TRIPPLITE-12X :: tlUpsWatchdogSecsBeforeReboot

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTRIPPLITE-12XtlUpsWatchdogSecsBeforeReboot

tlUpsWatchdogSecsBeforeReboot

Module: TRIPPLITE-12X

OID (symbolic): TRIPPLITE-12X::tlUpsWatchdogSecsBeforeReboot

OID (numeric): 1.3.6.1.4.1.850.100.1.8.2

Node type: OBJECT-TYPE

Type: NonNegativeInteger

Access: read-write

Description: The maximum number of seconds that can expire between polls that the engine makes to the UPS for data. If this time runs out, then the UPS will cycle its outputs. Set this to zero to turns disable this feature.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.850.100.1.8.2
snmpwalk -v2c -c public <target> TRIPPLITE-12X::tlUpsWatchdogSecsBeforeReboot

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.850.100.1.8.2.1
snmpget -v2c -c public <target> TRIPPLITE-12X::tlUpsWatchdogSecsBeforeReboot.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.850.100.1.8.2.1 i <value>

Start monitoring Tripp Lite UPS, power distribution unit (PDU), PowerAlert-managed (email/SNMP contact config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TRIPPLITE-12X::tlUpsWatchdogSecsBeforeReboot OID value, configure state conditions and alerts, and monitor any Tripp Lite UPS, power distribution unit (PDU), PowerAlert-managed (email/SNMP contact config status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.850trippliteTRIPPLITE
Numeric OIDNameModule
1.3.6.1.4.1.850.100tlUPSTRIPPLITE-12X
1.3.6.1.4.1.850.100.1tlUpsObjectsTRIPPLITE-12X
1.3.6.1.4.1.850.100.1.8tlUpsControlTRIPPLITE-12X
1.3.6.1.4.1.850.100.1.8.2tlUpsWatchdogSecsBeforeRebootTRIPPLITE-12X