All MIBs › TRIPPLITE-12X › tlSrCoolSetMode
tlSrCoolSetMode
Module: TRIPPLITE-12X
OID (symbolic): TRIPPLITE-12X::tlSrCoolSetMode
OID (numeric): 1.3.6.1.4.1.850.104.1.3.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Set the operating mode of cooling unit. Unit must be ON to set mode.
What is tlSrCoolSetMode?
Sets the unit's operating mode to cooling or dehumidifying. The unit must already be powered on via tlSrCoolNetOnOff before this mode setting takes effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.850.104.1.3.2 snmpwalk -v2c -c public <target> TRIPPLITE-12X::tlSrCoolSetMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.850.104.1.3.2.1 snmpget -v2c -c public <target> TRIPPLITE-12X::tlSrCoolSetMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.850.104.1.3.2.1 i <value>
Start monitoring Tripp Lite UPS, power distribution unit (PDU), PowerAlert-managed (email/SNMP contact config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TRIPPLITE-12X::tlSrCoolSetMode OID value, configure state conditions and alerts, and monitor any Tripp Lite UPS, power distribution unit (PDU), PowerAlert-managed (email/SNMP contact config status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.850 | tripplite | TRIPPLITE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.850.104 | tlSrCoolNet | TRIPPLITE-12X |
| 1.3.6.1.4.1.850.104.1 | tlSrCoolNetData | TRIPPLITE-12X |
| 1.3.6.1.4.1.850.104.1.3 | tlSrCoolNetConfig | TRIPPLITE-12X |
| 1.3.6.1.4.1.850.104.1.3.2 | tlSrCoolSetMode | TRIPPLITE-12X |