TRIPPLITE-12X :: tlUpsInputSourceSelect

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTRIPPLITE-12XtlUpsInputSourceSelect

tlUpsInputSourceSelect

Module: TRIPPLITE-12X

OID (symbolic): TRIPPLITE-12X::tlUpsInputSourceSelect

OID (numeric): 1.3.6.1.4.1.850.100.1.3.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The determination as to which of two AC input lines is designated as the primary input source. The other is designated as the secondary input source. This value will always return inputSourceA(0) for devices with a single input source. Setting this value is supported only on selected models.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.850.100.1.3.3
snmpwalk -v2c -c public <target> TRIPPLITE-12X::tlUpsInputSourceSelect

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.850.100.1.3.3.1
snmpget -v2c -c public <target> TRIPPLITE-12X::tlUpsInputSourceSelect.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.850.100.1.3.3.1 i <value>

Start monitoring Tripp Lite UPS, power distribution unit (PDU), PowerAlert-managed (email/SNMP contact config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TRIPPLITE-12X::tlUpsInputSourceSelect OID value, configure state conditions and alerts, and monitor any Tripp Lite UPS, power distribution unit (PDU), PowerAlert-managed (email/SNMP contact config status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.850trippliteTRIPPLITE
Numeric OIDNameModule
1.3.6.1.4.1.850.100tlUPSTRIPPLITE-12X
1.3.6.1.4.1.850.100.1tlUpsObjectsTRIPPLITE-12X
1.3.6.1.4.1.850.100.1.3tlUpsInputTRIPPLITE-12X
1.3.6.1.4.1.850.100.1.3.3tlUpsInputSourceSelectTRIPPLITE-12X