4.1.231.2.19.3.6.2.1.12 | INTEGER | read-only | Average CPU time in milliseconds spent in the UTM program run for processing this transaction code |
| utmTacclassData | 1.3.6.1.4.1.231.2.19.3.7 | |||
| utmTacclassTable | 1.3.6.1.4.1.231.2.19.3.7.1 | not-accessible | Table including infos about all TAC-classes | |
| utmTacclassEntry | 1.3.6.1.4.1.231.2.19.3.7.1.1 | not-accessible | An entry in the table | |
| INT utmTacclassNumber | 1.3.6.1.4.1.231.2.19.3.7.1.1.1 | INTEGER | read-only | TAC class number |
| INT utmTacclassTasks | 1.3.6.1.4.1.231.2.19.3.7.1.1.2 | INTEGER | read-write | Maximum number of tasks that can currently work for a specific TAC class |
| INT utmTacclassWtMesg | 1.3.6.1.4.1.231.2.19.3.7.1.1.3 | INTEGER | read-only | Number of messages for a specific TAC class currently buffered and not yet processed |
| INT utmTacclassAvgWtTime | 1.3.6.1.4.1.231.2.19.3.7.1.1.4 | INTEGER | read-only | Average wait times in milliseconds for all dialog TAC classes (1 through 8) |
| INT utmTacclassPGWT | 1.3.6.1.4.1.231.2.19.3.7.1.1.5 | INTEGER | read-only | Indicates whether program units containing a PGWT call can run in a specific TAC class |
| utmUserData | 1.3.6.1.4.1.231.2.19.3.8 | |||
| INT utmUserTabNum | 1.3.6.1.4.1.231.2.19.3.8.1 | INTEGER | read-only | The number of entries in the table utmUserTable |
| utmUserTable | 1.3.6.1.4.1.231.2.19.3.8.2 | not-accessible | Table including infos about all users | |
| utmUserEntry | 1.3.6.1.4.1.231.2.19.3.8.2.1 | not-accessible | An entry in the table | |
| INT utmUserIndex | 1.3.6.1.4.1.231.2.19.3.8.2.1.1 | INTEGER | read-only | A unique value for each entry, its value ranges between 1 and the value of utmUserTabNum |
| STR utmUserName | 1.3.6.1.4.1.231.2.19.3.8.2.1.2 | DisplayString | read-only | Name of the user |
| STR utmUserKset | 1.3.6.1.4.1.231.2.19.3.8.2.1.3 | DisplayString | read-only | Key set assigned to users login name |
| INT utmUserStatus | 1.3.6.1.4.1.231.2.19.3.8.2.1.4 | INTEGER | read-write | Login name is either locked (off) or unlocked (on) |
| INT utmUserInVg | 1.3.6.1.4.1.231.2.19.3.8.2.1.5 | INTEGER | read-only | Determines if the user is currently processing a conversation |
| INT utmUserNrTacs | 1.3.6.1.4.1.231.2.19.3.8.2.1.6 | INTEGER | read-only | Number of transaction jobs entered by the user since the initial start of the application |
| INT utmUserCpuTime | 1.3.6.1.4.1.231.2.19.3.8.2.1.7 | INTEGER | read-only | Number of seconds spent in processing transaction jobs for the user (excluding database calls) |
| INT utmUserSecCnt | 1.3.6.1.4.1.231.2.19.3.8.2.1.8 | INTEGER | read-only | Number of security violations for the login name since the start of the application |
| STR utmUserLterm | 1.3.6.1.4.1.231.2.19.3.8.2.1.9 | DisplayString | read-only | Name of the logical terminal through witch the user of the UTM application logged on |
| utmConData | 1.3.6.1.4.1.231.2.19.3.9 | |||
| INT utmConTabNum | 1.3.6.1.4.1.231.2.19.3.9.1 | INTEGER | read-only | The number of entries in the table utmConTable |
| utmConTable | 1.3.6.1.4.1.231.2.19.3.9.2 | not-accessible | Table including infos about all connections | |
| utmConEntry | 1.3.6.1.4.1.231.2.19.3.9.2.1 | not-accessible | An entry in the table | |
| INT utmConIndex | 1.3.6.1.4.1.231.2.19.3.9.2.1.1 | INTEGER | read-only | A unique value for each entry, its value ranges between 1 and the value of utmConTabNum |
