TIMETRA-CHASSIS-MIB :: tmnxMDASynchronousEthernet

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTIMETRA-CHASSIS-MIBtmnxMDASynchronousEthernet

tmnxMDASynchronousEthernet

Module: TIMETRA-CHASSIS-MIB

OID (symbolic): TIMETRA-CHASSIS-MIB::tmnxMDASynchronousEthernet

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.2.3.8.1.40

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The value of tmnxMDASynchronousEthernet specifies whether or not the MDA maintains synchronous Ethernet (syncE) communication on all of its ports.

not-applicable - The MDA does not support synchronous Ethernet. enabled - The MDA is in synchronous mode. disabled - The MDA is in asynchronous mode (default).

On MDAs that do not support synchronous ethernet the only supported value is 'not-applicable (0)'.

If tmnxMDASynchronousEthernet is 'enabled (1)' then any port on the MDA can be used as a source port in the tmnxSyncIfTimingTable.

What is tmnxMDASynchronousEthernet?

This holds a timestamp or state value indicating whether a line card (MDA) synchronizes its Ethernet ports to a common clock for precision timing. Synchronous mode ensures all ports tick at identical rates. An operator enables this when deploying services that require clock synchronization across ports, such as pseudowire services.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.2.3.8.1.40
snmpwalk -v2c -c public <target> TIMETRA-CHASSIS-MIB::tmnxMDASynchronousEthernet

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.2.3.8.1.40.1
snmpget -v2c -c public <target> TIMETRA-CHASSIS-MIB::tmnxMDASynchronousEthernet.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6527.3.1.2.2.3.8.1.40.1 i <value>

Start monitoring Nokia/Alcatel-Lucent 7x50 SR-series service routers, entire product line (chassis/slot/port hardware inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-CHASSIS-MIB::tmnxMDASynchronousEthernet OID value, configure state conditions and alerts, and monitor any Nokia/Alcatel-Lucent 7x50 SR-series service routers, entire product line (chassis/slot/port hardware inventory) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2.2tmnxHwObjsALCATEL-IND1-TIMETRA-CHASSIS-MIB
1.3.6.1.4.1.6527.3.1.2.2.3tmnxCardObjsALCATEL-IND1-TIMETRA-CHASSIS-MIB
1.3.6.1.4.1.6527.3.1.2.2.3.8tmnxMDATableALCATEL-IND1-TIMETRA-CHASSIS-MIB
1.3.6.1.4.1.6527.3.1.2.2.3.8.1tmnxMDAEntryALCATEL-IND1-TIMETRA-CHASSIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.2.2.3.8.1.40tmnxMDASynchronousEthernetTIMETRA-CHASSIS-MIB