All MIBs › TRIPPLITE-MIB › tlUpsControlRamp
tlUpsControlRamp
Module: TRIPPLITE-MIB
OID (symbolic): TRIPPLITE-MIB::tlUpsControlRamp
OID (numeric): 1.3.6.1.4.1.850.100.1.8.3.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Set to TRUE to initiate Ramp
What is tlUpsControlRamp?
Setting this to TRUE initiates a 'ramp' operation, a staged/sequenced power-up of outlets, used to bring load back online gradually after an outage.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.850.100.1.8.3.2 snmpwalk -v2c -c public <target> TRIPPLITE-MIB::tlUpsControlRamp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.850.100.1.8.3.2.1 snmpget -v2c -c public <target> TRIPPLITE-MIB::tlUpsControlRamp.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.850.100.1.8.3.2.1 s <value>
Start monitoring Tripp Lite UPS (uninterruptible power supply) with PowerAlert management (battery charge/load/alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TRIPPLITE-MIB::tlUpsControlRamp OID value, configure state conditions and alerts, and monitor any Tripp Lite UPS (uninterruptible power supply) with PowerAlert management (battery charge/load/alarm status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.850 | tripplite | TRIPPLITE |
| 1.3.6.1.4.1.850.100 | tlUPS | TRIPPLITE-12X |
| 1.3.6.1.4.1.850.100.1 | tlUpsObjects | TRIPPLITE-12X |
| 1.3.6.1.4.1.850.100.1.8 | tlUpsControl | TRIPPLITE-12X |
| 1.3.6.1.4.1.850.100.1.8.3 | tlUpsWellKnownControls | TRIPPLITE-12X |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.850.100.1.8.3.2 | tlUpsControlRamp | TRIPPLITE-MIB |