| STR utmConName | 1.3.6.1.4.1.231.2.19.3.9.2.1.2 | DisplayString | read-only | Name of the connection |
| STR utmConProname | 1.3.6.1.4.1.231.2.19.3.9.2.1.3 | DisplayString | read-only | Processor name |
| STR utmConLpap | 1.3.6.1.4.1.231.2.19.3.9.2.1.4 | DisplayString | read-only | Name of the remote application in the local application |
| STR utmConBcamAppl | 1.3.6.1.4.1.231.2.19.3.9.2.1.5 | DisplayString | read-only | BCAM name of the UTM application |
| INT utmConStatus | 1.3.6.1.4.1.231.2.19.3.9.2.1.6 | INTEGER | read-write | A connection to the remote application exists or can be set up (on), or cannot be set up (off) |
| INT utmConConnected | 1.3.6.1.4.1.231.2.19.3.9.2.1.7 | INTEGER | read-write | A connection is either established (yes) or not (no) or UTM is just establishing a connection (waiting) |
| INT utmConConnectStatus | 1.3.6.1.4.1.231.2.19.3.9.2.1.8 | INTEGER | read-write | An 'A' means automatic connection setup at start of application |
| INT utmConConTime | 1.3.6.1.4.1.231.2.19.3.9.2.1.9 | INTEGER | read-only | Duration of connection in minutes |
| INT utmConLett | 1.3.6.1.4.1.231.2.19.3.9.2.1.10 | INTEGER | read-only | Number of messages input and output through the connection |
| INT utmConConb | 1.3.6.1.4.1.231.2.19.3.9.2.1.11 | INTEGER | read-only | Number of breakdowns of the connection since the start of the application |
| utmLpapData | 1.3.6.1.4.1.231.2.19.3.10 | |||
| INT utmLpapTabNum | 1.3.6.1.4.1.231.2.19.3.10.1 | INTEGER | read-only | The number of entries in the table utmLpapTable |
| utmLpapTable | 1.3.6.1.4.1.231.2.19.3.10.2 | not-accessible | Table including infos about all remote applications communicating with LU6.1 | |
| utmLpapEntry | 1.3.6.1.4.1.231.2.19.3.10.2.1 | not-accessible | An entry in the table | |
| INT utmLpapIndex | 1.3.6.1.4.1.231.2.19.3.10.2.1.1 | INTEGER | read-only | A unique value for each entry, its value ranges between 1 and the value of utmLpapTabNum |
| STR utmLpapName | 1.3.6.1.4.1.231.2.19.3.10.2.1.2 | DisplayString | read-only | Name of the LPAP |
| STR utmLpapKset | 1.3.6.1.4.1.231.2.19.3.10.2.1.3 | DisplayString | read-only | Key set of the remote application |
| INT utmLpapStatus | 1.3.6.1.4.1.231.2.19.3.10.2.1.4 | INTEGER | read-write | A connection to the remote application exists or can be set up (on), or cannot be set up (off) |
| INT utmLpapQuiet | 1.3.6.1.4.1.231.2.19.3.10.2.1.5 | INTEGER | read-write | A 'Q' means 'quiet', i.e. no more dialog jobs for the remote application are accepted |
| INT utmLpapOutq | 1.3.6.1.4.1.231.2.19.3.10.2.1.6 | INTEGER | read-only | Number of messages that still have to be sent to this remote application |
| INT utmLpapIdleTime | 1.3.6.1.4.1.231.2.19.3.10.2.1.7 | INTEGER | read-write | Time for monitoring the idle state of a session in seconds |
| utmPoolData | 1.3.6.1.4.1.231.2.19.3.11 | |||
| INT utmPoolTabNum | 1.3.6.1.4.1.231.2.19.3.11.1 | INTEGER | read-only | The number of entries in the table utmPoolTable |
| utmPoolTable | 1.3.6.1.4.1.231.2.19.3.11.2 | not-accessible | Table including infos about terminal pools | |
| utmPoolEntry | 1.3.6.1.4.1.231.2.19.3.11.2.1 | not-accessible | An entry in the table | |
| INT utmPoolIndex | 1.3.6.1.4.1.231.2.19.3.11.2.1.1 | INTEGER | read-only | A unique value for each entry, its value ranges between 1 and the value of utmPoolTabNum |
