All MIBs › UBQS-CFM-MIB › ubiCfmMepOamSendDstMac
ubiCfmMepOamSendDstMac
Module: UBQS-CFM-MIB
OID (symbolic): UBQS-CFM-MIB::ubiCfmMepOamSendDstMac
OID (numeric): 1.3.6.1.4.1.7800.100.10.1.4.4.5
Node type: OBJECT-TYPE
Type: MacAddress
Access: read-write
Description: Destination MAC address
What is ubiCfmMepOamSendDstMac?
The destination MAC address to target when initiating an on-demand CFM ping or linktrace. Lets an admin direct the diagnostic test at a specific remote MEP rather than a broadcast target.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.10.1.4.4.5 snmpwalk -v2c -c public <target> UBQS-CFM-MIB::ubiCfmMepOamSendDstMac
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.10.1.4.4.5.1 snmpget -v2c -c public <target> UBQS-CFM-MIB::ubiCfmMepOamSendDstMac.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.10.1.4.4.5.1 s <value>
Start monitoring Ubiquoss Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-CFM-MIB::ubiCfmMepOamSendDstMac OID value, configure state conditions and alerts, and monitor any Ubiquoss Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.10 | ubiCFMMIB | UBQS-CFM-MIB |
| 1.3.6.1.4.1.7800.100.10.1 | ubiCFMMIBObjects | UBQS-CFM-MIB |
| 1.3.6.1.4.1.7800.100.10.1.4 | ubiCfmMep | UBQS-CFM-MIB |
| 1.3.6.1.4.1.7800.100.10.1.4.4 | ubiCfmMepOamSend | UBQS-CFM-MIB |
| 1.3.6.1.4.1.7800.100.10.1.4.4.5 | ubiCfmMepOamSendDstMac | UBQS-CFM-MIB |