TPLINK-LLDPCONFIG-MIB

All MIBs › TPLINK-LLDPCONFIG-MIB

Category: Link Layer and Ethernet Protocols

Description: Manages TP-Link switch LLDP per-port transmit and receive configuration parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TPLINK-LLDPCONFIG-MIB?

TPLINK-LLDPCONFIG-MIB is a TP-Link proprietary MIB configuring LLDP (Link Layer Discovery Protocol) on TP-Link managed switches (built on the vendor's TPLINK-LLDP-MIB/TPLINK-TC-MIB). Its objects cover global enable state, transmit interval/TTL/delay/init-delay, trap enable, and a fast-count setting for initial discovery, alongside a per-port table controlling admin status, SNMP-notification enable, and which optional TLVs (description, capabilities, management address, VLAN/protocol-VLAN/VLAN-name, link aggregation, port status, max frame size, power) are advertised. As a configuration MIB it lets an administrator confirm LLDP is enabled with the correct set of advertised TLVs per port. It is deployed on TP-Link managed switches. Engineers can download the TPLINK-LLDPCONFIG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TPLINK-LLDPCONFIG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

TP-Link managed switches

Monitoring Examples

An administrator checks lldpConfigPortTlvManageAddr to confirm a port is advertising its management IP address via LLDP, which downstream network-discovery tools rely on.

