All MIBs › UBQS-IP-MIB › ubiPingSendRepeat
ubiPingSendRepeat
Module: UBQS-IP-MIB
OID (symbolic): UBQS-IP-MIB::ubiPingSendRepeat
OID (numeric): 1.3.6.1.4.1.7800.100.14.2.2.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Specifies the number of ping packets to send to the target.
What is ubiPingSendRepeat?
The number of ping packets to send to the target in this test, letting an admin run a longer test for a more reliable packet-loss measurement.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.14.2.2.3 snmpwalk -v2c -c public <target> UBQS-IP-MIB::ubiPingSendRepeat
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.14.2.2.3.1 snmpget -v2c -c public <target> UBQS-IP-MIB::ubiPingSendRepeat.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.14.2.2.3.1 i <value>
Start monitoring Ubiquoss switches/access routers (IP address/route config and SNMP-ping reachability status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-IP-MIB::ubiPingSendRepeat OID value, configure state conditions and alerts, and monitor any Ubiquoss switches/access routers (IP address/route config and SNMP-ping reachability status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.14 | ubiIpMIB | UBQS-IP-MIB |
| 1.3.6.1.4.1.7800.100.14.2 | ubiPingMIBObjects | UBQS-IP-MIB |
| 1.3.6.1.4.1.7800.100.14.2.2 | ubiPingSend | UBQS-IP-MIB |
| 1.3.6.1.4.1.7800.100.14.2.2.3 | ubiPingSendRepeat | UBQS-IP-MIB |