All MIBs › UBQS-LAG-MIB › ubiReduRvt
ubiReduRvt
Module: UBQS-LAG-MIB
OID (symbolic): UBQS-LAG-MIB::ubiReduRvt
OID (numeric): 1.3.6.1.4.1.7800.100.16.1.2.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: revert mode of backup interface 0 : Off 1 : On
What is ubiReduRvt?
This object reports whether revertive switching is enabled for this backup interface pairing: Off(0) means traffic stays on the backup interface after it takes over even once the primary recovers, while On(1) means traffic automatically reverts back to the primary interface once it comes back up. Admins configure this based on whether they want automatic fail-back behavior or prefer to keep traffic on the currently active link until a manual switch. For example, ubiReduRvt reporting On(1) means the system will automatically move traffic back to the primary port as soon as it's healthy again.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.16.1.2.1.1.6 snmpwalk -v2c -c public <target> UBQS-LAG-MIB::ubiReduRvt
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.16.1.2.1.1.6.1 snmpget -v2c -c public <target> UBQS-LAG-MIB::ubiReduRvt.1
Start monitoring Ubiquoss access/aggregation switch (802.3ad LAG/LACP membership and backup-port failover status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-LAG-MIB::ubiReduRvt OID value, configure state conditions and alerts, and monitor any Ubiquoss access/aggregation switch (802.3ad LAG/LACP membership and backup-port failover status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.16 | ubiLagMIB | UBQS-LAG-MIB |
| 1.3.6.1.4.1.7800.100.16.1 | ubiLagMIBObjects | UBQS-LAG-MIB |
| 1.3.6.1.4.1.7800.100.16.1.2 | ubiRedundancyPort | UBQS-LAG-MIB |
| 1.3.6.1.4.1.7800.100.16.1.2.1 | ubiRedundancyPortTable | UBQS-LAG-MIB |
| 1.3.6.1.4.1.7800.100.16.1.2.1.1 | ubiRedundancyPortEntry | UBQS-LAG-MIB |
| 1.3.6.1.4.1.7800.100.16.1.2.1.1.6 | ubiReduRvt | UBQS-LAG-MIB |