| STR utmPoolProname | 1.3.6.1.4.1.231.2.19.3.11.2.1.2 | DisplayString | read-only | Processor name of the terminal pool |
| STR utmPoolBcamAppl | 1.3.6.1.4.1.231.2.19.3.11.2.1.3 | DisplayString | read-only | Name of the access point to the transport system which was generated for this terminal pool |
| STR utmPoolPtype | 1.3.6.1.4.1.231.2.19.3.11.2.1.4 | DisplayString | read-only | Physical terminal type of the terminals that can be connected to the application via this pool |
| INT utmPoolStations | 1.3.6.1.4.1.231.2.19.3.11.2.1.5 | INTEGER | read-only | Generated maximum number of terminals that can be connected to the application via this pool |
| INT utmPoolStatusOn | 1.3.6.1.4.1.231.2.19.3.11.2.1.6 | INTEGER | read-write | Maximum number of terminals with STATUS=ON |
| INT utmPoolActCon | 1.3.6.1.4.1.231.2.19.3.11.2.1.7 | INTEGER | read-only | Number of terminals connected to the application via this pool |
| INT utmPoolMaxCon | 1.3.6.1.4.1.231.2.19.3.11.2.1.8 | INTEGER | read-only | Maximum number of terminals that have been simultaneously connected to the application via this terminal pool during this application run |
| STR utmPoolKset | 1.3.6.1.4.1.231.2.19.3.11.2.1.9 | DisplayString | read-only | Key set of the terminals of this terminal pool |
| INT utmPoolLock | 1.3.6.1.4.1.231.2.19.3.11.2.1.10 | INTEGER | read-only | Lock of the terminals of this terminal pool |
| utmLsesData | 1.3.6.1.4.1.231.2.19.3.12 | |||
| INT utmLsesTabNum | 1.3.6.1.4.1.231.2.19.3.12.1 | INTEGER | read-only | The number of entries in the table utmLsesTable |
| utmLsesTable | 1.3.6.1.4.1.231.2.19.3.12.2 | not-accessible | Table including infos about the sessions via LU6.1 | |
| utmLsesEntry | 1.3.6.1.4.1.231.2.19.3.12.2.1 | not-accessible | An entry in the table | |
| INT utmLsesIndex | 1.3.6.1.4.1.231.2.19.3.12.2.1.1 | INTEGER | read-only | A unique value for each entry, its value ranges between 1 and the value of utmLsesTabNum |
| STR utmLsesName | 1.3.6.1.4.1.231.2.19.3.12.2.1.2 | DisplayString | read-only | Name of the session in the local application |
| STR utmLsesRses | 1.3.6.1.4.1.231.2.19.3.12.2.1.3 | DisplayString | read-only | Name of the session in the remote application |
| STR utmLsesLpap | 1.3.6.1.4.1.231.2.19.3.12.2.1.4 | DisplayString | read-only | Name of the remote application for which the session is generated |
| STR utmLsesCon | 1.3.6.1.4.1.231.2.19.3.12.2.1.5 | DisplayString | read-only | Denotes the transport connection that is set up for the session |
| STR utmLsesProname | 1.3.6.1.4.1.231.2.19.3.12.2.1.6 | DisplayString | read-only | Processor name |
| STR utmLsesBcamAppl | 1.3.6.1.4.1.231.2.19.3.12.2.1.7 | DisplayString | read-only | Denotes the transport connection that is set up for the session |
| STR utmLsesAgUser | 1.3.6.1.4.1.231.2.19.3.12.2.1.8 | DisplayString | read-only | Name of the job-submitting partner for which the session has been reserved |
| utmLtacData | 1.3.6.1.4.1.231.2.19.3.13 | |||
| INT utmLtacTabNum | 1.3.6.1.4.1.231.2.19.3.13.1 | INTEGER | read-only | The number of entries in the table utmLtacTable |
| utmLtacTable | 1.3.6.1.4.1.231.2.19.3.13.2 | not-accessible | Table including infos about LTACs | |
| utmLtacEntry | 1.3.6.1.4.1.231.2.19.3.13.2.1 | not-accessible | An entry in the table | |
| INT utmLtacIndex | 1.3.6.1.4.1.231.2.19.3.13.2.1.1 | INTEGER | read-only | A unique value for each entry, its value ranges between 1 and the value of utmLtacTabNum |
