All MIBs › UBQS-MPLS-LDP-MIB › ubiLdpAcUpSignalEnable
ubiLdpAcUpSignalEnable
Module: UBQS-MPLS-LDP-MIB
OID (symbolic): UBQS-MPLS-LDP-MIB::ubiLdpAcUpSignalEnable
OID (numeric): 1.3.6.1.4.1.7800.100.24.3.1.1.5
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Enable the field to notify the interface of binded vpls to the neighbors for VPLS. If this is reset, then does not quickly send the signal to neighbors.
What is ubiLdpAcUpSignalEnable?
This value enables prompt signaling of an interface's VPLS attachment circuit binding to neighboring routers; if reset, the signal to neighbors is not sent quickly. Admins enable it to speed up VPLS convergence by notifying neighbors of the AC-to-VPLS binding as soon as possible rather than delaying. Disabling it would slow down how quickly neighboring PE routers learn about this router's VPLS attachment circuit binding.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.24.3.1.1.5 snmpwalk -v2c -c public <target> UBQS-MPLS-LDP-MIB::ubiLdpAcUpSignalEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.24.3.1.1.5.1 snmpget -v2c -c public <target> UBQS-MPLS-LDP-MIB::ubiLdpAcUpSignalEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.24.3.1.1.5.1 s <value>
Start monitoring Ubiquoss MPLS-capable switch/router (LDP session/label-binding status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-MPLS-LDP-MIB::ubiLdpAcUpSignalEnable OID value, configure state conditions and alerts, and monitor any Ubiquoss MPLS-capable switch/router (LDP session/label-binding status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| 1.3.6.1.4.1.7800.100.24 | ubiMplsGroupMIB | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.24.3 | ubiLdpMIB | UBQS-MPLS-LDP-MIB |
| 1.3.6.1.4.1.7800.100.24.3.1 | ubiLdpMIBObjects | UBQS-MPLS-LDP-MIB |
| 1.3.6.1.4.1.7800.100.24.3.1.1 | ubiLdpConfig | UBQS-MPLS-LDP-MIB |
| 1.3.6.1.4.1.7800.100.24.3.1.1.5 | ubiLdpAcUpSignalEnable | UBQS-MPLS-LDP-MIB |