All MIBs › UBQS-MPLS-LDP-MIB › ubiLdpFailoverCfmEnable
ubiLdpFailoverCfmEnable
Module: UBQS-MPLS-LDP-MIB
OID (symbolic): UBQS-MPLS-LDP-MIB::ubiLdpFailoverCfmEnable
OID (numeric): 1.3.6.1.4.1.7800.100.24.3.1.1.3
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: set the attribute of Connectivity Fault Management(CFM) in LDP. If you set this field, LDP creates the socket (AF_CFM) to detect whether the link associated with the peer is UP or DOWN. After set this attribute, You MUST enable the property for CFM in the interface which you want to check the connectivity.
What is ubiLdpFailoverCfmEnable?
This value enables Connectivity Fault Management (CFM) integration in LDP, causing LDP to create an AF_CFM socket to detect whether the link to a peer is up or down; CFM must also be separately enabled on the specific interface being monitored. Admins enable it to get faster, CFM-based link failure detection feeding into LDP's failover behavior rather than relying solely on LDP's own hello/keepalive timers. Enabling it without also enabling CFM on the relevant interface would not provide the intended fast-failure detection for that link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.24.3.1.1.3 snmpwalk -v2c -c public <target> UBQS-MPLS-LDP-MIB::ubiLdpFailoverCfmEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.24.3.1.1.3.1 snmpget -v2c -c public <target> UBQS-MPLS-LDP-MIB::ubiLdpFailoverCfmEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.24.3.1.1.3.1 s <value>
Start monitoring Ubiquoss MPLS-capable switch/router (LDP session/label-binding status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-MPLS-LDP-MIB::ubiLdpFailoverCfmEnable OID value, configure state conditions and alerts, and monitor any Ubiquoss MPLS-capable switch/router (LDP session/label-binding status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| 1.3.6.1.4.1.7800.100.24 | ubiMplsGroupMIB | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.24.3 | ubiLdpMIB | UBQS-MPLS-LDP-MIB |
| 1.3.6.1.4.1.7800.100.24.3.1 | ubiLdpMIBObjects | UBQS-MPLS-LDP-MIB |
| 1.3.6.1.4.1.7800.100.24.3.1.1 | ubiLdpConfig | UBQS-MPLS-LDP-MIB |
| 1.3.6.1.4.1.7800.100.24.3.1.1.3 | ubiLdpFailoverCfmEnable | UBQS-MPLS-LDP-MIB |