| STR utmLtacName | 1.3.6.1.4.1.231.2.19.3.13.2.1.2 | DisplayString | read-only | Name of the LTAC |
| INT utmLtacLock | 1.3.6.1.4.1.231.2.19.3.13.2.1.3 | INTEGER | read-only | Lock of the remote converstation |
| INT utmLtacStatus | 1.3.6.1.4.1.231.2.19.3.13.2.1.4 | INTEGER | read-write | The LTAC transaction code is either locked (OFF) or unlocked (ON) |
| STR utmLtacRtac | 1.3.6.1.4.1.231.2.19.3.13.2.1.5 | DisplayString | read-only | Name of the transaction code in a remote application |
| STR utmLtacLpap | 1.3.6.1.4.1.231.2.19.3.13.2.1.6 | DisplayString | read-only | Name of the remote application in the local application |
| INT utmLtacAccessWait | 1.3.6.1.4.1.231.2.19.3.13.2.1.7 | INTEGER | read-write | Time in seconds spent waiting for a session or association to be reserved |
| INT utmLtacReplyWait | 1.3.6.1.4.1.231.2.19.3.13.2.1.8 | INTEGER | read-write | Time in seconds spent waiting for response from receiving partner |
| INT utmLtacUsed | 1.3.6.1.4.1.231.2.19.3.13.2.1.9 | INTEGER | read-only | Number of jobs issued to this LTAC since the start of the application |
| utmOsiAssData | 1.3.6.1.4.1.231.2.19.3.14 | |||
| INT utmOsiAssTabNum | 1.3.6.1.4.1.231.2.19.3.14.1 | INTEGER | read-only | The number of entries in the table utmOsiAssTable |
| utmOsiAssTable | 1.3.6.1.4.1.231.2.19.3.14.2 | not-accessible | Table including infos about OSI-TP associations | |
| utmOsiAssEntry | 1.3.6.1.4.1.231.2.19.3.14.2.1 | not-accessible | An entry in the table | |
| INT utmOsiAssIndex | 1.3.6.1.4.1.231.2.19.3.14.2.1.1 | INTEGER | read-only | A unique value for each entry, its value ranges between 1 and the value of utmOsiAssTabNum |
| STR utmOsiAssName | 1.3.6.1.4.1.231.2.19.3.14.2.1.2 | DisplayString | read-only | Name of the OSI association |
| STR utmOsiAssOsiLpap | 1.3.6.1.4.1.231.2.19.3.14.2.1.3 | DisplayString | read-only | Name of the remote application in the local application for which the association is generated |
| STR utmOsiAssOsiCon | 1.3.6.1.4.1.231.2.19.3.14.2.1.4 | DisplayString | read-only | Name of the connection set up to the remote application for the association |
| STR utmOsiAssAgUser | 1.3.6.1.4.1.231.2.19.3.14.2.1.5 | DisplayString | read-only | Name of the job submitter for which the association is reserved |
| INT utmOsiAssConTime | 1.3.6.1.4.1.231.2.19.3.14.2.1.6 | INTEGER | read-only | Duration of the connection in minutes |
| INT utmOsiAssLetters | 1.3.6.1.4.1.231.2.19.3.14.2.1.7 | INTEGER | read-only | Number of messages input and output since the start of the application |
| utmOsiConData | 1.3.6.1.4.1.231.2.19.3.15 | |||
| INT utmOsiConTabNum | 1.3.6.1.4.1.231.2.19.3.15.1 | INTEGER | read-only | The number of entries in the table utmOsiConTable |
| utmOsiConTable | 1.3.6.1.4.1.231.2.19.3.15.2 | not-accessible | Table including infos about virtual connections for distributed processing via the OSI-TP protocol | |
| utmOsiConEntry | 1.3.6.1.4.1.231.2.19.3.15.2.1 | not-accessible | An entry in the table | |
| INT utmOsiConIndex | 1.3.6.1.4.1.231.2.19.3.15.2.1.1 | INTEGER | read-only | A unique value for each entry, its value ranges between 1 and the value of utmOsiConTabNum |
| STR utmOsiConName | 1.3.6.1.4.1.231.2.19.3.15.2.1.2 | DisplayString | read-only | Name of the OSI connection |
| STR utmOsiConOsiLpap | 1.3.6.1.4.1.231.2.19.3.15.2.1.3 | DisplayString | read-only | Name of the remote application in the local application |
