TIMETRA-PORT-MIB :: tmnxEqDigitalDiagMonitorClear

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTIMETRA-PORT-MIBtmnxEqDigitalDiagMonitorClear

tmnxEqDigitalDiagMonitorClear

Module: TIMETRA-PORT-MIB

OID (symbolic): TIMETRA-PORT-MIB::tmnxEqDigitalDiagMonitorClear

OID (numeric): 1.3.6.1.4.1.6527.3.1.3.2.2.0.43

Node type: NOTIFICATION-TYPE

Description: Generated when an SFF that supports Digital Diagnostic Monitoring (DDM) clears a failed state.

What is tmnxEqDigitalDiagMonitorClear?

This OID is an alert that triggers when a small form factor transceiver (SFF) recovers from a diagnostic failure detected by its Digital Diagnostic Monitoring sensors. These sensors measure temperature, voltage, and signal strength inside the optics. Operations staff use this alert to track when transceiver problems clear up, helping them understand if a bad module recovered or was replaced.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' TIMETRA-PORT-MIB::tmnxEqDigitalDiagMonitorClear
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.6527.3.1.3.2.2.0.43

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:65186->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (120610466) 13 days, 23:01:44.66
  SNMPv2-MIB::snmpTrapOID.0 = OID: TIMETRA-PORT-MIB::tmnxEqDigitalDiagMonitorClear

Start monitoring Nokia/Alcatel-Lucent 7750 SR (SROS) service router platforms, entire product line (physical port hardware inventory/config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-PORT-MIB::tmnxEqDigitalDiagMonitorClear OID value, configure state conditions and alerts, and monitor any Nokia/Alcatel-Lucent 7750 SR (SROS) service router platforms, entire product line (physical port hardware inventory/config status) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.3tmnxSRNotifyPrefixALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.3.2tmnxHwNotificationALCATEL-IND1-TIMETRA-CHASSIS-MIB
1.3.6.1.4.1.6527.3.1.3.2.2tmnxPortNotifyPrefixALCATEL-IND1-TIMETRA-PORT-MIB
1.3.6.1.4.1.6527.3.1.3.2.2.0tmnxPortNotificationALCATEL-IND1-TIMETRA-PORT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.3.2.2.0.43tmnxEqDigitalDiagMonitorClearTIMETRA-PORT-MIB