All MIBs › UBQS-IP-MIB › ubiPingSendTos
ubiPingSendTos
Module: UBQS-IP-MIB
OID (symbolic): UBQS-IP-MIB::ubiPingSendTos
OID (numeric): 1.3.6.1.4.1.7800.100.14.2.2.9
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Specifies the Type Of Service.
What is ubiPingSendTos?
The Type-of-Service (ToS) value to set on outgoing ping packets, letting an admin test whether QoS marking along the path affects reachability or latency.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.14.2.2.9 snmpwalk -v2c -c public <target> UBQS-IP-MIB::ubiPingSendTos
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.14.2.2.9.1 snmpget -v2c -c public <target> UBQS-IP-MIB::ubiPingSendTos.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.14.2.2.9.1 i <value>
Start monitoring Ubiquoss switches/access routers (IP address/route config and SNMP-ping reachability status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-IP-MIB::ubiPingSendTos OID value, configure state conditions and alerts, and monitor any Ubiquoss switches/access routers (IP address/route config and SNMP-ping reachability status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.14 | ubiIpMIB | UBQS-IP-MIB |
| 1.3.6.1.4.1.7800.100.14.2 | ubiPingMIBObjects | UBQS-IP-MIB |
| 1.3.6.1.4.1.7800.100.14.2.2 | ubiPingSend | UBQS-IP-MIB |
| 1.3.6.1.4.1.7800.100.14.2.2.9 | ubiPingSendTos | UBQS-IP-MIB |