| STR utmOsiConTsel | 1.3.6.1.4.1.231.2.19.3.15.2.1.4 | DisplayString | read-only | BCAM application name of the remote OSI-TP partner (transport selector) |
| STR utmOsiConNsel | 1.3.6.1.4.1.231.2.19.3.15.2.1.5 | DisplayString | read-only | Name of the processor on which the OSI-TP partner is located (network selector) |
| STR utmOsiConAccPnt | 1.3.6.1.4.1.231.2.19.3.15.2.1.6 | DisplayString | read-only | Local name of an access point through which communication with OSI-TP partners takes place |
| INT utmOsiConActive | 1.3.6.1.4.1.231.2.19.3.15.2.1.7 | INTEGER | read-write | The transport connection can either be used (YES) or is reserved as a substitute connection (NO) |
| utmOsiLpapData | 1.3.6.1.4.1.231.2.19.3.16 | |||
| INT utmOsiLpapTabNum | 1.3.6.1.4.1.231.2.19.3.16.1 | INTEGER | read-only | The number of entries in the table utmOsiLpapTable |
| utmOsiLpapTable | 1.3.6.1.4.1.231.2.19.3.16.2 | not-accessible | Table including infos about remote partner applications that communicate via the OSI-TP protocol | |
| utmOsiLpapEntry | 1.3.6.1.4.1.231.2.19.3.16.2.1 | not-accessible | An entry in the table | |
| INT utmOsiLpapIndex | 1.3.6.1.4.1.231.2.19.3.16.2.1.1 | INTEGER | read-only | A unique value for each entry, its value ranges between 1 and the value of utmOsiLpapTabNum |
| STR utmOsiLpapName | 1.3.6.1.4.1.231.2.19.3.16.2.1.2 | DisplayString | read-only | Name of the OSI LPAP |
| STR utmOsiLpapKset | 1.3.6.1.4.1.231.2.19.3.16.2.1.3 | DisplayString | read-only | Key set of the remote application |
| INT utmOsiLpapStatus | 1.3.6.1.4.1.231.2.19.3.16.2.1.4 | INTEGER | read-write | A connection to the remote application exists or can be set up (ON), or cannot be set up (OFF) |
| INT utmOsiLpapQuiet | 1.3.6.1.4.1.231.2.19.3.16.2.1.5 | INTEGER | read-write | A 'Q' means 'quiet', i.e. no more dialog jobs for the remote application are accepted |
| INT utmOsiLpapOutq | 1.3.6.1.4.1.231.2.19.3.16.2.1.6 | INTEGER | read-only | Number of messages that still have to be sent to this remote application |
| INT utmOsiLpapIdleTime | 1.3.6.1.4.1.231.2.19.3.16.2.1.7 | INTEGER | read-write | Time for monitoring the idle state of a session |
| STR utmOsiLpapOsiCon | 1.3.6.1.4.1.231.2.19.3.16.2.1.8 | DisplayString | read-only | Name of the transport connection used to communicate with the OSI-TP partner |
| INT utmOsiLpapAssoc | 1.3.6.1.4.1.231.2.19.3.16.2.1.9 | INTEGER | read-only | Number of parallel connections generated for the OSI-TP partner |
| INT utmOsiLpapConnect | 1.3.6.1.4.1.231.2.19.3.16.2.1.10 | INTEGER | read-only | Number of connections set up |
| INT utmOsiLpapAutoCon | 1.3.6.1.4.1.231.2.19.3.16.2.1.11 | INTEGER | read-only | Number of connections to be set up to the partner when the application is started |
| utmMiscData | 1.3.6.1.4.1.231.2.19.3.17 | |||
| utmTrapControl | 1.3.6.1.4.1.231.2.19.4 | |||
| INT utmTrapCtrlCheckCaseNOW | 1.3.6.1.4.1.231.2.19.4.1 | INTEGER | read-write | Any set request for this object will start an immediate trap case detection for all traps (independent from any timer) |
| INT utmTrapCtrlAbortedPeriod | 1.3.6.1.4.1.231.2.19.4.2 | INTEGER | read-write | Break time in seconds between two trap checks; '-1' means no trap case detection |
| INT utmTrapCtrlPENDERPeriod | 1.3.6.1.4.1.231.2.19.4.3 | INTEGER | read-write | Break time in seconds between two trap checks; '-1' means no trap case detection |
