All MIBs › UBQS-IP-MIB › ubiIpv6NeighborType
ubiIpv6NeighborType
Module: UBQS-IP-MIB
OID (symbolic): UBQS-IP-MIB::ubiIpv6NeighborType
OID (numeric): 1.3.6.1.4.1.7800.100.14.1.3.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The type of mapping.
Setting this object to the value invalid(2) has the effect
of invalidating the corresponding entry in the ubiIpv6NeighborTable. That is, it effectively dis-associates the interface identified with said entry from the mapping identified with said entry. It is an implementation- specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ubiIpv6NeighborType object.
As the entries in this table are typically not persistent when this object is written the entity should not save the change to non-volatile storage. Note: a stronger requirement is not used because this object was previously defined.
What is ubiIpv6NeighborType?
Classifies how this IPv6-to-MAC mapping was learned; setting it to invalid(2) effectively removes the mapping, though the agent may or may not immediately delete the row -- an admin should check ubiIpv6NeighborType itself to know whether a listed entry is actually still in use.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.14.1.3.1.4 snmpwalk -v2c -c public <target> UBQS-IP-MIB::ubiIpv6NeighborType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.14.1.3.1.4.1 snmpget -v2c -c public <target> UBQS-IP-MIB::ubiIpv6NeighborType.1
Start monitoring Ubiquoss switches/access routers (IP address/route config and SNMP-ping reachability status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-IP-MIB::ubiIpv6NeighborType OID value, configure state conditions and alerts, and monitor any Ubiquoss switches/access routers (IP address/route config and SNMP-ping reachability status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.14 | ubiIpMIB | UBQS-IP-MIB |
| 1.3.6.1.4.1.7800.100.14.1 | ubiIpMIBObjects | UBQS-IP-MIB |
| 1.3.6.1.4.1.7800.100.14.1.3 | ubiIpv6NeighborTable | UBQS-IP-MIB |
| 1.3.6.1.4.1.7800.100.14.1.3.1 | ubiIpv6NeighborEntry | UBQS-IP-MIB |
| 1.3.6.1.4.1.7800.100.14.1.3.1.4 | ubiIpv6NeighborType | UBQS-IP-MIB |