What Can Be Monitored

LLDP enable state and per-port TLV configuration

Imported Objects

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

IpAddress
OBJECT-TYPE

From TPLINK-LLDP-MIB

tplinkLldpMIBObjects

OBJECT-IDENTITY

From TPLINK-TC-MIB

TPRowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
lldpConfig	1.3.6.1.4.1.11863.6.35.1.1
lldpGlobalConfig	1.3.6.1.4.1.11863.6.35.1.1.1
INT lldpGlobalConfigEnable	1.3.6.1.4.1.11863.6.35.1.1.1.1	INTEGER	read-write	Select Enable/Disable LLDP function globally on the Switch. 0. disable 1. enable
INT lldpGlobalConfigTxInterval	1.3.6.1.4.1.11863.6.35.1.1.1.2	INTEGER	read-write	The interval of the local device send the LLDPDU to the neighbor device.
INT lldpGlobalConfigTtl	1.3.6.1.4.1.11863.6.35.1.1.1.3	INTEGER	read-write	TTL multiplier determines the TTL value in the LLDPDU packet which the local device send to the neighbor device. TTL value is the time of the local information enabled in the neighbor device, TTL value = TTL multiplier * interval
INT lldpGlobalConfigTxDelay	1.3.6.1.4.1.11863.6.35.1.1.1.4	INTEGER	read-write	The delay time of the local device send the LLDPDU packet to the neighbor device. When the config of the local device is changed, it will notify the neighbor device after the setting time delay, which can avoid continually sending the LLPDDU packet to the neighbor device when local device continually change the config.
INT lldpGlobalConfigInitDelay	1.3.6.1.4.1.11863.6.35.1.1.1.5	INTEGER	read-write	When the LLDP mode is changed, the device will initialize after a setting time delay, which can avoid continually initialized when the device continually change the LLDP mode .
INT lldpGlobalConfigTrap	1.3.6.1.4.1.11863.6.35.1.1.1.6	INTEGER	read-write	The interval of sending the trap information. When a trap event has happened,just as finded a new neighbor or the neighbor information has changed,the local device would send a trap information to the SNMP server.
INT lldpGlobalConfigFastCount	1.3.6.1.4.1.11863.6.35.1.1.1.7	INTEGER	read-write	When the LLDP mode of the port changed from disable(or just receive) to send and receive(or just send), the quick send mechanism will be enabled for other device find the local device as fast as it can,and at this time, the LLDP packet is sended per second, and it get right after sended the setting num LLDPDU packet.
lldpPortConfigTable	1.3.6.1.4.1.11863.6.35.1.1.2		not-accessible	A table that contains LLDP information of every port.
lldpPortConfigEntry	1.3.6.1.4.1.11863.6.35.1.1.2.1		not-accessible	A list of LLDP information for every port of the device.
OCT lldpConfigPortId	1.3.6.1.4.1.11863.6.35.1.1.2.1.1	OCTET STRING	read-only	The port id of the switch.
INT lldpConfigPortStatus	1.3.6.1.4.1.11863.6.35.1.1.2.1.2	INTEGER	read-write	Select Enable/Disable Tx/Rx for the Port. 0. Disable 1. EnableTx 2. EnableRx 3. EnableRxTx
INT lldpConfigPortSnmpNotifyEnable	1.3.6.1.4.1.11863.6.35.1.1.2.1.3	INTEGER	read-write	Select Enable/Disable Snmp Notify for the Port. 0. Disable 1. Enable
INT lldpConfigPortTlvDescr	1.3.6.1.4.1.11863.6.35.1.1.2.1.4	INTEGER	read-write	Select Enable/Disable TLV description for the Port. 0. Disable 1. Enable
INT lldpConfigPortTlvSysCap	1.3.6.1.4.1.11863.6.35.1.1.2.1.5	INTEGER	read-write	Select Enable/Disable TLV system cap for the Port. 0. Disable 1. Enable
INT lldpConfigPortTlvSysDescr	1.3.6.1.4.1.11863.6.35.1.1.2.1.6	INTEGER	read-write	Select Enable/Disable TLV System description for the Port. 0. Disable 1. Enable
INT lldpConfigPortTlvSysName	1.3.6.1.4.1.11863.6.35.1.1.2.1.7	INTEGER	read-write	Select Enable/Disable TLV System name for the Port. 0. Disable 1. Enable
INT lldpConfigPortTlvManageAddr	1.3.6.1.4.1.11863.6.35.1.1.2.1.8	INTEGER	read-write	Select Enable/Disable TLV manage address for the Port. 0. Disable 1. Enable
INT lldpConfigPortTlvPortVlanId	1.3.6.1.4.1.11863.6.35.1.1.2.1.9	INTEGER	read-write	Select Enable/Disable TLV port Vlan ID for the Port. 0. Disable 1. Enable
INT lldpConfigPortTlvProtoVlanId	1.3.6.1.4.1.11863.6.35.1.1.2.1.10	INTEGER	read-write	Select Enable/Disable TLV Portocol VlanId for the Port. 0. Disable 1. Enable
INT lldpConfigPortTlvVlanName	1.3.6.1.4.1.11863.6.35.1.1.2.1.11	INTEGER	read-write	Select Enable/Disable TLV Vlan name for the Port. 0. Disable 1. Enable
INT lldpConfigPortTlvLinkAggre	1.3.6.1.4.1.11863.6.35.1.1.2.1.12	INTEGER	read-write	Select Enable/Disable TLV link aggre for the Port. 0. Disable 1. Enable
INT lldpConfigPortTlvPortStatus	1.3.6.1.4.1.11863.6.35.1.1.2.1.13	INTEGER	read-write	Select Enable/Disable TLV port status for the Port. 0. Disable 1. Enable
INT lldpConfigPortTlvMaxFrame	1.3.6.1.4.1.11863.6.35.1.1.2.1.14	INTEGER	read-write	Select Enable/Disable TLV max frame for the Port. 0. Disable 1. Enable
INT lldpConfigPortTlvPower	1.3.6.1.4.1.11863.6.35.1.1.2.1.15	INTEGER	read-write	Select Enable/Disable TLV power for the Port. 0. Disable 1. Enable

RFC description

Manages LLDP global and port configuration parameters on TP-Link switches.

Start monitoring TP-Link managed switches (LLDP TLV/transmit-timer config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TPLINK-LLDPCONFIG-MIB

What Is TPLINK-LLDPCONFIG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description