| INT utmTrapCtrlDeadlockPeriod | 1.3.6.1.4.1.231.2.19.4.4 | INTEGER | read-write | Break time in seconds between two trap checks; '-1' means no trap case detection |
| INT utmTrapCtrlSecurViolPeriod | 1.3.6.1.4.1.231.2.19.4.5 | INTEGER | read-write | Break time in seconds between two trap checks; '-1' means no trap case detection |
| INT utmTrapCtrlSecurViolLimit | 1.3.6.1.4.1.231.2.19.4.6 | INTEGER | read-write | Necessary number of user security violations (since application start or since last security trap) before sending a new trap |
| INT utmTrapCtrlConnLossPeriod | 1.3.6.1.4.1.231.2.19.4.7 | INTEGER | read-write | Break time in seconds between two trap checks; '-1' means no trap case detection |
| INT utmTrapCtrlConnLossLimit | 1.3.6.1.4.1.231.2.19.4.8 | INTEGER | read-write | Necessary number of unconnected partner applications before sending a trap; -1 means maximum (no connected partners) |
| INT utmTrapCtrlConnUsersPeriod | 1.3.6.1.4.1.231.2.19.4.9 | INTEGER | read-write | Break time in seconds between two trap checks; '-1' means no trap case detection |
| INT utmTrapCtrlConnUsersLimit | 1.3.6.1.4.1.231.2.19.4.10 | INTEGER | read-write | Necessary number of connected users before sending a trap; -1 means the generated maximum of allowed user connections |
| INT utmTrapCtrlActiveTasksPeriod | 1.3.6.1.4.1.231.2.19.4.11 | INTEGER | read-write | Break time in seconds between two trap checks; '-1' means no trap case detection |
| INT utmTrapCtrlActiveTasksLimit | 1.3.6.1.4.1.231.2.19.4.12 | INTEGER | read-write | Necessary number of active tasks before sending a trap; -1 means the actual maximum of allowed tasks |
| INT utmTrapCtrlCacheHitPeriod | 1.3.6.1.4.1.231.2.19.4.13 | INTEGER | read-write | Break time in seconds between two trap checks; '-1' means no trap case detection |
| INT utmTrapCtrlCacheHitLimit | 1.3.6.1.4.1.231.2.19.4.14 | INTEGER | read-write | Minimum rate (in percent) of cache hits before sending a trap |
| INT utmTrapCtrlPoolSizePeriod | 1.3.6.1.4.1.231.2.19.4.15 | INTEGER | read-write | Break time in seconds between two trap checks; '-1' means no trap case detection |
| INT utmTrapCtrlPoolSizeLimit | 1.3.6.1.4.1.231.2.19.4.16 | INTEGER | read-write | Maximum pool size (in percent) before sending a trap |
| INT utmTrapCtrlTclWaitMsgsPeriod | 1.3.6.1.4.1.231.2.19.4.17 | INTEGER | read-write | Break time in seconds between two trap checks; '-1' means no trap case detection |
| INT utmTrapCtrlTclWaitMsgsLimit | 1.3.6.1.4.1.231.2.19.4.18 | INTEGER | read-write | Necessary number of waiting messages for a TAC class before sending a trap |
| INT utmTrapCtrlLtermWaitOutMsgsPeriod | 1.3.6.1.4.1.231.2.19.4.19 | INTEGER | read-write | Break time in seconds between two trap checks; '-1' means no trap case detection |
| INT utmTrapCtrlLtermWaitOutMsgsLimit | 1.3.6.1.4.1.231.2.19.4.20 | INTEGER | read-write | Necessary number of messages waiting to be output on a logical terminal before sending a trap |
RFC description
Monitors UTM (UTS Time Manager) application status and configuration on Siemens BS2000 systems. Tracks application health and operational parameters.
Start monitoring Siemens/Fujitsu BS2000-OSD mainframes and Unix hosts running openUTM (transaction throughput/terminal-session status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.